Volume 40 Issue 12
Dec.  2025
Turn off MathJax
Article Contents
DU Hao, WANG Rongqiao, ZHAO Yan, et al. Multi-scale full-field strain measurement method based on digital image correlation method[J]. Journal of Aerospace Power, 2025, 40(12):20240735 doi: 10.13224/j.cnki.jasp.20240735
Citation: DU Hao, WANG Rongqiao, ZHAO Yan, et al. Multi-scale full-field strain measurement method based on digital image correlation method[J]. Journal of Aerospace Power, 2025, 40(12):20240735 doi: 10.13224/j.cnki.jasp.20240735

Multi-scale full-field strain measurement method based on digital image correlation method

doi: 10.13224/j.cnki.jasp.20240735
  • Received Date: 2024-10-27
    Available Online: 2025-01-07
  • To realize strain measurement accuracy at different scales, a multi-scale full-field strain measurement method based on digital image correlation (DIC) was proposed. A multilayer speckle preparation method was developed, and the quality of speckle was verified by numerical simulation test. The out-of-plane displacement was quantified by wedge plane model, and a false strain correction method based on lens imaging model was proposed. The calculation methods of out-of-plane displacement and the method of false strain correction were verified by relevant experiments. The results indicated that the average error of the surface displacement calculation method was less than 4.20%; compared with the traditional DIC method, the accuracy of strain measurement by using the false strain correction algorithm was improved by more than 8.16%, achieving high-precision measurement of multiscale full-field strain.

     

  • loading
  • [1]
    齐哲, 郎旭东, 赵春玲, 等. SiC/SiC复合材料失效行为研究进展[J]. 航空材料学报, 2021, 41(3): 25-35. QI Zhe, LANG Xudong, ZHAO Chunling, et al. Research progress on failure behavior of SiC/SiC composites [J]. Journal of Aeronautical Materials, 201, 41(3): 25-35. (in Chinese

    QI Zhe, LANG Xudong, ZHAO Chunling, et al. Research progress on failure behavior of SiC/SiC composites [J]. Journal of Aeronautical Materials, 201, 41(3): 25-35. (in Chinese)
    [2]
    CARROLL J D, ABUZAID W Z, LAMBROS J, et al. On the interactions between strain accumulation, microstructure, and fatigue crack behavior[J]. International Journal of Fracture, 2013, 180(2): 223-241. doi: 10.1007/s10704-013-9813-8
    [3]
    DONG Yali, ZHAO Jiaqing, PAN B. Ultraviolet 3D digital image correlation applied for deformation measurement in thermal testing with infrared quartz lamps[J]. Chinese Journal of Aeronautics, 2020, 33: 1085-1092. doi: 10.1016/j.cja.2019.03.038
    [4]
    PETERS W H, RANSON W F. Digital imaging techniques in experimental stress analysis[J]. Optical Engineering, 1982, 21(3): 213427.
    [5]
    YAMAGUCHI I. Speckle displacement and decorrelation in the diffraction and image fields for small object deformation[J]. Optica Acta, 1981, 28(10): 1359-1376. doi: 10.1080/713820454
    [6]
    HALDAR S, GHEEWALA N, GRANDE-ALLEN K J, et al. Multi-scale Mechanical Characterization of Palmetto Wood using Digital Image Correlation to Develop a Template for Biologically-Inspired Polymer Composites[J]. Experimental Mechanics, 2011, 51(4): 575-589. doi: 10.1007/s11340-010-9422-7
    [7]
    MAZZOLENI P, ZAPPA E, MATTA F, et al. Thermo-mechanical toner transfer for high-quality digital image correlation speckle patterns[J]. Optics and Lasers in Engineering, 2015, 75: 72-80. doi: 10.1016/j.optlaseng.2015.06.009
    [8]
    王德强. 基于数字图像相关法的NiCrMoV钢焊接接头原位疲劳实验研究[D]. 上海: 华东理工大学, 2018. WANG Deqiang. Experimental study on in-situ fatigue of welded joints of NiCrMoV steel based on digital image correlation method [D]. Shanghai: East China University of Science and Technology, 2018. (in Chinese

    WANG Deqiang. Experimental study on in-situ fatigue of welded joints of NiCrMoV steel based on digital image correlation method [D]. Shanghai: East China University of Science and Technology, 2018. (in Chinese)
    [9]
    SUN Chen, ZHOU Yihao, LI Yang, et al. Multiscale segmentation-aided digital image correlation for strain concentration characterization of a turbine blade fir-tree root[J]. Measurement Science and Technology, 2018, 29(4): 045205. doi: 10.1088/1361-6501/aa91df
    [10]
    梁晓峰, 龚新华, 卢磊. 拉伸载荷下纯钛应变局域化的多尺度研究[J]. 兵器材料科学与工程, 2024, 47(2): 9-14. LIANG Xiaofeng, GONG Xinhua, LU Lei. Multiscale study on strain localization of pure Ti under tensile load[J]. Ordnance Material Science and Engineering, 2024, 47(2): 9-14. (in Chinese

    LIANG Xiaofeng, GONG Xinhua, LU Lei. Multiscale study on strain localization of pure Ti under tensile load[J]. Ordnance Material Science and Engineering, 2024, 47(2): 9-14. (in Chinese)
    [11]
    SUTTON M, YAN J, TIWARI V, et al. The effect of out-of-plane motion on 2D and 3D digital image correlation measurements[J]. Optics and Lasers in Engineering, 2008, 46(10): 746-757. doi: 10.1016/j.optlaseng.2008.05.005
    [12]
    戴相录, 谢惠民, 王怀喜. 二维数字图像相关测量中离面位移引起的误差分析[J]. 实验力学, 2013, 28(1): 10-19. DAI Xianglu, XIE Huimin, WANG Huaixi. Error analysis caused by out-of-plane displacement in two-dimensional digital image correlation Measurement[J]. Journal of Experimental Mechanics, 2013, 28(1): 10-19. (in Chinese doi: 10.7520/1001-4888-12-102

    DAI Xianglu, XIE Huimin, WANG Huaixi. Error analysis caused by out-of-plane displacement in two-dimensional digital image correlation Measurement[J]. Journal of Experimental Mechanics, 2013, 28(1): 10-19. (in Chinese) doi: 10.7520/1001-4888-12-102
    [13]
    潘兵, 俞立平, 吴大方. 使用双远心镜头的高精度二维数字图像相关测量系统[J]. 光学学报, 2013, 33(4): 105-115. PAN Bing, YU Liping, WU Dafang. High precision two-dimensional digital image correlation measurement System using dual telecentric lens[J]. Acta Optica Sinica, 2013, 33(4): 105-115. (in Chinese

    PAN Bing, YU Liping, WU Dafang. High precision two-dimensional digital image correlation measurement System using dual telecentric lens[J]. Acta Optica Sinica, 2013, 33(4): 105-115. (in Chinese)
    [14]
    王宗正. 二维数字图像相关方法中离面位移的影响与矫正[D]. 天津: 天津大学, 2013. WANG Zongzheng. Influence and correction of out-of-plane displacement in two-dimensional digital image correlation method[D]. Tianjin: Tianjin University, 2013. (in Chinese

    WANG Zongzheng. Influence and correction of out-of-plane displacement in two-dimensional digital image correlation method[D]. Tianjin: Tianjin University, 2013. (in Chinese)
    [15]
    潘兵, 吴大方, 夏勇. 数字图像相关方法中散斑图的质量评价研究[J]. 实验力学, 2010, 25(2): 120-129. PAN Bing, WU Dafang, XIA Yong. Study of speckle pattern quality assessment used in digital image correlation[J]. Journal of Experimental Mechanics, 2010, 25(2): 120-129. (in Chinese

    PAN Bing, WU Dafang, XIA Yong. Study of speckle pattern quality assessment used in digital image correlation[J]. Journal of Experimental Mechanics, 2010, 25(2): 120-129. (in Chinese)
    [16]
    SCHREIER H W, BRAASCH J R, SUTTON M A. Systematic errors in digital image correlation caused by intensity interpolation[J]. Optical Engineering, 2000, 39: 2915-2921. doi: 10.1117/1.1314593
    [17]
    HUA Tao, XIE H, WANG S, et al. Evaluation of the quality of a speckle pattern in the digital image correlation method by mean subset fluctuation[J]. Optics and Laser Technology, 2011, 43: 9-13. doi: 10.1016/j.optlastec.2010.04.010
    [18]
    赵冉, 王雅楠, 李苗, 等. 光流场在光纤材料离面位移测量中的应用[J]. 光子学报, 2021, 50(12): 1212002. ZHAO Ran, WANG Yanan, LI Miao, et al. Application of optical flow field in out-of-plane displacement measurement for optical fiber material[J]. Acta Photonica Sinica, 2021, 50(12): 1212002. (in Chinese doi: 10.3788/gzxb20215012.1212002

    ZHAO Ran, WANG Yanan, LI Miao, et al. Application of optical flow field in out-of-plane displacement measurement for optical fiber material[J]. Acta Photonica Sinica, 2021, 50(12): 1212002. (in Chinese) doi: 10.3788/gzxb20215012.1212002
    [19]
    DANIELEWSKI H, ANTOSZEWSKI B, ZRAK A, et al. Microstructures and properties of laser welded Super 304 steel pipe joints using LNM304 filler wire as an additional material[C]// Proceedings of the 13th Symposium on Laser Technology. Jastarnia, Poland: The International Society for Optical Engineering (SPIE), 2018: 109740P.
    [20]
    PENG Linfa, LAI X, LEE H J, et al. Analysis of micro/mesoscale sheet forming process with uniform size dependent material constitutive model[J]. Materials Science and Engineering: A Structural Materials Properties Microstructure and Processing, 2009, 526: 93-99. doi: 10.1016/j.msea.2009.06.061
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (649) PDF downloads(52) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return