| Citation: | GAO Jian-hui, WEN Wei-dong, CUI Hai-tao. Genetic algorithm model-based optimization for float-wall with thermal-structural coupled[J]. Journal of Aerospace Power, 2012, 27(1): 41-47.
|
| [1] |
梁春华.现代典型军民用涡扇发动机的先进技术[J].航空科学技术,2004,90(2):20-24. LIANG Chunhua.Modern typical military and civilian use advanced technology of turbofan engine[J].Aviation Science and Technology,2004,90(2):20-24.(in Chinese)
|
| [2] |
赵清杰,李彬.浮动瓦块冷却结构在燃烧室中的应用和发展[J].燃气涡轮试验与研究,2001,14(1):10-13. ZHAO Qingjie,LI Bin.Application and development of floating panel cooling structure in combustors[J].Gas Turbine Experiment and Research,2001,14(1):10-13.(in Chinese)
|
| [3] |
Andrews G E,Khalifa I M,Asere A A,et al.Full coverage effusion film cooling with inclined holes.ASME GT95-274,1995.
|
| [4] |
Cho H H,Rhee D H,Goldstein R J.Effect of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing.ASME GT2004-53685,2004.
|
| [5] |
Rhee D H,Choi J H,Cho H H.Flow and heat (mass) transfer characteristics in an impingement/effusion cooling system with crossflow.ASME GT2002-30474,2002.
|
| [6] |
林宇震,俞文利,刘高恩,等.冲击加发散双层壁冷却方式压降分配对斜孔内对流换热影响的研究[J].航空学报,2003,24(2):97-101. LIN Yuzhen,YU Wenli,LIU Gaoen,et al.Influence of pressure drop distribution on the convection heat transfer inside the inclined hole of impingement/effusion cooling[J].Acta Aeronautica et Astronautica Sinica,2003,24(2):97-101.(in Chinese)
|
| [7] |
许全宏,林宇震,刘高恩.冲击/发散复合冷却方式发散壁换热系数研究[J].航空动力学报,2004,19(2):213-218. XU Quanhong,LIN Yuzhen,LIU Gaoen.Study of the effusion wall film heat transfer coefficients of impingement/effusion double wall cooling method[J].Journal of Aerospace Power,2004,19(2):213-218.(in Chinese)
|
| [8] |
陈焱,吉洪湖,胡娅萍,等.致密微孔壁绝热冷却效果研究[J].工程热物理学报,2006,27(增刊2):25-28. CHEN Yan,JI Honghu,HU Yaping,et al.Investigation of adiabatic cooling effectiveness of an effusion cooled plate[J].Journal of Engineering Thermophysics,2006,27(Suppl 2):25-28.(in Chinese)
|
| [9] |
宋双文,杨卫华,胡好生,等.冲击+逆向对流+气膜冷却传热特性的研究[J].航空动力学报,2007,22(9):1418-1421. SONG Shuangwen,YANG Weihua,HU Haosheng,et al.Experimental study of the heat transfer characteristics of combined cooling of impingement+reversed[J].Journal of Aerospace Power,2007,22(9):1418-1421.(in Chinese)
|
| [10] |
唐庆如.冲击加多斜孔双层壁对流与冲击换热优化研究[J].航空动力学报,2007,22(3):375-379. TANG Qingru.A study of optimization of convection and heat transfer of impingement/effusion double wall[J].Journal of Aerospace Power,2007,22(3):375-379.(in Chinese)
|
| [11] |
李彬,吉洪湖,江义军.冲击-发散冷却火焰筒浮动瓦片三维壁温计算分析[J].航空动力学报,2007,22(3):370-374. LI Bin,JI Honghu,JIANG Yijun.Numerical analysis of 3D temperature field of an impingement-effusion cooled flame tube floating tile[J].Journal of Aerospace Power,2007,22(3):370-374.(in Chinese)
|
| [12] |
李彬.冲击-致密微孔浮动壁火焰筒冷却研究.南京:南京航空航天大学,2007. LI Bin.Investigation of impingement/effusion float-wall cooling of fame tube.Nanjing:Nanjing University of Aeronautics and Astronautics,2007.(in Chinese)
|
| [13] |
张宏建.燃烧室浮动壁结构优化方法研究.南京:南京航空航天大学,2005. ZHANG Hongjian.Structure optimization method of the float-tile.Nanjing:Nanjing University of Aeronautics and Astronautics,2005.(in Chinese)
|
| [14] |
石炜.模糊遗传算法-有限元与浮动壁结构优化研究.南京:南京航空航天大学,2006. SHI Wei.FGA-FEM method and structure optimization of float-wall in combustor.Nanjing:Nanjing University of Aeronautics and Astronautics,2006.(in Chinese)
|
| [15] |
孙明华,崔海涛,温卫东.基于精英保留遗传算法的连续结构多约束拓扑优化[J].航空动力学报,2006,21(4):732-737. SUN Minghua,CUI Haitao,WEN Weidong. Topology optimization of continuum structure under multiple onstraints using genetic algorithm with elitist strategy[J].Journal of Aerospace Power,2006,21(4):732-737.(in Chinese)
|
| [16] |
葛继科,邱玉辉,吴春明,等.遗传算法研究综述[J].计算机应用研究,2008,25(10):2911-2916. GE Jike,QIU Yuhui,WU Chunming,et al.Summary of genetic algorithms research[J].Application Research of Computers,2008,25(10):2911-2916.(in Chinese)
|
DownLoad: