| Citation: | CHEN Qiang, ZHANG Sheng, FENG Yuchun, et al. Failure analysis of plain woven SiC/SiC perforated plate-metal pin connection structure considering delamination damage[J]. Journal of Aerospace Power, 2025, 40（5）：20230567 doi: 10.13224/j.cnki.jasp.20230567
|
To explore the application potential of ceramic matrix composite (CMC) mechanical connection structure in aero-engine, the failure mode and failure process of plain woven SiC/SiC perforated plate-metal pin connection structure under tension state were studied by combining test and numerical simulation. The deformation and failure process of the test specimens in real-time were observed through digital image correlation (DIC) technology. The main failure mode of the connected structure arising from the shear failure combined with delamination damage was revealed by test results. Based on the cohesive zone model (CZM), the failure load, failure mode and delamination damage of the plain woven SiC/SiC perforated plate were predicted by using the progressive damage analysis method (PDA). Good consistency between the numerical failure predictions and the test results was obtained, and the failure load prediction error was less than 10%, indicating the validity of the numerical model for the failure analysis of connection structure.
| [1] |
高希光,韩栋,宋迎东,等. 陶瓷基复合材料结构的动力学强度设计方法: 研究现状及展望[J]. 机械工程学报,2021,57(16): 235-247. GAO Xiguang,HAN Dong,SONG Yingdong,et al. Dynamic strength design methods of ceramic matrix composite structures: current status and future prospects[J]. Journal of Mechanical Engineering,2021,57(16): 235-247. (in Chinese doi: 10.3901/JME.2021.16.235
GAO Xiguang, HAN Dong, SONG Yingdong, et al. Dynamic strength design methods of ceramic matrix composite structures: current status and future prospects[J]. Journal of Mechanical Engineering, 2021, 57(16): 235-247. (in Chinese) doi: 10.3901/JME.2021.16.235
|
| [2] |
杜昆,陈麒好,孟宪龙,等. 陶瓷基复合材料在航空发动机热端部件应用及热分析研究进展[J]. 推进技术,2022,43(2): 113-131. DU Kun,CHEN Qihao,MENG Xianlong,et al. Advancement in application and thermal analysis of ceramic matrix composites in aeroengine hot components[J]. Journal of Propulsion Technology,2022,43(2): 113-131. (in Chinese
DU Kun, CHEN Qihao, MENG Xianlong, et al. Advancement in application and thermal analysis of ceramic matrix composites in aeroengine hot components[J]. Journal of Propulsion Technology, 2022, 43(2): 113-131. (in Chinese)
|
| [3] |
石多奇,王振宇,刘长奇,等. 典型涡扇发动机陶瓷基复合材料涡轮叶片概念设计[J]. 航空动力学报,2023,38(2): 431-444. SHI Duoqi,WANG Zhenyu,LIU Changqi,et al. Conceptual design of ceramic matrix composites turbine blade for typical turbofan engine[J]. Journal of Aerospace Power,2023,38(2): 431-444. (in Chinese
SHI Duoqi, WANG Zhenyu, LIU Changqi, et al. Conceptual design of ceramic matrix composites turbine blade for typical turbofan engine[J]. Journal of Aerospace Power, 2023, 38(2): 431-444. (in Chinese)
|
| [4] |
赵丽滨,徐吉峰. 先进复合材料连接结构分析方法[M]. 北京: 北京航空航天大学出版社,2015. ZHAO Libin,XU Jifeng. Analysis method of advanced composite connection structure[M]. Beijing: Beijing University of Aeronautics and Astronautics Press,2015. (in Chinese
ZHAO Libin, XU Jifeng. Analysis method of advanced composite connection structure[M]. Beijing: Beijing University of Aeronautics and Astronautics Press, 2015. (in Chinese)
|
| [5] |
GE Mingming,CHENG Xiaoquan,HUANG Wenjun,et al. Damage mode and load distribution of countersunk bolted composite joints[J]. Journal of Composite Materials,2021,55(13): 1717-1732. doi: 10.1177/0021998320976782
|
| [6] |
ZHAO Libin,YANG Wen,CAO Tiancheng,et al. A progressive failure analysis of all-C/SiC composite multi-bolt joints[J]. Composite Structures,2018,202: 1059-1068. doi: 10.1016/j.compstruct.2018.05.029
|
| [7] |
ZHANG Yi,ZHANG Litong,HE Jiangyi,et al. Modelling shear behaviors of 2D C/SiC z-pinned joint prepared by chemical vapor infiltration[J]. Ceramics International,2018,44(6): 6433-6442. doi: 10.1016/j.ceramint.2018.01.038
|
| [8] |
杜翔宇,高希光,宋迎东. 2.5D C/SiC复合材料带孔板拉伸破坏的多尺度模拟[J]. 推进技术,2020,41(2): 439-446. DU Xiangyu,GAO Xiguang,SONG Yingdong. Multiscale simulation on tensile failure analysis of 2.5D C/SiC composite orifice plate[J]. Journal of Propulsion Technology,2020,41(2): 439-446. (in Chinese
DU Xiangyu, GAO Xiguang, SONG Yingdong. Multiscale simulation on tensile failure analysis of 2.5D C/SiC composite orifice plate[J]. Journal of Propulsion Technology, 2020, 41(2): 439-446. (in Chinese)
|
| [9] |
FU Maoqing,FANG Guodong,LIU Shuo,et al. Failure analysis of 2D C/SiC composite z-pinned/bonded hybrid single-lap joints[J]. Ceramics International,2020,46(13): 21216-21224. doi: 10.1016/j.ceramint.2020.05.204
|
| [10] |
YU Guoqiang,NI Zheng,SHI Jian,et al. Shear failure evolution and its dispersion of plain woven ceramic matrix composites z-pin structure[J]. International Journal of Applied Ceramic Technology,2022,19(6): 3288-3299. doi: 10.1111/ijac.14161
|
| [11] |
LI Xuqin,CHEN Xu,CHEN Jingyi,et al. Bearing behaviors and failure mechanisms of 2D C/SiC plate with an open hole[J]. Ceramics International,2021,47(1): 1407-1413. doi: 10.1016/j.ceramint.2020.08.264
|
| [12] |
赵丽滨,龚愉,张建宇. 纤维增强复合材料层合板分层扩展行为研究进展[J]. 航空学报,2019,40(1): 522509. ZHAO Libin,GONG Yu,ZHANG Jianyu. A survey on delamination growth behavior in fiber reinforced composite laminates[J]. Acta Aeronautica et Astronautica Sinica,2019,40(1): 522509. (in Chinese
ZHAO Libin, GONG Yu, ZHANG Jianyu. A survey on delamination growth behavior in fiber reinforced composite laminates[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(1): 522509. (in Chinese)
|
| [13] |
董大龙,周翔,汪海,等. 分层对复合材料机械连接结构承载能力的影响[J]. 复合材料学报,2018,35(1): 61-69. DONG Dalong,ZHOU Xiang,WANG Hai,et al. Bearing capacity of composite mechanical joint with hole delamination[J]. Acta Materiae Compositae Sinica,2018,35(1): 61-69. (in Chinese
DONG Dalong, ZHOU Xiang, WANG Hai, et al. Bearing capacity of composite mechanical joint with hole delamination[J]. Acta Materiae Compositae Sinica, 2018, 35(1): 61-69. (in Chinese)
|
| [14] |
冯雨春,张盛,高希光. 考虑分层损伤的平纹编织SiC/SiC弯曲失效模拟[J]. 推进技术,2023,44(4): 22010053. FENG Yuchun,ZHANG Sheng,GAO Xiguang. Flexural failure simulation of plain woven SiC/SiC considering delamination damage[J]. Journal of Propulsion Technology,2023,44(4): 22010053. (in Chinese
FENG Yuchun, ZHANG Sheng, GAO Xiguang. Flexural failure simulation of plain woven SiC/SiC considering delamination damage[J]. Journal of Propulsion Technology, 2023, 44(4): 22010053. (in Chinese)
|
| [15] |
胡殿印,曾雨琪,张龙,等. 二维编织SiC/SiC陶瓷基复合材料宏观弹性常数预测及模态试验研究[J]. 推进技术,2018,39(2): 465-472. HU Dianyin,ZENG Yuqi,ZHANG Long,et al. Effective elastic constants prediction and modal test of 2D braided SiC/SiC ceramic matrix composites[J]. Journal of Propulsion Technology,2018,39(2): 465-472. (in Chinese
HU Dianyin, ZENG Yuqi, ZHANG Long, et al. Effective elastic constants prediction and modal test of 2D braided SiC/SiC ceramic matrix composites[J]. Journal of Propulsion Technology, 2018, 39(2): 465-472. (in Chinese)
|
| [16] |
LI Bo,HOO FATT M S. Impact damage and residual strength predictions of 2D woven SiC/SiC composites[J]. Finite Elements in Analysis and Design,2016,113: 30-42. doi: 10.1016/j.finel.2016.01.001
|
| [17] |
《中国航空材料手册》编辑委员会. 中国航空材料手册: 第2卷[M]. 北京: 中国标准出版社,2001: 365.
|
| [18] |
SCHREIER H,ORTEU J J,SUTTON M A. Image correlation for shape,motion and deformation measurements: basic concepts,theory and applications[M]. Boston,MA,US: Springer,2009.
|
| [19] |
GARNICH M R,AKULA V M K. Review of degradation models for progressive failure analysis of fiber reinforced polymer composites[J]. Applied Mechanics Reviews,2009,62(1): 010801.
|
| [20] |
LIU P F,ZHENG J Y. Recent developments on damage modeling and finite element analysis for composite laminates: a review[J]. Materials & Design,2010,31(8): 3825-3834.
|
| [21] |
FANG Guodong,LIANG Jun. A review of numerical modeling of three-dimensional braided textile composites[J]. Journal of Composite Materials,2011,45(23): 2415-2436. doi: 10.1177/0021998311401093
|
| [22] |
TSERPES K I,LABEAS G,PAPANIKOS P,et al. Strength prediction of bolted joints in graphite/epoxy composite laminates[J]. Composites Part B: Engineering,2002,33(7): 521-529. doi: 10.1016/S1359-8368(02)00033-1
|
| [23] |
卢子兴. 复合材料界面的内聚力模型及其应用[J]. 固体力学学报,2015,36(增刊1): 85-94. LU Zixing. Cohesion model of composite interface and its application[J]. Chinese Journal of Solid Mechanics,2015,36(Suppl.1): 85-94. (in Chinese
LU Zixing. Cohesion model of composite interface and its application[J]. Chinese Journal of Solid Mechanics, 2015, 36(Suppl.1): 85-94. (in Chinese)
|
| [24] |
李西宁,王悦舜,周新房. 复合材料层合板分层损伤数值模拟方法研究现状[J]. 复合材料学报,2021,38(4): 1076-1086. LI Xining,WANG Yueshun,ZHOU Xinfang. Status of numerical simulation methods for delamination damage of composite laminates[J]. Acta Materiae Compositae Sinica,2021,38(4): 1076-1086. (in Chinese
LI Xining, WANG Yueshun, ZHOU Xinfang. Status of numerical simulation methods for delamination damage of composite laminates[J]. Acta Materiae Compositae Sinica, 2021, 38(4): 1076-1086. (in Chinese)
|
| [25] |
REEDER J. An evaluation of mixed-mode delamination failure criteria[R]. NASA-TM-104210,1992.
|
| [26] |
CHOI S R,BANSAL N. Interlaminar tension/shear properties and stress rupture in shear of various continuous fiber-reinforced ceramic matrix composites[J]. Ceramic Transactions,2012,175: 117-134.
|
| [27] |
OJARD G,MILLER R,BARNETT T,et al. Mode I interlaminar fracture toughness testing of a ceramic matrix composite (PREPRINT) [R]. Daytona Beach,US: 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC),2010.
|
| [28] |
KUMAR R S,WELSH G S. Delamination failure in ceramic matrix composites: numerical predictions and experiments[J]. Acta Materialia,2012,60(6/7): 2886-2900.
|
| [29] |
周龙伟,赵丽滨. 基于失效机制的单向纤维增强树脂复合材料退化模型[J]. 复合材料学报,2019,36(6): 1389-1397. ZHOU Longwei,ZHAO Libin. Failure mechanisms based degradation model of unidirectional fiber reinforced polymer composites[J]. Acta Materiae Compositae Sinica,2019,36(6): 1389-1397. (in Chinese
ZHOU Longwei, ZHAO Libin. Failure mechanisms based degradation model of unidirectional fiber reinforced polymer composites[J]. Acta Materiae Compositae Sinica, 2019, 36(6): 1389-1397. (in Chinese)
|
| [30] |
陈正扬. 平纹编织SiC/SiC火焰筒设计与性能计算[D]. 南京: 南京航空航天大学,2021. CHEN Zhengyang. Design of plain weave SiC/SiC flame tube and calculation of performance[D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2021. (in Chinese
CHEN Zhengyang. Design of plain weave SiC/SiC flame tube and calculation of performance[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2021. (in Chinese)
|
DownLoad:
