| Citation: | YAO Yunjia, YAN Yifei, TAO Zhi, et al. Film cooling characteristics of novel adjustable guide vane endwalls in variable geometry turbines[J]. Journal of Aerospace Power, 2026, 41（8）：20250315 doi: 10.13224/j.cnki.jasp.20250315
|
Combining experimental and numerical simulation, the endwall film cooling characteristics of novel variable guide vane were further examined. The film cooling characteristics on the endwalls of both the conventional vane and the novel variable guide vane were compared under different exit Mach number (
| [1] |
ALQEFL M H, NAWATHE K P, CHEN P, et al. Aero-thermal aspects of film cooled nozzle guide vane endwall: Part 2 thermal measurements[J]. Journal of Turbomachinery, 2021, 143(12): 121010. doi: 10.1115/1.4051556
|
| [2] |
ALQEFL M H, NAWATHE K P, CHEN P, et al. Aero-thermal aspects of film cooled nozzle guide vane endwall: Part 1 aerodynamics[J]. Journal of Turbomachinery, 2021, 143(12): 121009. doi: 10.1115/1.4050329
|
| [3] |
OKE R A, SIMON T W, BURD S W, et al. Measurements in a turbine cascade over a contoured endwall: discrete hole injection of bleed flow[R]. ASME Paper 2000-GT-0239 , 2000.
|
| [4] |
ZHANG L J, JAISWAL R S. Turbine nozzle endwall film cooling study using pressure-sensitive paint[J]. Journal of Turbomachinery, 2001, 123(4): 730-738. doi: 10.1115/1.1400113
|
| [5] |
ZHANG L, MOON H K. Turbine nozzle endwall inlet film cooling: the effect of a back-facing step and velocity ratio[R]. ASME Paper IMECE2004-59117, 2004.
|
| [6] |
ZHANG L Z, MOON H K. Comparison of two axisymmetric profiles on blade platform film cooling[R]. ASME Paper IMECE2004-59117, 2004.
|
| [7] |
FRIEDRICHS S, HODSON H P, DAWES W N. Heat transfer committee best paper of 1995 award: distribution of film-cooling effectiveness on a turbine endwall measured using the ammonia and diazo technique[J]. Journal of Turbomachinery, 1996, 118(4): 613-621.
|
| [8] |
FRIEDRICHS S, HODSON H P, DAWES W N. Aerodynamic aspects of endwall film-cooling[J]. Journal of turbomachinery, 1997, 119(4): 786-793. doi: 10.1115/1.2841189
|
| [9] |
FRIEDRICHS S, HODSON H P, DAWES W N. The design of an improved endwall film-cooling configuration[R]. ASME Paper 98-GT-483, 1998.
|
| [10] |
HUYSSEN B B, SHOTE A S, MAHMOOD G I. Upstream endwall film-cooing in a vane cascade with cylindrical shape holes[J]. Journal of Thermophysics and Heat Transfer, 2023, 37(3): 676-689. doi: 10.2514/1.T6607
|
| [11] |
LI Z, BAI B, LI J, et al. Endwall heat transfer and cooling performance of a transonic turbine vane with upstream injection flow[J]. Journal of Turbomachinery, 2022, 144(4): 041004. doi: 10.1115/1.4052457
|
| [12] |
MAO S, SIBOLD R, NG W F, et al. Experimental study of the endwall heat transfer of a transonic nozzle guide vane with upstream jet purge cooling: Part 1 effect of density ratio[J]. Journal of Turbomachinery, 2022, 144(5): 051003. doi: 10.1115/1.4052754
|
| [13] |
MAO S, SIBOLD R, NG W F, et al. Experimental study of the endwall heat transfer of a transonic nozzle guide vane with upstream jet purge cooling: Part 2 effect of combustor-nozzle guide vane misalignment[J]. Journal of Turbomachinery, 2022, 144(5): 051004. doi: 10.1115/1.4052738
|
| [14] |
SHIAU C C, SAHIN I, ULLAH I, et al. Transonic turbine vane endwall film cooling using the pressure-sensitive paint measurement technique[J]. Journal of Turbomachinery, 2020, 142(8): 081004. doi: 10.1115/1.4045990
|
| [15] |
MOFFITT T, SCHUM H. Performance of a single-stage turbine as affected by variable statorarea[R]. AIAA-1969-525, 1969.
|
| [16] |
BHAVSAR H, MISTRY C S. Numerical investigations on the effect of pivot shapes in part clearance flow field of variable area LP turbine nozzle vane[R]. ASME Paper GT2020-15969, 2020.
|
| [17] |
YAO Yunjia, LI Fengchao, XIANG Jiacheng, et al. Experimental study on the aerodynamic performance of variable geometry low-pressure turbine adjustable guide vanes[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2023, 237(4): 669-686. doi: 10.1177/09576509221141933
|
| [18] |
WALKINGSHAW J, SPENCE S, EHRHARD J, et al. A numerical study of the flow fields in a highly off-design variable geometry turbine[R]. ASME Paper GT2010-22669, 2010.
|
| [19] |
SPENCE S W T, O'NEILL J W, CUNNINGHAM G. An investigation of the flowfield through a variable geometry turbine stator with vane endwall clearance[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2006, 220(8): 899-910. doi: 10.1243/09576509JPE171
|
| [20] |
Wu Z, Fang X, Liu S. Experimental research on aerodynamic performance of variable geometry low pressure turbine[R]. AIAA 2017-4562, 2017.
|
| [21] |
张宜奎, 钟易成, 徐亮, 等. 导叶安装角变化对变几何涡轮性能影响的数值研究[J]. 燃气涡轮试验与研究, 2020, 33(04): 9-14. ZHANG Yikui, ZHONG Yicheng, XU Liang, et al. The influence of stagger angle variation of guide vane on variable geometry turbine performance[J]. Gas Turbine Experiment and Research, 2020, 33(04): 9-14. (in Chinese
ZHANG Yikui, ZHONG Yicheng, XU Liang, et al. The influence of stagger angle variation of guide vane on variable geometry turbine performance[J]. Gas Turbine Experiment and Research, 2020, 33(04): 9-14. (in Chinese)
|
| [22] |
BRINGHENTI C, BARBOSA J R. Methodology for gas turbine performance improvement using variable-geometry compressors and turbines[J]. Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, 2004, 218(7): 541-549. doi: 10.1243/0957650042456980
|
| [23] |
GAO Jie, WEI Ming, LIU Pengfei, et al. Improved clearance designs to minimize aerodynamic losses in a variable geometry turbine vane cascade[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, 232(17): 3085-3101. doi: 10.1177/0954406217729716
|
| [24] |
WANG Zhihui, MA Chaochen, ZHAO Rui, et al. Experimental and numerical investigation on suppressing end-clearance leakage flow for variable nozzle turbine guide vane[J]. Aerospace Science and Technology, 2022, 131: 108012. doi: 10.1016/j.ast.2022.108012
|
| [25] |
ZHOU K, ZHENG X. A novel design towards reducing leakage loss for variable geometry turbines[J]. Processes, 2022, 11(1): 21. doi: 10.3390/pr11010021
|
| [26] |
汤涛, 李彦静, 宋义康, 等. 变几何涡轮蛤壳状导叶的气动性能数值模拟分析[J]. 中国舰船研究, 2022, 17(2): 212-219. TANG Tao, LI Yanjing, SONG Yikang, et al. Numerical simulation analysis on the aerodynamic performance of variable geometry turbine clamshell guide vanes[J]. Chinese Journal of Ship Research, 2022, 17(2): 212-219. (in Chinese
TANG Tao, LI Yanjing, SONG Yikang, et al. Numerical simulation analysis on the aerodynamic performance of variable geometry turbine clamshell guide vanes[J]. Chinese Journal of Ship Research, 2022, 17(2): 212-219. (in Chinese)
|
| [27] |
YAO Yunjia, TAO Zhi, ZHOU Kun, et al. Aerodynamic performance measurement of a novel variable geometry turbine adjustable guide vane scheme by experimental study[J]. Aerospace Science and Technology, 2023, 140: 108413. doi: 10.1016/j.ast.2023.108413
|
| [28] |
YAN Yifei, SONG Liming, YAO Yunjia, et al. Experimental study on endwall film cooling performance of an adjustable guide vane[J]. International Journal of Thermal Sciences, 2025, 208: 109440. doi: 10.1016/j.ijthermalsci.2024.109440
|
DownLoad:
