Volume 39 Issue 10
Oct.  2024
Turn off MathJax
Article Contents
WANG Ziyu, FANG Shuzhou, GUO Jian, et al. Numerical simulation on drag and heat reduction of hypersonic spike-aerodisk-self-coupled stamping lateral jet concept[J]. Journal of Aerospace Power, 2024, 39(10):20220775 doi: 10.13224/j.cnki.jasp.20220775
Citation: WANG Ziyu, FANG Shuzhou, GUO Jian, et al. Numerical simulation on drag and heat reduction of hypersonic spike-aerodisk-self-coupled stamping lateral jet concept[J]. Journal of Aerospace Power, 2024, 39(10):20220775 doi: 10.13224/j.cnki.jasp.20220775

Numerical simulation on drag and heat reduction of hypersonic spike-aerodisk-self-coupled stamping lateral jet concept

doi: 10.13224/j.cnki.jasp.20220775
  • Received Date: 2022-10-08
    Available Online: 2024-04-01
  • The drag and heat reduction effect of hypersonic spike-aerodisk-self-coupled stamping lateral jet configuration was numerically simulated. Compared with the simple spike-aerodisk, the spike-aerodisk-self-coupled stamping lateral jet configuration pushed the shear layer away from the wall, enlarged the recirculation zone near the blunt body, and pushed the separating shock away from the spike. The strength of the attachment shock was significantly weakened, and the drag and heat reduction characteristics of the combined configuration were significantly improved. The drag and heat reduction mechanism of the spike-aerodisk-self-coupled stamping lateral jet configuration was studied, and the influences of different parameters on the drag and heat reduction effect were discussed. Within the study range, the drag and heat reduction effect was continuously improved when the lateral jet angle increased from 30° to 90°, but when the lateral jet angle increased from 90° to 120°, the drag and heat reduction effect decreased slightly. For lateral multiple jets, the farther the second lateral jet was from the blunt body wall surface, the better the drag and heat reduction performance. The configuration with the best drag and heat reduction effect was compared with the configuration with the same parameter spike-aerodisk, finding that the peak value of Stanton number on blunt body wall was reduced by 39.7%, and the drag coefficient of configuration was reduced by 19.3%.

     

  • loading
  • [1]
    AHMED M Y M,QIN N. Recent advances in the aerothermodynamics of spiked hypersonic vehicles[J]. Progress in Aerospace Sciences,2011,47(6): 425-449. doi: 10.1016/j.paerosci.2011.06.001
    [2]
    SUDARSHAN B,DEEP S,JAYARAM V,et al. Experimental study of forward-facing cavity with energy deposition in hypersonic flow conditions[J]. Physics of Fluids,2019,31(10): 106105. doi: 10.1063/1.5118751
    [3]
    ERFANIAN M R,MOGHIMAN M. Experimental investigation of critical air entrainment in ventilated cavitating flow for a forward facing model[J]. Applied Ocean Research,2020,97: 102089. doi: 10.1016/j.apor.2020.102089
    [4]
    ZHOU Zhihua,CHEN Shaowen,LI Weihang,et al. Thermal performance of blade tip and casing coolant injection on a turbine blade with cavity and winglet-cavity tip[J]. International Journal of Heat and Mass Transfer,2019,130: 585-602. doi: 10.1016/j.ijheatmasstransfer.2018.10.130
    [5]
    SU Hao,WANG Jianhua,HE Fei,et al. Numerical investigation on transpiration cooling with coolant phase change under hypersonic conditions[J]. International Journal of Heat and Mass Transfer,2019,129: 480-490. doi: 10.1016/j.ijheatmasstransfer.2018.09.123
    [6]
    SHEN Binxian,YIN Liang,LIU Hongpeng,et al. Thermal protection characteristics for a combinational opposing jet and platelet transpiration cooling nose-tip[J]. Acta Astronautica,2019,155: 143-152. doi: 10.1016/j.actaastro.2018.11.052
    [7]
    MENG Yushan,YAN Li,HUANG Wei,et al. Fluid-thermal coupled investigation on the combinational spike and opposing/lateral jet in hypersonic flows[J]. Acta Astronautica,2021,185: 264-282. doi: 10.1016/j.actaastro.2021.05.022
    [8]
    ZHU Liang,CHEN Xiong,TIAN Xiaotao,et al. Assessment on jet direction effect on drag and heat reduction efficiency for hypersonic vehicles[J]. Aerospace Science and Technology,2020,106: 105932. doi: 10.1016/j.ast.2020.105932
    [9]
    陆海波,刘伟强. 凹腔尺寸对迎风凹腔与逆向喷流组合热防护系统性能的影响[J]. 航空动力学报,2012,27(12): 2666-2673. LU Haibo,LIU Weiqiang. Effect of cavity physical dimension on forward-facing cavity and opposing jet thermal protection system cooling efficiency[J]. Journal of Aerospace Power,2012,27(12): 2666-2673. (in Chinese

    LU Haibo, LIU Weiqiang. Effect of cavity physical dimension on forward-facing cavity and opposing jet thermal protection system cooling efficiency[J]. Journal of Aerospace Power, 2012, 27(12): 2666-2673. (in Chinese)
    [10]
    ZHONG K,YAN C,CHEN S,et al. Aerodisk effects on drag reduction for hypersonic blunt body with an ellipsoid nose[J]. Aerospace Science and Technology,2019,86: 599-612. doi: 10.1016/j.ast.2019.01.027
    [11]
    HUANG Wei,CHEN Zheng,YAN Li,et al. Drag and heat flux reduction mechanism induced by the spike and its combinations in supersonic flows: a review[J]. Progress in Aerospace Sciences,2019,105: 31-39. doi: 10.1016/j.paerosci.2018.12.001
    [12]
    MEHTA R C. Numerical heat transfer study over spiked blunt bodies at Mach 6.8[J]. Journal of Spacecraft and Rockets,2000,37(5): 700-703. doi: 10.2514/2.3622
    [13]
    MEHTA R C. Numerical analysis of pressure oscillations over axisymmetric spiked blunt bodies at Mach 6.80[J]. Shock Waves,2002,11(6): 431-440. doi: 10.1007/s001930200127
    [14]
    KOBAYASHI H,MARU Y,FUKIBA K. Experimental study on aerodynamic characteristics of telescopic aerospikes with multiple disks[J]. Journal of Spacecraft and Rockets,2007,44(1): 33-41. doi: 10.2514/1.25250
    [15]
    KHARATI-KOOPAEE M,GAZOR H. Assessment of the aerodisk size on drag reduction and thermal protection of high-bluntness vehicles at hypersonic speeds[J]. Journal of Aerospace Engineering,2017,30(4): 04017008. doi: 10.1061/(ASCE)AS.1943-5525.0000707
    [16]
    JIANG Zonglin,LIU Yunfeng,HAN Guilai,et al. Experimental demonstration of a new concept of drag reduction and thermal protection for hypersonic vehicles[J]. Acta Mechanica Sinica,2009,25(3): 417-419. doi: 10.1007/s10409-009-0252-8
    [17]
    LIU Yunfeng,JIANG Zonglin. Concept of non-ablative thermal protection system for hypersonic vehicles[J]. AIAA Journal,2013,51(3): 584-590. doi: 10.2514/1.J051875
    [18]
    ZHU Liang,CHEN Xiong,LI Yingkun,et al. Investigation of drag and heat reduction induced by a novel combinational lateral jet and spike concept in supersonic flows based on conjugate heat transfer approach[J]. Acta Astronautica,2018,142: 300-313. doi: 10.1016/j.actaastro.2017.11.001
    [19]
    ZHU Liang,LI Yingkun,CHEN Xiong,et al. Hypersonic flow characteristics and relevant structure thermal response induced by the novel combined spike-aerodome and lateral jet strategy[J]. Aerospace Science and Technology,2019,95: 105459. doi: 10.1016/j.ast.2019.105459
    [20]
    ZHU Liang,LI Yingkun,CHEN Xiong,et al. Novel combinational aerodisk and lateral jet concept for drag and heat reduction in hypersonic flows[J]. Journal of Aerospace Engineering,2019,32(1): 4018133. doi: 10.1061/(ASCE)AS.1943-5525.0000966
    [21]
    HAYASHI K,ASO S,TANI Y. Experimental study on thermal protection system by opposing jet in supersonic flow[J]. Journal of Spacecraft and Rockets,2006,43(1): 233-235. doi: 10.2514/1.15332
    [22]
    NARAYANA G,SELVARAJ S. Experimental investigation of heat transfer over double disk spike-blunt body at Mach 5.7[J]. Experimental Thermal and Fluid Science,2019,102: 452-466. doi: 10.1016/j.expthermflusci.2018.12.004
    [23]
    SPAID F W,ZUKOSKI E E. A study of the interaction of gaseous jets from transverse slots with supersonic external flows[J]. AIAA Journal,1968,6(2): 205-212. doi: 10.2514/3.4479
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (370) PDF downloads(46) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return