| Citation: | BAI Xiaohui, LI Yuxi, DUAN Chengao, et al. Numerical study on flow and heat transfer characteristics of octahedral truss microlattice array thermal shields[J]. Journal of Aerospace Power, 2026, 41（3）：20250263 doi: 10.13224/j.cnki.jasp.20250263
|
To address the thermal protection challenges in extreme thermal load environment of afterburner combustion chambers, a novel thermal protection structure based on an octahedral truss microlattice array was proposed. The research systematically elucidated the internal flow and heat transfer characteristics along with their underlying mechanisms. An optimized segmented configuration was developed to accommodate the non-uniform outflow distribution of coolant. The effects of key parameters, including microlattice size, porosity, and pore diameter, on surface temperature distribution were comprehensively investigated. The results indicated that the structure with a porosity of 47.6% can enhance the overall cooling effectiveness of the wall surface by 2.75% compared with the structure with a porosity of 58.4%. Helium, as the cooling medium, exhibited the best cooling performance, with its comprehensive cooling efficiency on the wall surface being increased by 7.99% and 11.20% compared with nitrogen and air, respectively; the segmented transpiration structure enabled 28.6% reduction in coolant flow rate while maintaining equivalent cooling effectiveness. This study confirmed that optimized microlattice architecture combined with coolant parameter selection can significantly enhance overall cooling system performance, thus providing crucial theoretical guidance for designing high-efficiency thermal protection structures.
| [1] |
张孝春, 孙雨超, 刘涛. 先进加力燃烧室设计技术综述[J]. 航空发动机, 2014, 40(2): 24-30, 60. ZHANG Xiaochun, SUN Yuchao, LIU Tao. Summary of advanced afterburner design technology[J]. Aeroengine, 2014, 40(2): 24-30, 60. (in Chinese doi: 10.13477/j.cnki.aeroengine.2014.02.006
ZHANG Xiaochun, SUN Yuchao, LIU Tao. Summary of advanced afterburner design technology[J]. Aeroengine, 2014, 40(2): 24-30, 60. (in Chinese) doi: 10.13477/j.cnki.aeroengine.2014.02.006
|
| [2] |
尹成茗, 张荣春, 樊未军, 等. 一种一体化加力燃烧室的数值模拟[J]. 航空动力学报, 2018, 33(2): 470-476. YIN Chengming, ZHANG Rongchun, FAN Weijun, et al. Numerical simulation on a type of the integrated afterburner[J]. Journal of Aerospace Power, 2018, 33(2): 470-476. (in Chinese doi: 10.13224/j.cnki.jasp.2018.02.026
YIN Chengming, ZHANG Rongchun, FAN Weijun, et al. Numerical simulation on a type of the integrated afterburner[J]. Journal of Aerospace Power, 2018, 33(2): 470-476. (in Chinese) doi: 10.13224/j.cnki.jasp.2018.02.026
|
| [3] |
XIN Qiurui, BAI Xiaohui, JIN Helong, et al. Comprehensive study on cooling effectiveness and thermoelectric conversion of a novel helium/hydrogen-based closed Brayton cooling system for a hydrogen aero-engine[J]. Case Studies in Thermal Engineering, 2025, 67: 105741. doi: 10.1016/j.csite.2025.105741
|
| [4] |
刘大响. 一代新材料, 一代新型发动机: 航空发动机的发展趋势及其对材料的需求[J]. 材料工程, 2017, 45(10): 1-5. LIU Daxiang. One generation of new material, one generation of new type engine: development trend of aero-engine and its requirements for materials[J]. Journal of Materials Engineering, 2017, 45(10): 1-5. (in Chinese
LIU Daxiang. One generation of new material, one generation of new type engine: development trend of aero-engine and its requirements for materials[J]. Journal of Materials Engineering, 2017, 45(10): 1-5. (in Chinese)
|
| [5] |
方昌德. 航空发动机百年回顾[J]. 燃气涡轮试验与研究, 2003, 16(4): 1-5. FANG Changde. A century of aero-engine in retrospect[J]. Gas Turbine Experiment and Research, 2003, 16(4): 1-5. (in Chinese
FANG Changde. A century of aero-engine in retrospect[J]. Gas Turbine Experiment and Research, 2003, 16(4): 1-5. (in Chinese)
|
| [6] |
ZHU Yinhai, PENG Wei, XU Ruina, et al. Review on active thermal protection and its heat transfer for airbreathing hypersonic vehicles[J]. Chinese Journal of Aeronautics, 2018, 31(10): 1929-1953. doi: 10.1016/j.cja.2018.06.011
|
| [7] |
ZHANG Silong, LI Xin, ZUO Jingying, et al. Research progress on active thermal protection for hypersonic vehicles[J]. Progress in Aerospace Sciences, 2020, 119: 100646. doi: 10.1016/j.paerosci.2020.100646
|
| [8] |
李锋, 张青藩, 何家德, 等. 离散孔板冷却效率及其换热规律的研究[J]. 航空动力学报, 1997, 12(1): 66-70. LI Feng, ZHANG Qingfan, HE Jiade, et al. Transfer rule for discrete hole film cooling[J]. Journal of Aerospace Power, 1997, 12(1): 66-70. doi: 10.13224/j.cnki.jasp.1997.01.017
LI Feng, ZHANG Qingfan, HE Jiade, et al. Transfer rule for discrete hole film cooling[J]. Journal of Aerospace Power, 1997, 12(1): 66-70. doi: 10.13224/j.cnki.jasp.1997.01.017
|
| [9] |
SCRITTORE J J, THOLE K A, BURD S W. Investigation of velocity profiles for effusion cooling of a combustor liner[J]. Journal of Turbomachinery, 2007, 129(3): 518-526. doi: 10.1115/1.2720492
|
| [10] |
伍楠. 发散冷却关键问题的实验和数值研究[D]. 合肥: 中国科学技术大学, 2019. WU Nan. Experimental and numerical investigations on the key problems of transpiration cooling[D]. Hefei: University of Science and Technology of China, 2019. (in Chinese
WU Nan. Experimental and numerical investigations on the key problems of transpiration cooling[D]. Hefei: University of Science and Technology of China, 2019. (in Chinese)
|
| [11] |
梁春华, 王鸣, 刘殿春. 战斗机发动机涡轮叶片层板发散冷却技术的发展[J]. 航空制造技术, 2013, 56(9): 90-93. LIANG Chunhua, WANG Ming, LIU Dianchun. Development of laminated transpiration-cooled turbine blade for fighter engine[J]. Aeronautical Manufacturing Technology, 2013, 56(9): 90-93. (in Chinese doi: 10.16080/j.issn1671-833x.2013.09.017
LIANG Chunhua, WANG Ming, LIU Dianchun. Development of laminated transpiration-cooled turbine blade for fighter engine[J]. Aeronautical Manufacturing Technology, 2013, 56(9): 90-93. (in Chinese) doi: 10.16080/j.issn1671-833x.2013.09.017
|
| [12] |
董文杰. 发散冷却基础问题的理论与数值研究[D]. 合肥: 中国科学技术大学, 2018. DONG Wenjie. Theoretical and numerical investigations on basic problems of transpiration cooling[D]. Hefei: University of Science and Technology of China, 2018. (in Chinese
DONG Wenjie. Theoretical and numerical investigations on basic problems of transpiration cooling[D]. Hefei: University of Science and Technology of China, 2018. (in Chinese)
|
| [13] |
KONG Dehai, CHEN Wenbin, NIU Xiying, et al. A comparative study of internal heat transfer enhancement of impingement/effusion cooling roughened by solid rib and slit rib[J]. Physics of Fluids, 2024, 36: 015106. doi: 10.1063/5.0179254
|
| [14] |
苏浩. 发散冷却系统冷却能力和流动换热特性的数值研究[D]. 合肥: 中国科学技术大学, 2020. SU Hao. Numerical investigations on the cooling capacity and characteristics of flow and heat transfer of transpiration cooling[D]. Hefei: University of Science and Technology of China, 2020. (in Chinese
SU Hao. Numerical investigations on the cooling capacity and characteristics of flow and heat transfer of transpiration cooling[D]. Hefei: University of Science and Technology of China, 2020. (in Chinese)
|
| [15] |
汪强兵, 李广忠, 汤慧萍, 等. 粉末及烧结工艺对金属多孔材料性能的影响[J]. 稀有金属材料与工程, 2017, 46(9): 344-347. WANG Qiangbing, LI Guangzhong, TANG Huiping, et al. Effect of powder and sintering process on properties of powder metal porous materials[J]. Rare Metal Materials and Engineering, 2017, 46(9): 344-347. (in Chinese
WANG Qiangbing, LI Guangzhong, TANG Huiping, et al. Effect of powder and sintering process on properties of powder metal porous materials[J]. Rare Metal Materials and Engineering, 2017, 46(9): 344-347. (in Chinese)
|
| [16] |
宋建华. 八面体单元桁架结构的构建和简化方法分析[D]. 哈尔滨: 哈尔滨工程大学, 2014. SONG Jianhua. Analyzing on the method of constructing and simplifying octahedral unit truss structure[D]. Harbin: Harbin Engineering University, 2014. (in Chinese
SONG Jianhua. Analyzing on the method of constructing and simplifying octahedral unit truss structure[D]. Harbin: Harbin Engineering University, 2014. (in Chinese)
|
| [17] |
BAI Xiaohui, ZHENG Zihao, NAKAYAMA A. Heat transfer performance analysis on lattice core sandwich panel structures[J]. International Journal of Heat and Mass Transfer, 2019, 143: 118525. doi: 10.1016/j.ijheatmasstransfer.2019.118525
|
| [18] |
DESHPANDE V S, FLECK N A, ASHBY M F. Effective properties of the octet-truss lattice material[J]. Journal of the Mechanics and Physics of Solids, 2001, 49(8): 1747-1769. doi: 10.1016/S0022-5096(01)00010-2
|
| [19] |
EKADE P, KRISHNAN S. Fluid flow and heat transfer characteristics of octet truss lattice geometry[J]. International Journal of Thermal Sciences, 2019, 137: 253-261. doi: 10.1016/j.ijthermalsci.2018.11.031
|
| [20] |
SAIGAL A, TUMBLESTON J, VOGEL H, et al. Mechanical response of octahedral and octet-truss lattice structures fabricated using the CLIP technology[R]. Bangkok, Thailand: 2016 International Conference on Computational Modeling, Simulation and Applied Mathematics (CMSAM 2016), 2016.
|
| [21] |
CHENG Zhilong, XU Ruina, JIANG Peixue. Morphology, flow and heat transfer in triply periodic minimal surface based porous structures[J]. International Journal of Heat and Mass Transfer, 2021, 170: 120902. doi: 10.1016/j.ijheatmasstransfer.2021.120902
|
| [22] |
白晓辉, 刘存良, 孟宪龙, 等. 八面体桁架结构在内冷通道中的流动传热特性研究[J]. 推进技术, 2022, 43(7): 201018. BAI Xiaohui, LIU Cunliang, MENG Xianlong, et al. Flow and heat transfer characteristics of octet truss structure in internal cooling channel[J]. Journal of Propulsion Technology, 2022, 43(7): 201018. (in Chinese
BAI Xiaohui, LIU Cunliang, MENG Xianlong, et al. Flow and heat transfer characteristics of octet truss structure in internal cooling channel[J]. Journal of Propulsion Technology, 2022, 43(7): 201018. (in Chinese)
|
| [23] |
BAI Xiaohui, XIN Qiurui, DUAN Chengao, et al. Research on flow structure and heat transfer mechanism of windward bend lattice frame[J]. Thermal Science and Engineering Progress, 2024, 56: 103084. doi: 10.1016/j.tsep.2024.103084
|
| [24] |
BAI Xiaohui, ZHENG Zihao, LIU Cunliang, et al. Metal frame structures with controlled anisotropic thermal conductivity[J]. International Journal of Heat and Mass Transfer, 2020, 148: 119064. doi: 10.1016/j.ijheatmasstransfer.2019.119064
|
| [25] |
QU Z G, WANG T S, TAO W Q, et al. A theoretical octet-truss lattice unit cell model for effective thermal conductivity of consolidated porous materials saturated with fluid[J]. Heat and Mass Transfer, 2012, 48(8): 1385-1395. doi: 10.1007/s00231-012-0985-y
|
| [26] |
DIXIT T, NITHIARASU P, KUMAR S. Numerical evaluation of additively manufactured lattice architectures for heat sink applications[J]. International Journal of Thermal Sciences, 2021, 159: 106607. doi: 10.1016/j.ijthermalsci.2020.106607
|
| [27] |
章思龙, 秦江, 周伟星, 等. 高超声速推进再生冷却研究综述[J]. 推进技术, 2018, 39(10): 2177-2190. ZHANG Silong, QIN Jiang, ZHOU Weixing, et al. Review on regenerative cooling technology of hypersonic propulsion[J]. Journal of Propulsion Technology, 2018, 39(10): 2177-2190. (in Chinese
ZHANG Silong, QIN Jiang, ZHOU Weixing, et al. Review on regenerative cooling technology of hypersonic propulsion[J]. Journal of Propulsion Technology, 2018, 39(10): 2177-2190. (in Chinese)
|
| [28] |
ZHENG Zihao, BAI Xiaohui, NAKAYAMA A. A novel way to control wall temperature distribution by grading blowing rate[J]. ASME Journal of Heat and Mass Transfer, 2023, 145(3): 031803. doi: 10.1115/1.4055889
|
| [29] |
LIU Yuanqing, JIANG Peixue, XIONG Yanbin, et al. Experimental and numerical investigation of transpiration cooling for sintered porous flat plates[J]. Applied Thermal Engineering, 2013, 50(1): 997-1007. doi: 10.1016/j.applthermaleng.2012.08.028
|
DownLoad:
