| Citation: | LIU Guoqing, ZHENG Shaofei, YANG Yanru, et al. Fluid flow and heat transfer of ribbed channel based on the hierarchical design concept[J]. Journal of Aerospace Power, 2024, 39（10）：20220861 doi: 10.13224/j.cnki.jasp.20220861
|
Using the numerical simulation, the fluid flow and heat transfer characteristics of a ribbed channel considering four rib configurations (transverse ribs, inclined ribs, V-shaped ribs, and inverse V-shaped ribs) and two designs (uniform design and hierarchical design) were studied for verifying the effectiveness of the hierarchical design concept. The results demonstrated that using the hierarchical design, the heat transfer performances of four kinds of ribs slightly decreased, the transverse rib had a minimum reduction below than 3.00%, while the inclined rib presented a maximum reduction up to 12.76%; the flow resistance was significantly reduced, the transverse rib had a minimum reduction with the decreased friction factor by 36.15%—37.67%, the inverse V-shaped rib had a maximum reduction with the decreased friction factor by 46.98%—50.32%; as a result, the hierarchical design effectively improved the overall cooling performance of the ribbed channel with a reduction of 81.29% for the inverse V-shaped rib at Reynolds number of 100000. The slight reduction of the heat transfer performance and the marked resistance reduction came from the combination of the constrained secondary flows and the lowering effect of the mainstream.
| [1] |
HAN J C,DUTTA S,EKKAD S. Gas turbine heat transfer and cooling Technology[M]. Boca Raton: CRC Press,2012.
|
| [2] |
HAN J C. Advanced cooling in gas turbines 2016 max Jakob memorial award paper[J]. Journal of Heat Transfer,2018,140(11): 113001. doi: 10.1115/1.4039644
|
| [3] |
YERANEE K,RAO Yu. A review of recent studies on rotating internal cooling for gas turbine blades[J]. Chinese Journal of Aeronautics,2021,34(7): 85-113. doi: 10.1016/j.cja.2020.12.035
|
| [4] |
LI Xin,XIE Gongnan,LIU Jian,et al. Parametric study on flow characteristics and heat transfer in rectangular channels with strip slits in ribs on one wall[J]. International Journal of Heat and Mass Transfer,2020,149: 118396. doi: 10.1016/j.ijheatmasstransfer.2019.07.046
|
| [5] |
苏生,胡捷,刘建军,等. 交替大小肋片方腔通道内换热性能的数值模拟[J]. 航空动力学报,2008,23(12): 2274-2279. SU Sheng,HU Jie,LIU Jianjun,et al. Numerical simulation on heat transfer in duct roughened by periodic alternate scale ribs[J]. Journal of Aerospace Power,2008,23(12): 2274-2279. (in Chinese
SU Sheng, HU Jie, LIU Jianjun, et al. Numerical simulation on heat transfer in duct roughened by periodic alternate scale ribs[J]. Journal of Aerospace Power, 2008, 23(12): 2274-2279. (in Chinese)
|
| [6] |
RAO Yu,ZHANG Peng,XU Yamin,et al. Experimental study and numerical analysis of heat transfer enhancement and turbulent flow over shallowly dimpled channel surfaces[J]. International Journal of Heat and Mass Transfer,2020,160: 120195. doi: 10.1016/j.ijheatmasstransfer.2020.120195
|
| [7] |
XIE Yonghui,SHI Dongbo,SHEN Zhongyang. Experimental and numerical investigation of heat transfer and friction performance for turbine blade tip cap with combined pin-fin-dimple/protrusion structure[J]. International Journal of Heat and Mass Transfer,2017,104: 1120-1134. doi: 10.1016/j.ijheatmasstransfer.2016.09.032
|
| [8] |
LEE J,REN Zhong,LIGRANI P,et al. Crossflows from jet array impingement cooling: hole spacing,target plate distance,Reynolds number effects[J]. International Journal of Thermal Sciences,2015,88: 7-18. doi: 10.1016/j.ijthermalsci.2014.09.003
|
| [9] |
HAN J C,ZHANG Y M,LEE C P. Augmented heat transfer in square channels with parallel,crossed,and V-shaped angled ribs[J]. Journal of Heat Transfer,1991,113(3): 590-596. doi: 10.1115/1.2910606
|
| [10] |
PARK J S,HAN J C,HUANG Y,et al. Heat transfer performance comparisons of five different rectangular channels with parallel angled ribs[J]. International Journal of Heat and Mass Transfer,1992,35(11): 2891-2903. doi: 10.1016/0017-9310(92)90309-G
|
| [11] |
李建华,宋双文,杨卫华,等. 不同结构肋化通道对流换热特性的试验[J]. 航空动力学报,2007,22(10): 1663-1666. LI Jianhua,SONG Shuangwen,YANG Weihua,et al. Study of convective heat transfer in channels with different geometrical ribs[J]. Journal of Aerospace Power,2007,22(10): 1663-1666. (in Chinese
LI Jianhua, SONG Shuangwen, YANG Weihua, et al. Study of convective heat transfer in channels with different geometrical ribs[J]. Journal of Aerospace Power, 2007, 22(10): 1663-1666. (in Chinese)
|
| [12] |
KAMALI R,BINESH A R. The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces[J]. International Communications in Heat and Mass Transfer,2008,35(8): 1032-1040. doi: 10.1016/j.icheatmasstransfer.2008.04.012
|
| [13] |
邱庆刚,王海鹏,赵亮,等. 楔形肋片内冷通道传热与流动阻力特性[J]. 航空动力学报,2011,26(12): 2648-2654. QIU Qinggang,WANG Haipeng,ZHAO Liang,et al. Heat transfer and friction behavior in internal cooling duct with cuniform-fins[J]. Journal of Aerospace Power,2011,26(12): 2648-2654. (in Chinese
QIU Qinggang, WANG Haipeng, ZHAO Liang, et al. Heat transfer and friction behavior in internal cooling duct with cuniform-fins[J]. Journal of Aerospace Power, 2011, 26(12): 2648-2654. (in Chinese)
|
| [14] |
XIE Gongnan,LIU Xueting,YAN Hongbin,et al. Turbulent flow characteristics and heat transfer enhancement in a square channel with various crescent ribs on one wall[J]. International Journal of Heat and Mass Transfer,2017,115: 283-295. doi: 10.1016/j.ijheatmasstransfer.2017.07.012
|
| [15] |
吴榕,缪克克,侯昶. 涡轮叶片通道内部V型间断肋的传热特性研究[J]. 航空动力学报,2023,38(12): 2817-2828. WU Rong,MIAO Keke,HOU Chang. Study on heat transfer characteristics of V-shaped discrete ribs in turbine blade passage[J]. Journal of Aerospace Power,2023,38(12): 2817-2828. (in Chinese
WU Rong, MIAO Keke, HOU Chang. Study on heat transfer characteristics of V-shaped discrete ribs in turbine blade passage[J]. Journal of Aerospace Power, 2023, 38(12): 2817-2828. (in Chinese)
|
| [16] |
朱强华,崔苗,高效伟. 带斜孔肋大宽高比矩形通道的强化传热特性[J]. 航空动力学报,2016,31(4): 780-787. ZHU Qianghua,CUI Miao,GAO Xiaowei. Enhanced heat transfer characteristics in a large aspect ratio rectangular channel with inclined perforated rib[J]. Journal of Aerospace Power,2016,31(4): 780-787. (in Chinese
ZHU Qianghua, CUI Miao, GAO Xiaowei. Enhanced heat transfer characteristics in a large aspect ratio rectangular channel with inclined perforated rib[J]. Journal of Aerospace Power, 2016, 31(4): 780-787. (in Chinese)
|
| [17] |
李彦霖,饶宇,王德强. 涡轮叶片冷却通道高性能微小肋湍流传热的数值研究[J]. 工程热物理学报,2018,39(10): 2271-2279. LI Yanlin,RAO Yu,WANG Deqiang. Numerical study on turbulent heat transfer of miniature ribs in turbine blade internal passage[J]. Journal of Engineering Thermophysics,2018,39(10): 2271-2279. (in Chinese
LI Yanlin, RAO Yu, WANG Deqiang. Numerical study on turbulent heat transfer of miniature ribs in turbine blade internal passage[J]. Journal of Engineering Thermophysics, 2018, 39(10): 2271-2279. (in Chinese)
|
| [18] |
ZHANG Dawei,LI Haiwang,TIAN Yitu,et al. Effects of a high Reynolds number and rotation on the leading-edge heat transfer of a ribbed cooling channel with a cross-section consisting of a semicircle and a rectangle[J]. International Journal of Heat and Mass Transfer,2022,188: 122646. doi: 10.1016/j.ijheatmasstransfer.2022.122646
|
| [19] |
LIGRANI P M,OLIVEIRA M M,BLASKOVICH T. Comparison of heat transfer augmentation techniques[J]. AIAA Journal,2003,41(3): 337-362. doi: 10.2514/2.1964
|
| [20] |
ZHENG Shaofei,LIU Guoqing,LIAN Wenkai,et al. Fluid flow and heat transfer in a rectangular ribbed channel with a hierarchical design for turbine blade internal cooling[J]. Applied Thermal Engineering,2022,217: 119183. doi: 10.1016/j.applthermaleng.2022.119183
|
| [21] |
LIU Jian,HUSSAIN S,WANG Wei,et al. Heat transfer enhancement and turbulent flow in a rectangular channel using perforated ribs with inclined holes[J]. Journal of Heat Transfer,2019,141(4): 041702. doi: 10.1115/1.4042841
|
| [22] |
ZHANG Guohua,SUNDÉN B,XIE Gongnan. Combined experimental and numerical investigations on heat transfer augmentation in truncated ribbed channels designed by adopting fractal theory[J]. International Communications in Heat and Mass Transfer,2021,121: 105080. doi: 10.1016/j.icheatmasstransfer.2020.105080
|
DownLoad:
