| Citation: | WANG Pan, TANG Zijie, LI Qing, et al. Current research development and future prospects of simulation method for aero engine overall performance in variable dimensions[J]. Journal of Aerospace Power, 2025, 40（2）：20230418 doi: 10.13224/j.cnki.jasp.20230418
|
With the increasing effects of gas turbine components interaction and multidisciplinary coupling, incorporating higher-dimensional factors into zero-dimensional overall performance it is of important role and significance to introduce high-dimensional factors and conduct a variable-dimensional simulation in the zero-dimensional overall performance simulation of aero-engines. The background of variable-dimensional methods is analyzed, the development status of the variable-dimensional method is clarified, and the different technical paths for realizing variable-dimensional simulation are compared and analyzed and the application results of the variable-dimensional hybrid simulation methods are summarized with the inlet, fan/compressor, tail nozzle, and core engine/low-pressure system as specific objects in this paper. The results show that the variable-dimensional simulation method can effectively improve the system-level performance simulation accuracy of the whole machine, for which the autonomous and controllable 0D to 3D program is the basis for implementation. Partial coupling or characteristic correction methods have the most advantages in terms of accuracy, time consumption, flexibility, etc. The research on variable-dimensional performance simulation under the influence of new configuration engines (such as variable cycle engines) and the real working environments (such as rain swallowing) should be focused on.
| [1] |
VISSER W. Generic analysis methods for gas turbine engine performance: the development of the gas turbine simulation program GSP[D]. Delft: Ipskamp Drukkers,2015.
|
| [2] |
宴武英. 美欧航空发动机重大科技专项计划分析[J]. 航空动力,2021,2: 39-44. YAN Wuying. Analysis of major science and technology projects for aircraft engines in the united states and europe[J]. Journal of Aerospace Power,2021,2: 39-44. (in Chinese
YAN Wuying. Analysis of major science and technology projects for aircraft engines in the united states and europe[J]. Journal of Aerospace Power, 2021, 2: 39-44. (in Chinese)
|
| [3] |
宴武英. 美国新一代国家级军用航空动力预研计划分析[J]. 航空动力,2018,2: 35-38. YAN Wuying. Analysis of the preresearch program for the new generation national military aviation power in the united states[J]. Journal of Aerospace Power,2018,2: 35-38. (in Chinese
YAN Wuying. Analysis of the preresearch program for the new generation national military aviation power in the united states[J]. Journal of Aerospace Power, 2018, 2: 35-38. (in Chinese)
|
| [4] |
曹建国. 航空发动机仿真技术研究现状、挑战和展望[J]. 推进技术,2018,39(5): 961-970. CAO Jianguo. Status,challenges and perspectives of aero-engine simulation technology[J]. Journal of Propulsion Technology,2018,39(5): 961-970. (in Chinese
CAO Jianguo. Status, challenges and perspectives of aero-engine simulation technology[J]. Journal of Propulsion Technology, 2018, 39(5): 961-970. (in Chinese)
|
| [5] |
HALL E,RASCHE J,HOYNIAK D. NPSS multidisciplinary integration and analysis: NASA/CR—2006-213890 [R]. Hanover: National Aeronautics and Space Administration,2006.
|
| [6] |
JEFFRYES W Chapman. Development and integration of a thermal management simulation for a quadrotor parallel hybrid propulsion system[C]// Proceedings of the 21st Propulsion and Energy 2021 Forum. Reno,Nevada,US: AIAA Propulsion and Energy Forum,2021: 1-19.
|
| [7] |
COCKSHUTT E P,SHARP C R. Gas turbine cycle calculations design point performance of turbo propeller and turboshaft engine[R]. Canada: National Research Council,1964.
|
| [8] |
MACMILLAN W L. Development of a modular type computer program for the calculation of gas turbine off design performance[D]. Cranfield: Cranfield institute of Technology,1973.
|
| [9] |
SELLERS J F,DANIELE C J. A program for calculating steady-state and transient performance of turbojet and turbofan engines[R]. Houston: National Aeronautics and Space Administration,1975.
|
| [10] |
ASHLEMAN R,LAVELLE T,PARSONS F. The national cycle program-a flexible system modeling architecture: AIAA-98-3114 [R]. Washington DC: American Institute of Aeronautics and Astronautics,1998.
|
| [11] |
ALEXIOU A,MATHIOUDAKIS K. Development of gas turbine performance models using a generic simulation tool[C]// Proceedings of the ASME Turbo Expo 2005: Power for Land,Sea,and Air. Reno,Nevada,US: American Society of Mechanical Engineers,2005: 185-194.
|
| [12] |
VISSER W P J. Gas turbine engine simulation at NLR [R]. Eindhoven,Netherlands: Dutch Aerospace Laboratory,1995.
|
| [13] |
KURZKE J. Advanced user-friendly gas turbine performance calculations on a personal computer[C]// Proceedings of the ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. Houston,Texas,US: American Society of Mechanical Engineers,2015: 145-158.
|
| [14] |
SLOTNICK J,KHODADOUST A,ALONSO J,et al. CFD vision 2030 study: a path to revolutionary computational aerosciences[J]. Mchenry County Natural Hazards Mitigation Plan,2014,39(6): 1676-1684.
|
| [15] |
DIWANJI S P,SURTI A,DE S. Development of 1D turbomachinery meanline solver with physics-based detailed loss models[C]//Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP). Beijing: Chinese Society of Theoretical and Applied Mechanics 2018: 211-216.
|
| [16] |
LAVELLE T M,KHANDELWAL S,OWEN A K. Intermediate fidelity closed brayton cycle power conversion model[J]. Lavelle Thomas M,2006,40(6): 213-219.
|
| [17] |
冯南平,向巧,沈荣骏,等. 航空发动机关键核心技术攻关的组织策略研究[J]. 中国工程科学,2022,24(4): 8. FEN Nanping,XIANG Qaio,SHEN Rongjun,et al. Organizational Strategy Research on Key Core Technologies for Aircraft Engines[J]. Journal of Chinese Engineering Science,2022,24(4): 8. (in Chinese
FEN Nanping, XIANG Qaio, SHEN Rongjun, et al. Organizational Strategy Research on Key Core Technologies for Aircraft Engines[J]. Journal of Chinese Engineering Science, 2022, 24(4): 8. (in Chinese)
|
| [18] |
NICHOLS L,CHAMIS C. Numerical propulsion system simulation-an interdisciplinary approach: AIAA 1991-3554 [R]. Reston,Virigina: American Institute of Aeronautics and Astronautics,1991.
|
| [19] |
ARJUN B. Poly-dimensional gas turbine sys-tem modelling and simulation[D]. London,UK: Cranfield University,2007.
|
| [20] |
周乐仪,岳明. 航空发动机数值仿真缩放算法研究[C]//中国航空学会第一届航空发动机数值仿真与数字化设计学术会议论文集. 北京: 中国航空学会,2008: 220-227. ZHOU Leyi,YUE Ming. Research on scaling algorithm for numerical simulation of aircraft engines[C]// Proceedings of the 1st Academic Conference on Numerical Simulation and Digital Design of Aircraft Engines by the Chinese Society of Aeronautics. Beijing: Chinese Society of Aeronautics and Astronautics,2008: 220-227. (in Chinese
ZHOU Leyi, YUE Ming. Research on scaling algorithm for numerical simulation of aircraft engines[C]// Proceedings of the 1st Academic Conference on Numerical Simulation and Digital Design of Aircraft Engines by the Chinese Society of Aeronautics. Beijing: Chinese Society of Aeronautics and Astronautics, 2008: 220-227. (in Chinese)
|
| [21] |
陈玉春,叶纬,高本兵. 涡扇发动机特性仿真中的Zooming技术研究[J]. 计算机仿真,2008,25(4): 13-15,29. CHEN Yuchun,YE Wei,GAO Benbing. Zooming technology for characteristics simulation of aero-engine[J]. Computer Simulation,2008,25(4): 13-15,29. (in Chinese doi: 10.3969/j.issn.1006-9348.2008.04.004
CHEN Yuchun, YE Wei, GAO Benbing. Zooming technology for characteristics simulation of aero-engine[J]. Computer Simulation, 2008, 25(4): 13-15, 29. (in Chinese) doi: 10.3969/j.issn.1006-9348.2008.04.004
|
| [22] |
王占学,宋甫,周莉,等. 航空发动机数值缩放技术的研究进展[J]. 推进技术,2018,39(7): 1441-1454. WANG Zhanxue,SONG Fu,ZHOU Li,et al. Research progress in numerical zooming technology of aero-engine[J]. Journal of Propulsion Technology,2018,39(7): 1441-1454. (in Chinese
WANG Zhanxue, SONG Fu, ZHOU Li, et al. Research progress in numerical zooming technology of aero-engine[J]. Journal of Propulsion Technology, 2018, 39(7): 1441-1454. (in Chinese)
|
| [23] |
LYTLE J K. The numerical propulsion system simulation: an overview: NASA TM-2000-209915[R]. Houston: National Aeronautics and Space Administration,2000.
|
| [24] |
CLAUS R W,EVANS A L,LYLTE J K,et al. Numerical propulsion system simulation[J]. Computing Systems in Engineering,1991,2(4): 357-364. doi: 10.1016/0956-0521(91)90003-N
|
| [25] |
EVANS A L. Numerical propulsion system simulation’s national cycle program[C]//Proceedings of the 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Cleveland,OH,US: The American Institute of Aeronautics and Astronautics,1998: 578-583.
|
| [26] |
SAMPATH R,PLYBON R,MEYERS C,et al. High fidelity system simulation of aerospace vehicles using NPSS[C]// Proceedings of the 42nd AIAA Aerospace Science Conference. Nevada: The American Institute of Aeronautics and Astronautics,2004: 1-11.
|
| [27] |
SAVILL M,LI Yi,AZAMI M H. Comparison of aircraft engine performance and emission analysis using alternative fuels[J]. International Journal of Sustainable Aviation,2017,3(1): 43-47. doi: 10.1504/IJSA.2017.085322
|
| [28] |
NANTUA N,PACHIDIS V,PILIDIS P. De-coupled approach to component zooming applied to a HBR turbofan engine intake[R]. London: Cranfield University,2004.
|
| [29] |
PACHIDIS V,PILIDIS P,GUINDEUIL G,et al. A partially integrated approach to component zooming using computational fluid dynamics[R]. Nevada: American Society of Mechanical Engineering,2005.
|
| [30] |
PACHIDIS V,PILIDIS P,TALHOUARN F,et al. A fully integrated approach to component zooming using computational fluid dynamics[J]. Journal of Engineering for Gas Turbines and Power,2006,128(3): 579-584. doi: 10.1115/1.2135815
|
| [31] |
BALA A,SETHI V,GATTO E L,et al. PROOSIS-a collaborative venture for gas turbine performance simulation using an object oriented programming schema[C]// Proceedings of the 18th ISABE Conference. Beijing,China: The International Society for Air Breathing Engines,2007: 210-216.
|
| [32] |
MUND F C, PILIDIS P. Performance simulation of a high-bypass turbofan with a 2D representation of the intake and fan components[J].Aeronautical Journal, 2016, 112(1137):673-682.
|
| [33] |
ALEXIOU A,BAALBERGEN E H,KOGENHOP O,et al. Advanced capabilities for gas turbine engine performance simulations[C]// Proceedings of the ASME Turbo Expo 2005: Power for Land,Sea,and Air. Washington DC: American Society of Mechanical Engineering,2007: 19-28.
|
| [34] |
ALEXIOU A,ARETAKIS N,ROUMELIOTIS I,et al. Performance modelling of an ultra-high bypass ratio geared turbofan[C]//Proceedings of the 23rd ISABE Conference. Manchester,UK: The International Society for Air Breathing Engines,2017: 3-8.
|
| [35] |
宋甫,周莉,王占学,等. 边界条件对变循环发动机多维度仿真模型的影响研究[J]. 推进技术,2022,43(9): 36-44. SONG Fu,ZHOU Li,WANG Zhanxue,et al. Effects of boundary conditions on multi-level variable cycle engine simulation model[J]. Journal of Propulsion Technology,2022,43(9): 36-44. (in Chinese
SONG Fu, ZHOU Li, WANG Zhanxue, et al. Effects of boundary conditions on multi-level variable cycle engine simulation model[J]. Journal of Propulsion Technology, 2022, 43(9): 36-44. (in Chinese)
|
| [36] |
PACHIDIS V A,PILIDIS P,ALEXANDER T,et al. Advanced performance simulation of a turbofan engine intake[J]. Journal of Propulsion and Power,2006,22(1): 201-205. doi: 10.2514/1.14244
|
| [37] |
CURNOCK B,YIN J,HALES R,et al. High-bypass turbofan model using a fan radial-profile performance map[J]. Aircraft Design,2001,4(2/3): 115-126.
|
| [38] |
PACHIDIS V,PILIDIS P,TEMPLALEXIS I,et al. Prediction of engine performance under compressor inlet flow distortion using streamline curvature[J]. Journal of Gas Turbines Power,2007,129(1): 97-103. doi: 10.1115/1.2363414
|
| [39] |
JOKSIMOVIC A,DUPLAA S,BOUSQUET Y,et al. Local and global analysis of a variable pitch fan turbofan engine[C]//12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics. London, UK: European Turbomachinery Society,2017: 211-217.
|
| [40] |
PILET J,LECORDIX J L,GARCIA-ROSA N,et al. Towards a fully coupled component zooming approach in engine performance simulation[C]//Volume 1: Aircraft Engine; Ceramics; Coal,Biomass and Alternative Fuels; Wind Turbine Technology. Washington DC: American Society of Mechanical Engineering,2011: 287-299.
|
| [41] |
TEMPLALEXIS I,ALEXIOU A,PACHIDIS V,et al. Direct coupling of a two-dimensional fan model in a turbofan engine performance simulation[C]// Proceedings of the ASME Turbo Expo 2016: Power for Land,Sea,and Air. Washington DC: American Society of Mechanical Engineering,2016: 47-53.
|
| [42] |
FOLLEN G,AUBUCHON M. Numerical zooming between a NPSS engine system simulation and a one-dimensional high compressor analysis code[R]. Washington DC: National Aeronautics and Space Administration,2000.
|
| [43] |
REITENBACH S,SCHNÖS M,BECKER R G,et al. Optimization of compressor variable geometry settings using multi-fidelity simulation[C]// Proceedings of the ASME Turbo Expo 2015: Power for Land,Sea,and Air. Washington DC: American Society of Mechanical Engineers,2015: 37-45.
|
| [44] |
叶纬. 混合维数航空发动机总体性能计算程序构架初步研究[D]. 西安: 西北工业大学,2007. YE Wei. Preliminary study on program framework of mixed-dimension aero-engine overall performance calculation[D]. Xi’an: Northwestern Polytechnical University,2007. (in Chinese
YE Wei. Preliminary study on program framework of mixed-dimension aero-engine overall performance calculation[D]. Xi’an: Northwestern Polytechnical University, 2007. (in Chinese)
|
| [45] |
TURNER M G,REED J A,RYDER R,et al. Multi-fidelity simulation of a turbofan engine with results zoomed into mini-maps for a zero-D cycle simulation[C]// Proceedings of the ASME Turbo Expo 2004: Power for Land,Sea,and Air. Vienna: American Society of Mechanical Engineers,2004: 20-27.
|
| [46] |
STEINKE R J. STGSTK: A computer code for predicting multistage axial flow compressor performance by a meanline stage stacking method[R]. Huston,US: National Aeronautics and Space Administration,1982.
|
| [47] |
彭慧兰. 基于0D/2D耦合计算下的涡桨发动机总体性能研究[D]. 南京: 南京航空航天大学,2018. PENG Huilan. Study on overall performance of turboprop engine based on 0D/2D coupling calculation[D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2018. (in Chinese
PENG Huilan. Study on overall performance of turboprop engine based on 0D/2D coupling calculation[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2018. (in Chinese)
|
| [48] |
李燕. 基于0D/2D耦合的涡扇发动机总体性能计算与分析[D]. 南京: 南京航空航天大学,2018. LI Yan. Calculation and analysis of overall performance of turbofan engine based on 0D/2D coupling[D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2018. (in Chinese
LI Yan. Calculation and analysis of overall performance of turbofan engine based on 0D/2D coupling[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2018. (in Chinese)
|
| [49] |
宋甫,周莉,王占学,等. 部件三维仿真模型与发动机循环参数分析的耦合方法研究[J]. 推进技术,2022,43(7): 80-87. SONG Fu,ZHOU Li,WANG Zhanxue,et al. Coupling method between three-dimensional component simulation model and aero-engine cycle parameter analysis[J]. Journal of Propulsion Technology,2022,43(7): 80-87. (in Chinese
SONG Fu, ZHOU Li, WANG Zhanxue, et al. Coupling method between three-dimensional component simulation model and aero-engine cycle parameter analysis[J]. Journal of Propulsion Technology, 2022, 43(7): 80-87. (in Chinese)
|
| [50] |
宋甫,周莉,王占学,等. 不同维度缩放方法在航空发动机总体仿真中的应用[J]. 推进技术,2020,41(5): 974-983. SONG Fu,ZHOU Li,WANG Zhanxue,et al. Application of different zooming strategies in aero-engine simulation[J]. Journal of Propulsion Technology,2020,41(5): 974-983. (in Chinese
SONG Fu, ZHOU Li, WANG Zhanxue, et al. Application of different zooming strategies in aero-engine simulation[J]. Journal of Propulsion Technology, 2020, 41(5): 974-983. (in Chinese)
|
| [51] |
许哲文,唐海龙,陈敏,等.基于混合维度仿真的自适应循环发动机引射喷管安装性能研究[J]. 推进技术,2023,44(9):2207083. XU Zhewen,TANG Hailong,CHEN Min,et al. Research on the installation performance of injector nozzle in adaptive cycle engine based on hybrid dimension simulation[J].Journal of Propulsion Technology,2023,44(9):2207083.(in Chinese
XU Zhewen, TANG Hailong, CHEN Min, et al. Research on the installation performance of injector nozzle in adaptive cycle engine based on hybrid dimension simulation[J].Journal of Propulsion Technology, 2023, 44（9）: 2207083.（in Chinese）
|
| [52] |
ROUMELIOTIS I,ALEXIOU A,ARETAKIS N,et al. Development and integration of rain ingestion effects in engine performance simulations[J]. Journal of Engineering for Gas Turbines and Power,2015,137(4): 041202. doi: 10.1115/1.4028545
|
| [53] |
KROUSE C,CONNOLLY B,GORDON E. Asynchronous communication pattern for reducing simulation time in engine performance models[C]// Proceedings of the ASME Turbo Expo 2022: Power for Land,Sea,and Air. Washington DC: American Society of Mechanical Engineers,2022: 130-137.
|
DownLoad:
