| Citation: | JIA Xiang. Reliability evaluation for product based on similar lifetime model and data from similar products[J]. Journal of Aerospace Power, 2025, 40（5）：20230571 doi: 10.13224/j.cnki.jasp.20230571
|
To use the data from the similar products of the new product considering data enrichment, a model based on similar lifetime model was proposed for reliability evaluation. The similar factor was defined to represent the relationship between similar and new products. The similar lifetime model was presented to describe the relationship between similar factor and corresponding lifetime distribution parameters. Next, the data from similar products were used to determine the similar lifetime model, and the reliability could be evaluated further. An example was illustrated for a product in satellite to show the application of methods. The proposed method was demonstrated applicable no matter whether there were data from new product and whether there were failure data, meanwhile it eliminated the demand for collection of new products by existing methods, making it appealing with simple calculation, strong flexibility and wide application.
| [1] |
王宁晨,胡殿印,刘茜,等. 基于Wiener过程的涡轮盘榫槽裂纹扩展可靠性分析[J]. 航空动力学报,2022,37(11): 2440-2447. WANG Ningchen,HU Dianyin,LIU Xi,et al. Reliability analysis of crack growth in turbine disk mortise based on Wiener process[J]. Journal of Aerospace Power,2022,37(11): 2440-2447. (in Chinese
WANG Ningchen, HU Dianyin, LIU Xi, et al. Reliability analysis of crack growth in turbine disk mortise based on Wiener process[J]. Journal of Aerospace Power, 2022, 37(11): 2440-2447. (in Chinese)
|
| [2] |
刘璐,邱明,李军星,等. 基于LTSA融合降维法的滚动轴承可靠性评估方法[J]. 航空动力学报,2021,36(2): 413-420. LIU Lu,QIU Ming,LI Junxing,et al. Rolling bearing reliability evaluation method based on LTSA fusion dimensionality reduction method[J]. Journal of Aerospace Power,2021,36(2): 413-420. (in Chinese
LIU Lu, QIU Ming, LI Junxing, et al. Rolling bearing reliability evaluation method based on LTSA fusion dimensionality reduction method[J]. Journal of Aerospace Power, 2021, 36(2): 413-420. (in Chinese)
|
| [3] |
刘士杰,刘登丰,马晓秋,等. 重复使用液体火箭发动机涡轮泵安全寿命预估方法[J]. 航空动力学报,2022,37(5): 1079-1089. LIU Shijie,LIU Dengfeng,MA Xiaoqiu,et al. Predicting method of safety life of reusable liquid rocket engine turbopump[J]. Journal of Aerospace Power,2022,37(5): 1079-1089. (in Chinese
LIU Shijie, LIU Dengfeng, MA Xiaoqiu, et al. Predicting method of safety life of reusable liquid rocket engine turbopump[J]. Journal of Aerospace Power, 2022, 37(5): 1079-1089. (in Chinese)
|
| [4] |
王瑞祥,许凌天,陈晓阳,等. 小样本无失效寿命试验数据的轴承可靠性评估[J]. 航空动力学报,2021,36(11): 2400-2409. WANG Ruixiang,XU Lingtian,CHEN Xiaoyang,et al. Reliability evaluation of bearings based on small samples and zero-failure life test data[J]. Journal of Aerospace Power,2021,36(11): 2400-2409. (in Chinese
WANG Ruixiang, XU Lingtian, CHEN Xiaoyang, et al. Reliability evaluation of bearings based on small samples and zero-failure life test data[J]. Journal of Aerospace Power, 2021, 36(11): 2400-2409. (in Chinese)
|
| [5] |
柯贤朝. 基于相似产品法的某发射箱端盖可靠性预计[J]. 环境技术,2022,40(4): 35-37. KE Xianchao. Reliability predictions of a canister cover based on similar product method[J]. Environmental Technology,2022,40(4): 35-37. (in Chinese
KE Xianchao. Reliability predictions of a canister cover based on similar product method[J]. Environmental Technology, 2022, 40(4): 35-37. (in Chinese)
|
| [6] |
毛松. 相似产品步进应力加速寿命试验的统计分析[J]. 系统工程理论与实践,2017,37(6): 1630-1637. MAO Song. Statistical inference for step stress model with relative items[J]. Systems Engineering-Theory & Practice,2017,37(6): 1630-1637. (in Chinese
MAO Song. Statistical inference for step stress model with relative items[J]. Systems Engineering-Theory & Practice, 2017, 37(6): 1630-1637. (in Chinese)
|
| [7] |
SANCHEZ L M,PAN Rong. An enhanced parenting process: predicting reliability in product’s design phase[J]. Quality Engineering,2011,23(4): 378-387. doi: 10.1080/08982112.2011.603110
|
| [8] |
焦柯,吴桂广,赖鸿立,等. 基于相似度法的混凝土结构建筑群安全评估方法[J]. 建筑技术,2022,53(1): 111-115. JIAO Ke,WU Guiguang,LAI Hongli,et al. Similarity method-based safety assessment method for concrete structure building cluster[J]. Architecture Technology,2022,53(1): 111-115. (in Chinese
JIAO Ke, WU Guiguang, LAI Hongli, et al. Similarity method-based safety assessment method for concrete structure building cluster[J]. Architecture Technology, 2022, 53(1): 111-115. (in Chinese)
|
| [9] |
LIU Yingchao,HU Xiaofeng,ZHANG Wenjuan. Remaining useful life prediction based on health index similarity[J]. Reliability Engineering & System Safety,2019,185: 502-510.
|
| [10] |
梁泽明,姜洪权,周秉直,等. 多参数相似性信息融合的剩余寿命预测[J]. 计算机集成制造系统,2018,24(4): 813-819. LIANG Zeming,JIANG Hongquan,ZHOU Bingzhi,et al. Multi-variable similarity-based information fusion method for remaining useful life prediction[J]. Computer Integrated Manufacturing Systems,2018,24(4): 813-819. (in Chinese
LIANG Zeming, JIANG Hongquan, ZHOU Bingzhi, et al. Multi-variable similarity-based information fusion method for remaining useful life prediction[J]. Computer Integrated Manufacturing Systems, 2018, 24(4): 813-819. (in Chinese)
|
| [11] |
李永涛,何亚磊,巫风玲. 基于结构相似性算法的微光夜视仪可靠性试验故障诊断[J]. 红外技术,2021,43(9): 889-894. LI Yongtao,HE Yalei,WU Fengling. Fault diagnosis of reliability test for low-light-level vision device based on structural similarity algorithm[J]. Infrared Technology,2021,43(9): 889-894. (in Chinese
LI Yongtao, HE Yalei, WU Fengling. Fault diagnosis of reliability test for low-light-level vision device based on structural similarity algorithm[J]. Infrared Technology, 2021, 43(9): 889-894. (in Chinese)
|
| [12] |
董学平,邹龙春,章恒,等. 贫信息背景下复杂装备的加速系数确定模型: 基于灰色关联与失效相似度[J]. 装备环境工程,2021,18(10): 98-103. DONG Xueping,ZOU Longchun,ZHANG Heng,et al. Determination of acceleration coefficient of complex equipment under information shortage:based on grey correlation and failure similarity[J]. Equipment Environmental Engineering,2021,18(10): 98-103. (in Chinese
DONG Xueping, ZOU Longchun, ZHANG Heng, et al. Determination of acceleration coefficient of complex equipment under information shortage: based on grey correlation and failure similarity[J]. Equipment Environmental Engineering, 2021, 18(10): 98-103. (in Chinese)
|
| [13] |
芮菡萏. 灰信息背景下的复杂装备可靠性增长AMSAA模型研究[D]. 南京: 南京航空航天大学,2016. RUI Handan. Research on reliability growth AMSAA model of complex equipment based on grey information[D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2016. (in Chinese
RUI Handan. Research on reliability growth AMSAA model of complex equipment based on grey information[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2016. (in Chinese)
|
| [14] |
金晟,陈捷,谷然. 风力发电机主轴轴承等效寿命模型相似准则研究[J]. 制造技术与机床,2021(7): 146-152. JIN Sheng,CHEN Jie,GU Ran. Study on similarity criterion of equivalent life model of wind turbine main shaft bearing[J]. Manufacturing Technology & Machine Tool,2021(7): 146-152. (in Chinese
JIN Sheng, CHEN Jie, GU Ran. Study on similarity criterion of equivalent life model of wind turbine main shaft bearing[J]. Manufacturing Technology & Machine Tool, 2021(7): 146-152. (in Chinese)
|
| [15] |
FANG Shiyu,LI Longjie,HU Binyan,et al. Evidential link prediction by exploiting the applicability of similarity indexes to nodes[J]. Expert Systems with Applications,2022,210: 118397. doi: 10.1016/j.eswa.2022.118397
|
| [16] |
LIU Yu,HUANG Hongzhong,LING Dan. Reliability prediction for evolutionary product in the conceptual design phase using neural network-based fuzzy synthetic assessment[J]. International Journal of Systems Science,2013,44(3): 545-555. doi: 10.1080/00207721.2011.617887
|
| [17] |
杨军,申丽娟,黄金,等. 利用相似产品信息的电子产品可靠性Bayes综合评估[J]. 航空学报,2008,29(6): 1550-1553. YANG Jun,SHEN Lijuan,HUANG Jin,et al. Bayes comprehensive assessment of reliability for electronic products by using test information of similar products[J]. Acta Aeronautica et Astronautica Sinica,2008,29(6): 1550-1553. (in Chinese
YANG Jun, SHEN Lijuan, HUANG Jin, et al. Bayes comprehensive assessment of reliability for electronic products by using test information of similar products[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(6): 1550-1553. (in Chinese)
|
| [18] |
王旗. 基于相似机床信息的CXK5463的可靠性评估[D]. 河北 秦皇岛: 燕山大学,2015. WANG Qi. Reliability evaluation of CXK5463 based on multiple similar samples[D]. Qinhuangdao Hebei: Yanshan University,2015. (in Chinese
WANG Qi. Reliability evaluation of CXK5463 based on multiple similar samples[D]. Qinhuangdao Hebei: Yanshan University, 2015. (in Chinese)
|
| [19] |
温洋. 某航天火工装置可靠性分析与评估方法研究[D]. 北京: 北京理工大学,2015. WEN Yang. Study on the reliability analysis and assessment method of the aerospace pyrotechnic devices[D]. Beijing: Beijing Institute of Technology,2015. (in Chinese
WEN Yang. Study on the reliability analysis and assessment method of the aerospace pyrotechnic devices[D]. Beijing: Beijing Institute of Technology, 2015. (in Chinese)
|
| [20] |
LI Ling,NG H K T,ALGARNI A H,et al. A model-ranking approach for estimation based on accelerated degradation test data[J]. IEEE Transactions on Reliability,2020,69(2): 484-496. doi: 10.1109/TR.2020.2976786
|
| [21] |
谭跃进. 系统工程原理[M]. 2版. 北京: 科学出版社,2017. TAN Yuejin. Principles of system engineering[M]. 2nd. ed. Beijing: Science Press,2017. (in Chinese
TAN Yuejin. Principles of system engineering[M]. 2nd. ed. Beijing: Science Press, 2017. (in Chinese)
|
| [22] |
贾祥. 韦布尔分布及其可靠性统计方法[M]. 北京: 科学出版社,2021. JIA Xiang. Weibull distribution[M]. Beijing: Science Press,2021. (in Chinese
JIA Xiang. Weibull distribution[M]. Beijing: Science Press, 2021. (in Chinese)
|
| [23] |
贾祥,程志君,郭波. 基于信息熵和Bayes理论的高可靠性产品可靠性评估[J]. 系统工程理论与实践,2020,40(7): 1918-1926. JIA Xiang,CHENG Zhijun,GUO Bo. Reliability evaluation for products based on entropy and Bayes theory[J]. Systems Engineering-Theory & Practice,2020,40(7): 1918-1926. (in Chinese doi: 10.12011/1000-6788-2019-1306-09
JIA Xiang, CHENG Zhijun, GUO Bo. Reliability evaluation for products based on entropy and Bayes theory[J]. Systems Engineering-Theory & Practice, 2020, 40(7): 1918-1926. (in Chinese) doi: 10.12011/1000-6788-2019-1306-09
|
| [24] |
甘应爱,田丰,李维铮,等. 运筹学[M]. 3版. 北京: 清华大学出版社,2005. GAN Ying’ai,TIAN Feng, LI Weizheng,et al. Operational research[M]. 3rd. Beijing: Tsinghua University Press,2005. (in Chinese
GAN Ying’ai, TIAN Feng, LI Weizheng, et al. Operational research[M]. 3rd. Beijing: Tsinghua University Press, 2005. (in Chinese)
|
| [25] |
贾祥,郭波. 融合专家经验和寿命试验数据的产品可靠性评估[J]. 控制与决策,2022,37(10): 2600-2608. JIA Xiang,GUO Bo. Reliability evaluation for products by fusing expert knowledge and lifetime data[J]. Control and Decision,2022,37(10): 2600-2608. (in Chinese
JIA Xiang, GUO Bo. Reliability evaluation for products by fusing expert knowledge and lifetime data[J]. Control and Decision, 2022, 37(10): 2600-2608. (in Chinese)
|
DownLoad:
