| Citation: | GUO Yingzhao, CUI Haitao, WEN Weidong, et al. Parametric modeling method and mechanical behavior of 3D woven composites with warp insertion[J]. Journal of Aerospace Power, 2024, 39（11）：20220950 doi: 10.13224/j.cnki.jasp.20220950
|
To describe the microstructure and mechanical behavior of woven composites more accurately, a parametric model construction method for 3D woven composites with warp insertion was established. The equality constraints among the parameters in the geometric model were investigated, and the geometric constraint model was developed to realize the parametric description of the geometric model. Based on the geometric constraint model, the construction method of the parametric model was discussed, and the mapping relationship between the geometric model and the actual structure was established by input parameters, which improved the reduction degree of the geometric model to the actual structure, providing a guidance for material analysis and design. The progressive damage model was applied to predict the strength of 3D woven composites in the warp direction, and the prediction results were compared with the experimental results. Under the tensile load, the failure mode of the warp and binder yarn was mainly longitudinal fracture, the failure mode of the weft yarn was transverse fracture, and the failure mode of the resin-rich region was tensile fracture. The predicted strength of the material in the warp direction was 853.6 MPa, with a relative error of 2.3%, which was basically consistent with the experimental results.
| [1] |
LIU Gang,ZHANG Li,GUO Licheng,et al. Multi-scale progressive failure simulation of 3D woven composites under uniaxial tension[J]. Composite Structures,2019,208: 233-243. doi: 10.1016/j.compstruct.2018.09.081
|
| [2] |
MOUNTASIR A,HOFFMANN G,CHERIF C,et al. Competitive manufacturing of 3D thermoplastic composite panels based on multi-layered woven structures for lightweight engineering[J]. Composite Structures,2015,133: 415-424. doi: 10.1016/j.compstruct.2015.07.071
|
| [3] |
HUANG Tao,WANG Yanling,WANG Gang. Review of the mechanical properties of a 3D woven composite and its applications[J]. Polymer-Plastics Technology and Engineering,2018,57(8): 740-756. doi: 10.1080/03602559.2017.1344857
|
| [4] |
MARSH G. Aero engines lose weight thanks to composites[J]. Reinforced Plastics,2012,56(6): 32-35. doi: 10.1016/S0034-3617(12)70146-7
|
| [5] |
ISART N,EL SAID B,IVANOV D S,et al. Internal geometric modelling of 3D woven composites: a comparison between different approaches[J]. Composite Structures,2015,132: 1219-1230. doi: 10.1016/j.compstruct.2015.07.007
|
| [6] |
LI Haolin,BACARREZA O,KHODAEI Z S,et al. Probabilistic multi-scale design of 2D plain woven composites considering meso-scale uncertainties[J]. Composite Structures,2022,300: 116099. doi: 10.1016/j.compstruct.2022.116099
|
| [7] |
ZHANG Yuyang,LI Huimin,GAO Yihang,et al. Multi-scale modeling and elastic properties prediction of 3D four-directional tubular braided composites[J]. Composite Structures,2022,292: 115632. doi: 10.1016/j.compstruct.2022.115632
|
| [8] |
YANG Xue,AI Jing,ZHU Hao,et al. Multi-directional compression behaviors and failure mechanisms of 3D orthogonal woven composites: Parametric modeling and strength prediction[J]. Materials & Design,2022,222: 111108.
|
| [9] |
GUO Junhua,WEN Weidong,ZHANG Hongjian,et al. Investigation of mechanical properties for 2.5D woven composites with different weft-layer-numbers by a triple-cell model system[J]. Journal of Industrial Textiles,2022,51(3): 5243S-5285S. doi: 10.1177/1528083720958046
|
| [10] |
GUO Junhua,WEN Weidong,ZHANG Hongjian,et al. Mechanical properties prediction of 2.5D woven composites via voxel-mesh full-cell model[J]. Fibers and Polymers,2021,22(7): 1899-1914. doi: 10.1007/s12221-021-0153-4
|
| [11] |
GUO Junhua,WEN Weidong,ZHANG Hongjian,et al. Representative cell modeling strategy of 2.5D woven composites considering the randomness of weft cross-section for mechanical properties prediction[J]. Engineering Fracture Mechanics,2020,237: 107255. doi: 10.1016/j.engfracmech.2020.107255
|
| [12] |
WARREN K C,LOPEZ-ANIDO R A,GOERING J. Experimental investigation of three-dimensional woven composites[J]. Composites Part A: Applied Science and Manufacturing,2015,73: 242-259. doi: 10.1016/j.compositesa.2015.03.011
|
| [13] |
DAI S,CUNNINGHAM P R. Multi-scale damage modelling of 3D woven composites under uni-axial tension[J]. Composite Structures,2016,142: 298-312. doi: 10.1016/j.compstruct.2016.01.103
|
| [14] |
LU Zixing,ZHOU Yuan,YANG Zhenyu,et al. Multi-scale finite element analysis of 2.5D woven fabric composites under on-axis and off-axis tension[J]. Computational Materials Science,2013,79: 485-494. doi: 10.1016/j.commatsci.2013.07.003
|
| [15] |
LU Huaiyu,GUO Licheng,LIU Gang,et al. Progressive damage investigation of 2.5D woven composites under quasi-static tension[J]. Acta Mechanica,2019,230(4): 1323-1336. doi: 10.1007/s00707-017-2024-z
|
| [16] |
SONG Jian,WEN Weidong,CUI Haitao. Experimental and numerical investigation of mechanical behaviors of 2.5D woven composites at ambient and un-ambient temperatures[J]. Composite Structures,2018,201: 699-720. doi: 10.1016/j.compstruct.2018.06.054
|
| [17] |
SONG Jian,LIU Lu,LI Lixiao,et al. Thermo-mechanical responses of notched layer-to-layer 3D angle-interlock woven composites[J]. Composites Part B: Engineering,2019,176: 107262. doi: 10.1016/j.compositesb.2019.107262
|
| [18] |
ZHONG Suyang,GUO Licheng,LIU Gang,et al. A continuum damage model for three-dimensional woven composites and finite element implementation[J]. Composite Structures,2015,128: 1-9. doi: 10.1016/j.compstruct.2015.03.030
|
| [19] |
ZHENG Tao,GUO Licheng,SUN Ruijian,et al. Investigation on the compressive damage mechanisms of 3D woven composites considering stochastic fiber initial misalignment[J]. Composites Part A: Applied Science and Manufacturing,2021,143: 106295. doi: 10.1016/j.compositesa.2021.106295
|
| [20] |
ZHENG Tao,GUO Licheng,HUANG Jinzhao,et al. A novel mesoscopic progressive damage model for 3D angle-interlock woven composites[J]. Composites Science and Technology,2020,185: 107894. doi: 10.1016/j.compscitech.2019.107894
|
| [21] |
ZHENG Tao,GUO Licheng,DING Junfeng,et al. An innovative micromechanics-based multiscale damage model of 3D woven composites incorporating probabilistic fiber strength distribution[J]. Composite Structures,2022,287: 115345. doi: 10.1016/j.compstruct.2022.115345
|
| [22] |
ZHENG Tao,GUO Licheng,BENEDICTUS R,et al. Micromechanics-based multiscale progressive failure simulation of 3D woven composites under compressive loading with minimal material parameters[J]. Composites Science and Technology,2022,219: 109227. doi: 10.1016/j.compscitech.2021.109227
|
| [23] |
ZHANG Yifan,GUO Qiwei,CHEN Xiaoming,et al. Effect of apertures on tensile property of warp-reinforced 2.5D woven composites notched plates[J]. Composite Structures,2020,252: 112693. doi: 10.1016/j.compstruct.2020.112693
|
| [24] |
GUO Qiwei,ZHANG Yifan,LI Diansen,et al. Experimental and numerical investigation of open-hole tensile properties and damage mechanisms of 3D woven composites under weft-loading[J]. Thin-Walled Structures,2021,161: 107455. doi: 10.1016/j.tws.2021.107455
|
| [25] |
ZHANG Yifan,LI Mohan,GUO Qiwei,et al. Tensile failure of multiaxial 3D woven composites with an open-hole: an experimental and numerical study[J]. Composite Structures,2022,279: 114746. doi: 10.1016/j.compstruct.2021.114746
|
| [26] |
GUO Qiwei,ZHANG Yifan,LI Diansen,et al. Tensile properties and failure mechanism of 3D woven composites containing holes of different geometries[J]. Thin-Walled Structures,2021,166: 108115. doi: 10.1016/j.tws.2021.108115
|
| [27] |
GUO Licheng,HUANG Jinzhao,ZHANG Li,et al. Damage evolution of 3D woven carbon/epoxy composites under tension-tension fatigue loading based on synchrotron radiation computed tomography (SRCT)[J]. International Journal of Fatigue,2021,142: 105913. doi: 10.1016/j.ijfatigue.2020.105913
|
| [28] |
LIN Hua,BROWN L P,LONG A C. Modelling and simulating textile structures using TexGen[J]. Advanced Materials Research,2011,331: 44-47. doi: 10.4028/www.scientific.net/AMR.331.44
|
| [29] |
HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics,1980,47(2): 329-334. doi: 10.1115/1.3153664
|
| [30] |
TSCHOEGL N W. Failure surfaces in principal stress space[J]. Journal of Polymer Science Part C: Polymer Symposia,1971,32(1): 239-267. doi: 10.1002/polc.5070320113
|
| [31] |
SENDECKYJ G P,WANG S S,STEVEN JOHNSON W,et al. Mechanics of composite materials: past,present,and future[J]. Journal of Composites Technology and Research,1989,11(1): 3. doi: 10.1520/CTR10143J
|
| [32] |
ZAKO M,UETSUJI Y,KURASHIKI T. Finite element analysis of damaged woven fabric composite materials[J]. Composites Science and Technology,2003,63(3/4): 507-516.
|
| [33] |
BAŽANT Z P,OH B H. Crack band theory for fracture of concrete[J]. Matériaux et Construction,1983,16(3): 155-177.
|
| [34] |
FANG Guodong,LIANG Jun,LU Qi,et al. Investigation on the compressive properties of the three dimensional four-directional braided composites[J]. Composite Structures,2011,93(2): 392-405. doi: 10.1016/j.compstruct.2010.09.002
|
DownLoad:
