| Citation: | YOU Ruquan, QUAN Sheng, CHEN Wenbin, et al. Effects of film hole diameter variations on overall cooling performance of a rotating turbine blade[J]. Journal of Aerospace Power, 2025, 40（8）：20240533 doi: 10.13224/j.cnki.jasp.20240533
|
In view of the problem that the film hole diameters are different from their design values caused by laser drilling and coating spraying during the manufacturing, the effects of film hole diameter change on the cooling effectiveness in different regions of the blade were analyzed for a rotating turbine blade. According to the statistics from a real engine, the diameter of the film hole was larger after laser processing but smaller after coating spraying relative to the design value. Based on this, different models were established and conjugate heat transfer simulations were carried out. The results showed that the change of film hole diameter had a more significant effect on the cooling effectiveness in the region with strong external heat transfer boundaries. The comprehensive cooling efficiency near the trailing edge region was the best when the film hole diameter reached the design value, and the efficiency was positively correlated with the film hole diameter in the other positions. The increase of the film hole diameter significantly improved the comprehensive cooling efficiency by 164.13%/mm, which was far more than 78.72%/mm when the film hole diameter decreased. The change of film hole diameter had a great influence on the cooling efficiency of the leading edge, and the average influence degree can be up to 254.62%/mm, which need to be paid more attention in the design.
| [1] |
张凯荣, 徐毅, 刘梅军, 等. 热障涂层服役温度测试与隔热机理[J]. 材料保护, 2024, 57(3): 38-49. ZHANG Kairong, XU Yi, LIU Meijun, et al. Service temperature measurement and thermal insulation mechanism of thermal barrier coatings[J]. Materials Protection, 2024, 57(3): 38-49. (in Chinese
ZHANG Kairong, XU Yi, LIU Meijun, et al. Service temperature measurement and thermal insulation mechanism of thermal barrier coatings[J]. Materials Protection, 2024, 57(3): 38-49. (in Chinese)
|
| [2] |
朱之丽, 陈敏, 唐海龙, 等. 航空燃气涡轮发动机工作原理及性能[M]. 上海: 上海交通大学出版社, 2014.
|
| [3] |
林宏镇, 汪火光, 蒋章焰. 高性能航空发动机传热技术[M]. 北京: 国防工业出版社, 2005.
|
| [4] |
朱海南, 齐歆霞. 涡轮叶片气膜孔加工技术及其发展[J]. 航空制造技术, 2011, 54(13): 71-74. ZHU Hainan, QI Xinxia. Development of machining technology gas holes on turbine blades[J]. Aeronautical Manufacturing Technology, 2011, 54(13): 71-74. (in Chinese doi: 10.3969/j.issn.1671-833X.2011.13.013
ZHU Hainan, QI Xinxia. Development of machining technology gas holes on turbine blades[J]. Aeronautical Manufacturing Technology, 2011, 54(13): 71-74. (in Chinese) doi: 10.3969/j.issn.1671-833X.2011.13.013
|
| [5] |
王海, 范芳苏, 浦健, 等. 带凹坑圆孔气膜冷却流动传热特性[J]. 航空动力学报, 2022, 37(3): 492-501. WANG Hai, FAN Fangsu, PU Jian, et al. Flow and heat transfer characteristics of round-hole film cooling with crater[J]. Journal of Aerospace Power, 2022, 37(3): 492-501. (in Chinese
WANG Hai, FAN Fangsu, PU Jian, et al. Flow and heat transfer characteristics of round-hole film cooling with crater[J]. Journal of Aerospace Power, 2022, 37(3): 492-501. (in Chinese)
|
| [6] |
李广超, 刘野, 郭云修, 等. 气膜孔堵塞对叶片吸力面换热性能影响[J]. 热能动力工程, 2021, 36(11): 41-46, 56. LI Guangchao, LIU Ye, GUO Yunxiu, et al. Influence of blockage inside film cooling hole on heat transfer performance of vane suction surface[J]. Journal of Engineering for Thermal Energy and Power, 2021, 36(11): 41-46, 56. (in Chinese
LI Guangchao, LIU Ye, GUO Yunxiu, et al. Influence of blockage inside film cooling hole on heat transfer performance of vane suction surface[J]. Journal of Engineering for Thermal Energy and Power, 2021, 36(11): 41-46, 56. (in Chinese)
|
| [7] |
杨晓军, 许诺然, 刘智刚. 污染物沉积和热障涂层脱落对气膜冷却效率影响的数值研究[J]. 推进技术, 2013, 34(10): 1362-1368. YANG Xiaojun, XU Nuoran, LIU Zhigang. Effects of deposition and thermal barrier coating spallation on film cooling effectiveness: a numerical study[J]. Journal of Propulsion Technology, 2013, 34(10): 1362-1368. (in Chinese
YANG Xiaojun, XU Nuoran, LIU Zhigang. Effects of deposition and thermal barrier coating spallation on film cooling effectiveness: a numerical study[J]. Journal of Propulsion Technology, 2013, 34(10): 1362-1368. (in Chinese)
|
| [8] |
BUNKER R S. Effect of partial coating blockage on film cooling effectiveness[R]. Virtual: ASME Turbo Expo 2000: Power for Land, Sea, and Air, 2000.
|
| [9] |
WHITFIELD C A, SCHROEDER R P, THOLE K A, et al. Blockage effects from simulated thermal barrier coatings for cylindrical and shaped cooling holes[R]. Dusseldorf, Germany: ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 2014.
|
| [10] |
OGIRIKI E A, LI Y G, NIKOLAIDIS T, et al. Effect of fouling, thermal barrier coating degradation and film cooling holes blockage on gas turbine engine creep life[J]. Procedia CIRP, 2015, 38: 228-233. doi: 10.1016/j.procir.2015.07.017
|
| [11] |
LEE Sanga, HWANG W, YEE K. Robust design optimization of a turbine blade film cooling hole affected by roughness and blockage[J]. International Journal of Thermal Sciences, 2018, 133: 216-229. doi: 10.1016/j.ijthermalsci.2018.07.012
|
| [12] |
康军卫, 程玉贤. 航空发动机涡轮叶片缩孔问题及控制研究[J]. 沈阳航空航天大学学报, 2018, 35(4): 60-66. KANG Junwei, CHENG Yuxian. Diameter shrinkage of aero-engine gas turbine blades and its control[J]. Journal of Shenyang Aerospace University, 2018, 35(4): 60-66. (in Chinese doi: 10.3969/j.issn.2095-1248.2018.04.006
KANG Junwei, CHENG Yuxian. Diameter shrinkage of aero-engine gas turbine blades and its control[J]. Journal of Shenyang Aerospace University, 2018, 35(4): 60-66. (in Chinese) doi: 10.3969/j.issn.2095-1248.2018.04.006
|
| [13] |
BOGARD D G, SCHMIDT D L, TABBITA M. Characterization and laboratory simulation of turbine airfoil surface roughness and associated heat transfer[J]. Journal of Turbomachinery, 1998, 120(2): 337-342. doi: 10.1115/1.2841411
|
| [14] |
SUNDARAM N, THOLE K A. Effects of surface deposition, hole blockage, and thermal barrier coating spallation on vane endwall film cooling[J]. Journal of Turbomachinery, 2007, 129(3): 599-607. doi: 10.1115/1.2720485
|
| [15] |
WALSH W S, THOLE K A, JOE C. Effects of sand ingestion on the blockage of film-cooling holes[R]. Barcelona, Spain: ASME Turbo Expo 2006: Power for Land, Sea, and Air, 2006.
|
| [16] |
HUANG Ke’nan, ZHANG Jingzhou, TAN Xiaoming, et al. Experimental study on film cooling performance of imperfect holes[J]. Chinese Journal of Aeronautics, 2018, 31(6): 1215-1221. doi: 10.1016/j.cja.2018.04.001
|
| [17] |
TIAN Ke, WANG Jin, LIU Chao, et al. Effect of blockage configuration on film cooling with and without mist injection[J]. Energy, 2018, 153: 661-670. doi: 10.1016/j.energy.2018.04.050
|
| [18] |
JOVANOVIĆ M B, DE LANGE H C, VAN STEENHOVEN A A. Influence of hole imperfection on jet cross flow interaction[J]. International Journal of Heat and Fluid Flow, 2006, 27(1): 42-53. doi: 10.1016/j.ijheatfluidflow.2005.06.003
|
| [19] |
JOVANOVIĆ M B, DE LANGE H C, VAN STEENHOVEN A A. Effect of hole imperfection on adiabatic film cooling effectiveness[J]. International Journal of Heat and Fluid Flow, 2008, 29(2): 377-386. doi: 10.1016/j.ijheatfluidflow.2007.11.008
|
| [20] |
MENTER F. Zonal two equation k-ω turbulence models for aerodynamic flows[R]. AIAA1993-2906, 1993.
|
| [21] |
MENTER F, SCHUTZE J, KURBATSKII K, et al. Scale-resolving simulation techniques in industrial CFD[R]. AIAA2011-3474, 2011.
|
| [22] |
DU Zequn, LI Haiwang, YOU Ruquan, et al. Effects of thermal barrier coating thickness and surface roughness on cooling performance sensitivity of a turbine blade[J]. Case Studies in Thermal Engineering, 2023, 52: 103727. doi: 10.1016/j.csite.2023.103727
|
DownLoad:
