| Citation: | JIANG Feng, HONG Linxiong, LI Huacong. Interval uncertainty analysis method based on adaptive radial basis function model[J]. Journal of Aerospace Power, 2024, 39(11):20220874 doi: 10.13224/j.cnki.jasp.20220874 |
Considering the problem of interval uncertainty analysis, an adaptive uncertainty analysis method based on radial basis function model was proposed. Firstly, an acquisition function, also called the potential maximum function, which can be combined with the radial basis function model, was presented, and subdivided into potential maximum/minimum functions according to the characteristics of the maximum/minimum problem. Then, for the interval uncertainty analysis problem, a sequential optimization framework based on the potential maximum/minimum function was established to complete the efficient and high-precision solution of the interval uncertainty analysis problem. Three examples showed that, the proposed method can improve the computational efficiency of particle swarm optimization (PSO) and vertex method with accurate solution; also, the method refined the model sequentially through the proposed acquisition function, so compared with the method in which the Latin hypercube sampling is used to perform the “one-shot” sampling for radial basis function model constructing, and the response bounds is estimated through particle swarm optimization (LHS+PSO), it can guarantee the accuracy of the predicted bounds by improving approximate accuracy of the model in local regions.
| [1] |
HELTON J C. Uncertainty and sensitivity analysis in the presence of stochastic and subjective uncertainty[J]. Journal of Statistical Computation and Simulation,1997,57(1/2/3/4): 3-76. doi: 10.1080/00949659708811803
|
| [2] |
李杰. 工程结构整体可靠性分析研究进展[J]. 土木工程学报,2018,51(8): 1-10. LI Jie. Advances in global reliability analysis of engineering structures[J]. China Civil Engineering Journal,2018,51(8): 1-10. (in Chinese
LI Jie. Advances in global reliability analysis of engineering structures[J]. China Civil Engineering Journal, 2018, 51(8): 1-10. (in Chinese)
|
| [3] |
ELISHAKOFF I. Essay on uncertainties in elastic and viscoelastic structures: from A. M. Freudenthal’s criticisms to modern convex modeling[J]. Computers & Structures,1995,56(6): 871-895.
|
| [4] |
杨旭锋. 含认知不确定性参数的高效高精度可靠性分析方法研究[D]. 西安: 西北工业大学,2016. YANG Xufeng. Research on highly efficient and precise methods for reliability analysis with epistemic uncertainties[D]. Xi’an: Northwestern Polytechnical University,2016. (in Chinese
YANG Xufeng. Research on highly efficient and precise methods for reliability analysis with epistemic uncertainties[D]. Xi’an: Northwestern Polytechnical University, 2016. (in Chinese)
|
| [5] |
BALU A S,RAO B N. High dimensional model representation based formulations for fuzzy finite element analysis of structures[J]. Finite Elements in Analysis and Design,2012,50: 217-230. doi: 10.1016/j.finel.2011.09.012
|
| [6] |
SHAH H,HOSDER S,WINTER T. Quantification of margins and mixed uncertainties using evidence theory and stochastic expansions[J]. Reliability Engineering & System Safety,2015,138: 59-72.
|
| [7] |
MOORE R E. Methods and applications of interval analysis[M]. Philadelphia,US: Society for Industrial and Applied Mathematics,1979.
|
| [8] |
傅超,任兴民,杨永锋,等. 正交多项式在不确定转子动态响应计算中的应用及对比分析[J]. 航空动力学报,2018,33(9): 2228-2234. FU Chao,REN Xingmin,YANG Yongfeng,et al. Application and comparative analysis of orthogonal polynomials in uncertain rotor dynamic response calculation[J]. Journal of Aerospace Power,2018,33(9): 2228-2234. (in Chinese
FU Chao, REN Xingmin, YANG Yongfeng, et al. Application and comparative analysis of orthogonal polynomials in uncertain rotor dynamic response calculation[J]. Journal of Aerospace Power, 2018, 33(9): 2228-2234. (in Chinese)
|
| [9] |
胡计雨. 声学超材料不确定性分析及其车内降噪应用研究[D]. 长沙: 湖南大学,2018. HU Jiyu. Research on the uncertainty analysis and the application in car interior noise control of acoustic metamaterials[D]. Changsha: Hunan University,2018. (in Chinese
HU Jiyu. Research on the uncertainty analysis and the application in car interior noise control of acoustic metamaterials[D]. Changsha: Hunan University, 2018. (in Chinese)
|
| [10] |
朱颖,田玉基. 基于区间理论的不确定结构随机疲劳损伤估计方法[J]. 工程力学,2017,34(8): 1-9. ZHU Ying,TIAN Yuji. Study on random fatigue analysis method of uncertainty structure based on interval theory[J]. Engineering Mechanics,2017,34(8): 1-9. (in Chinese
ZHU Ying, TIAN Yuji. Study on random fatigue analysis method of uncertainty structure based on interval theory[J]. Engineering Mechanics, 2017, 34(8): 1-9. (in Chinese)
|
| [11] |
JANSSON C. Calculation of exact bounds for the solution set of linear interval systems[J]. Linear Algebra and Its Applications,1997,251: 321-340. doi: 10.1016/S0024-3795(96)00681-7
|
| [12] |
QIU Zhiping,LV Zheng. The vertex solution theorem and its coupled framework for static analysis of structures with interval parameters[J]. International Journal for Numerical Methods in Engineering,2017,112(7): 711-736. doi: 10.1002/nme.5523
|
| [13] |
FUJITA K,TAKEWAKI I. An efficient methodology for robustness evaluation by advanced interval analysis using updated second-order Taylor series expansion[J]. Engineering Structures,2011,33(12): 3299-3310. doi: 10.1016/j.engstruct.2011.08.029
|
| [14] |
QIU Zhiping,WANG Xiaojun. Parameter perturbation method for dynamic responses of structures with uncertain-but-bounded parameters based on interval analysis[J]. International Journal of Solids and Structures,2005,42(18/19): 4958-4970.
|
| [15] |
FU C M,CAO L X,TANG J C,et al. A subinterval decomposition analysis method for uncertain structures with large uncertainty parameters[J]. Computers & Structures,2018,197: 58-69.
|
| [16] |
WANG Chong,QIU Zhiping,CHEN Xianjia. Uncertainty analysis for heat convection-diffusion problem with large uncertain-but-bounded parameters[J]. Acta Mechanica,2015,226(11): 3831-3844. doi: 10.1007/s00707-015-1441-0
|
| [17] |
魏彤辉. 基于函数分解法的结构区间分析及优化设计[D]. 长春: 吉林大学,2022. WEI Tonghui. Structural interval analysis and optimization design based on function decomposition method[D]. Changchun: Jilin University,2022. (in Chinese
WEI Tonghui. Structural interval analysis and optimization design based on function decomposition method[D]. Changchun: Jilin University, 2022. (in Chinese)
|
| [18] |
JI Lei,CHEN Guangsong,QIAN Linfang,et al. An iterative interval analysis method based on Kriging-HDMR foruncertainty problems[J]. Acta Mechanica Sinica,2022,38(7): 521378. doi: 10.1007/s10409-022-09018-x
|
| [19] |
LIU Yisi,WANG Xiaojun,WANG Lei. Interval uncertainty analysis for static response of structures using radial basis functions[J]. Applied Mathematical Modelling,2019,69: 425-440. doi: 10.1016/j.apm.2018.12.018
|
| [20] |
WU Jinglai,ZHANG Yunqing,CHEN Liping,et al. A Chebyshev interval method for nonlinear dynamic systems under uncertainty[J]. Applied Mathematical Modelling,2013,37(6): 4578-4591. doi: 10.1016/j.apm.2012.09.073
|
| [21] |
CICIRELLO A,GIUNTA F. Machine learning based optimization for interval uncertainty propagation[J]. Mechanical Systems and Signal Processing,2022,170: 108619. doi: 10.1016/j.ymssp.2021.108619
|
| [22] |
LIU Yisi,WANG Xiaojun,WANG Lei,et al. A Bayesian collocation method for static analysis of structures with unknown-but-bounded uncertainties[J]. Computer Methods in Applied Mechanics and Engineering,2019,346: 727-745. doi: 10.1016/j.cma.2018.08.043
|
| [23] |
WAN Huaping,NI Yiqing. A new approach for interval dynamic analysis of train-bridge system based on Bayesian optimization[J]. Journal of Engineering Mechanics,2020,146(5): 04020029. doi: 10.1061/(ASCE)EM.1943-7889.0001735
|
| [24] |
DANG Chao,WEI Pengfei,FAES M G R,et al. Interval uncertainty propagation by a parallel Bayesian global optimization method[J]. Applied Mathematical Modelling,2022,108: 220-235. doi: 10.1016/j.apm.2022.03.031
|
| [25] |
LIU Yisi,WANG Xiaojun,WANG Lei. A dynamic evolution scheme for structures with interval uncertainties by using bidirectional sequential Kriging method[J]. Computer Methods in Applied Mechanics and Engineering,2019,348: 712-729. doi: 10.1016/j.cma.2019.01.041
|
| [26] |
FENG Shaojun,HAO Peng,LIU Hao,et al. A data-driven Kriging model based on adversarial learning for reliability assessment[J]. Structural and Multidisciplinary Optimization,2022,65(1): 27. doi: 10.1007/s00158-021-03140-6
|
| [27] |
HAO Peng,FENG Shaojun,LIU Hao,et al. A novel Nested Stochastic Kriging model for response noise quantification and reliability analysis[J]. Computer Methods in Applied Mechanics and Engineering,2021,384: 113941. doi: 10.1016/j.cma.2021.113941
|
| [28] |
李正良,彭思思,王涛. 基于混合加点准则的代理模型优化设计方法[J]. 工程力学,2022,39(1): 27-33. LI Zhengliang,PENG Sisi,WANG Tao. A surrogate-based optimization design method based on hybrid infill sampling criterion[J]. Engineering Mechanics,2022,39(1): 27-33. (in Chinese
LI Zhengliang, PENG Sisi, WANG Tao. A surrogate-based optimization design method based on hybrid infill sampling criterion[J]. Engineering Mechanics, 2022, 39(1): 27-33. (in Chinese)
|
| [29] |
JIN Ruichen,CHEN Wei,SIMPSON T. Comparative studies of metamodeling techniques under multiple modeling criteria: AIAA2000-4801 [R]. Reston,US: AIAA,2000.
|
| [30] |
MOORE R. Interval analysis prentice-hall[M]. Englewood,US: Prentice Hall,1966.
|
| [31] |
唐嘉昌. 基于区间不确定性的工程反问题方法研究[D]. 长沙: 湖南大学,2020. TANG Jiachang. The research on computational methods for engineering inverse problems under interval uncertainty[D]. Changsha: Hunan University,2020. (in Chinese
TANG Jiachang. The research on computational methods for engineering inverse problems under interval uncertainty[D]. Changsha: Hunan University, 2020. (in Chinese)
|
| [32] |
HONG Linxiong,LI Huacong,PENG Kai. A combined radial basis function and adaptive sequential sampling method for structural reliability analysis[J]. Applied Mathematical Modelling,2021,90: 375-393. doi: 10.1016/j.apm.2020.08.042
|
| [33] |
叶年辉,龙腾,武宇飞,等. 基于Kriging代理模型的约束差分进化算法[J]. 航空学报,2021,42(6): 324580. YE Nianhui,LONG Teng,WU Yufei,et al. Kriging-assisted constrained differential evolution algorithm[J]. Acta Aeronautica et Astronautica Sinica,2021,42(6): 324580. (in Chinese
YE Nianhui, LONG Teng, WU Yufei, et al. Kriging-assisted constrained differential evolution algorithm[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(6): 324580. (in Chinese)
|
| [34] |
JONES D R,SCHONLAU M,WELCH W J. Efficient global optimization of expensive black-box functions[J]. Journal of Global Optimization,1998,13(4): 455-492. doi: 10.1023/A:1008306431147
|
| [35] |
HONG Linxiong,LI Huacong,FU Jiangfeng,et al. Hybrid active learning method for non-probabilistic reliability analysis with multi-super-ellipsoidal model[J]. Reliability Engineering & System Safety,2022,222: 108414.
|
| [36] |
MEZURA-MONTES E,COELLO COELLO C A. Constraint-handling in nature-inspired numerical optimization: past,present and future[J]. Swarm and Evolutionary Computation,2011,1(4): 173-194. doi: 10.1016/j.swevo.2011.10.001
|
| [37] |
ZHANG Yishang,LIU Yongshou,YANG Xufeng,et al. An efficient Kriging method for global sensitivity of structural reliability analysis with non-probabilistic convex model[J]. Proceedings of the Institution of Mechanical Engineers: Part O Journal of Risk and Reliability,2015,229(5): 442-455.
|
| [38] |
武泽平,王东辉,杨希祥,等. 应用径向基代理模型实现序列自适应再采样优化策略[J]. 国防科技大学学报,2014,36(6): 18-24. WU Zeping,WANG Donghui,YANG Xixiang,et al. Adaptive resampling strategy of sequential optimization based on radial basis function surrogate model[J]. Journal of National University of Defense Technology,2014,36(6): 18-24. (in Chinese
WU Zeping, WANG Donghui, YANG Xixiang, et al. Adaptive resampling strategy of sequential optimization based on radial basis function surrogate model[J]. Journal of National University of Defense Technology, 2014, 36(6): 18-24. (in Chinese)
|
| [39] |
SONG Jingwen,WEI Pengfei,VALDEBENITO M A,et al. Data-driven and active learning of variance-based sensitivity indices with Bayesian probabilistic integration[J]. Mechanical Systems and Signal Processing,2022,163: 108106. doi: 10.1016/j.ymssp.2021.108106
|