| Citation: | PENG Xian-long, HU Xi-wen, FANG Zong-de. Active design of face gear drive for modifying ease-off topology flank[J]. Journal of Aerospace Power, 2014, (5): 1216-1222.
|
| [1] |
Litvin F L.Gear geometry and applied theory[M].2nd ed.New York:Cambridge University Press, 2004:508-546.
|
| [2] |
Litvin F L, Egelja A, Tan J, et al.Handbook on face gear drives with a spur involute pinion[R].NASA/CR-2000-209909, 2000.
|
| [3] |
Litvin F L, Fuentes A.Face gear drive with helical involute pinion:geometry, generation by a shaper and a worm, avoidance of singularities and stress analysis[R].NASA/CR-2005-213443, 2005.
|
| [4] |
Zanzi C, Pedrero J I.Application of modified geometry of face gear drive[J].Computer Methods in Applied Mechanics and Engineering, 2005, 194(27/28/29):3047-3066.
|
| [5] |
Litvin F L, Fuentes A, Zanzi C.Design, generation and stress analysis of two version of geometry of face gear drives[J].Mechanism and Machine Theory, 2002, 37(10):1179-1211.
|
| [6] |
Litvin F L, ZHANG Yi.Local synthesis and tooth contact analysis of face milled spiral bevel gears[R].Washington:NASA Center for Aerospace Information, Technical Report 90-C-028, 1991.
|
| [7] |
Litvin F L, Gutman Y.Method of synthesis and analysis for hypoid bear-drives of "formate" and "helixform"[J].Journal of Mechanical Design, 1981, 103(83):2015-2021.
|
| [8] |
CAO Xuemei, FANG Zongde, XU Hao, et al.Design of pinion machine tool setting for spiral bevel gears by controlling contact path and transmission errors[J].Chinese Journal of Aeronautics, 2008, 21(2):179-186.
|
| [9] |
吴训成, 毛世民, 吴序堂.点啮合齿面主动设计研究[J].机械工程学报, 2000, 36(10):70-73. WU Xuncheng, MAO Shimin, WU Xutang.Study on the function-oriented design of point-contact tooth surfaces[J].Chinese Journal of Mechanical Enginerring, 2000, 36(10):70-73.(in Chinese)
|
| [10] |
Shih Y P.A novel ease-off flank modification methodology for spiral bevel and hypoid gears[J].Mechanism and Machine Theory, 2010, 45(8):1108-1124.
|
| [11] |
Kolivand M, Kahraman A.An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations[J].Journal of Mechanical Design, 2010, 132(7):1004-1013.
|
| [12] |
彭先龙, 方宗德, 苏进展, 等.采用碟形砂轮的面齿轮磨齿 方法理论分析[J].航空动力学报, 2012, 27(5):1159-1165. PENG Xianlong, FANG Zongde, SU Jinzhan, et al.Theory analysis for application grinding disk in face gear grinding[J].Journal of Aerospace Power, 2012, 27(5):1159-1165.(in Chinese)
|
| [13] |
Litvin F L, Seol I H, Kim D, et al.Kinematic and geometric models of gear drives[J].Journal of Mechanical Design, 1996, 118(4):544-550.
|
| [14] |
Lee C K.Manufacturing process for a cylindrical crown gear drive with a controllable fourth order polynomial function of transmission error[J].Journal of Materials Processing Technology, 2009, 209(1):3-13.
|
| [15] |
邓效忠.高重合度弧齿锥齿轮加工参数设计与重合度测定[J].机械工程学报, 2004, 40(6):95-99. DENG Xiaozhong.Design and experiment of spiral bevel gears with high contact ratio[J].Chinese Journal of Mechanical Engineering, 2004, 40(6):95-99.(in Chinese)
|
DownLoad: