| Citation: | DENG Ying, SUN Rui-jie, XIE Jian-wen, YAN Xiao-jun. Creep property variation at different regions on a directionally solidified turbine blade[J]. Journal of Aerospace Power, 2012, 27(1): 104-109.
|
| [1] |
《机械工程材料性能数据手册》编委会.机械工程材料性能数据手册[M].北京:机械工业出版社,1995.
|
| [2] |
Marahleh G,Kheder A R,Hamad H F.Creep life prediction of service-exposed turbine blades[J].Materials Science and Engineering A,2006,433(1-2):305-309.
|
| [3] |
Sherby O D,Taleff E M.Influence of grain size,solute atoms and second-phase particles on creep behavior of polycrystalline solids[J].Materials Science and Engineering A,2002,322(1-2):89-99.
|
| [4] |
陈荣章.航空铸造涡轮叶片合金和工艺发展的回顾与展望[J].航空制造技术,2002(2):18-24. CHEN Rongzhang.Review and prospect of developments of cast super-alloys and technology of aeroengine turbine blade[J].Aeronautical Manufacturing Technology,2002(2): 18-24.(in Chinese)
|
| [5] |
胡壮麒,刘丽荣,金涛,等.镍基单晶高温合金的发展[J].航空发动机,2005,31(3):1-7. HU Zhuangqi,LIU Lirong,JIN Tao,et al.Development of the Ni-base single crystal superalloys[J].Aeroengine,2005, 31(3):1-7.(in chinese)
|
| [6] |
Yang X L,Dong H B,Wang W,et al.Microscale simulation of stray grain formation in investment cast turbine blades[J].Material Science and Engineering,2004,386(1-2):129-139.
|
| [7] |
许庆彦,熊守美,柳百成.铸造合金的微观组织模拟研究进展[J].材料导报,2002,16(1):11-14. XU Qingyan,XIONG Shoumei,LIU Baicheng.Advances in microstructure simulation of casting alloy[J].Materials Review,2002,16(1):11-14.(in chinese)
|
| [8] |
岳珠峰,吕震宙,杨治国,等.晶体取向的偏差和随机性对镍基单晶叶片强度与蠕变寿命的影响[J].航空动力学报,2003,18(4):477-480. YUE Zhufeng,LU Zhenzhou,YANG Zhiguo,et al.Influence of deviation and randomness of crystallographic orientations on the strength and life of nickel-base single crystal superalloy turbine blades[J].Journal of Aerospace Power,2003,18(4):477-480.(in Chinese)
|
| [9] |
Arakere N K,Swanson G.Effect of crystal orientation on fatigue failure of single crystal nickel base turbine blade superalloys[J].Journal of Engineering for Gas Turbines and Power,2002,124(1):161-176.
|
| [10] |
Zhao Y,Wang L,Li H Y,et al.Effects of recrystallization on the low cycle fatigue behavior of directionally solidified superalloy DZ40M[J].Rare Metals,2008,27(4):425-428.
|
| [11] |
Alexandre F,Deyber S,Pineau A.Modeling the optimum grain size on the low cycle fatigue life of a Ni-based superalloy in the presence of two possible crack initiation sites[J].Scripta Materialia,2004,50(1):25-30.
|
| [12] |
Wang W,Kermanpur A,Lee P D,et al.Simulation of dendritic growth in the platform region of single crystal superalloy turbine blades[J].Journal of Materials Science,2003,38(21):4385-4391.
|
| [13] |
Wang W,Lee P D,McLean M.A model of solidification microstructures in nickel-based superalloys:predicting primary dendrite spacing selection[J].Acta Material,2003,51(10):2971-2987.
|
| [14] |
孙瑞杰,闫晓军,聂景旭.定向凝固涡轮叶片高温低周疲劳的破坏特点[J].航空学报,2011,32(2):337-343. SUN Ruijie,YAN Xiaojun,NIE Jingxu.Failure characteristics of directional solidification turbine blade under high temperature low cycle fatigue load[J].Acta Aeronautica et Astronautica Sinica,2011,32(2):337-343.(in Chinese)
|
| [15] |
冯广召,沈军,邹敏佳,等.抽拉速度对高温合金DZ125定向凝固中缩松的影响[J].铸造,2009,58(5):427-430. FENG Guangzhao,SHEN Jun,ZOU Minjia,et al.Influence of withdrawal rate on the micro-porosity of super-alloy DZ125 in directional solidification[J].Foundry,2009,58(5):427-430.(in Chinese)
|
| [16] |
Yue Z F,Lu Z Z,Zheng C Q,et al.Life study of nickel-based single crystal turbine blades:viscoplastic ctrystallographic constitutive behavior[J].Theoretical and Applied Fracture Mechanics,1996,24(2):139-145.
|
| [17] |
Chen L J,Liu Y H,Xie L Y.Power-exponent function model for low-cycle fatigue life prediction and its applications[J].International Journal of Fatigue,2007,29(1):1-9.
|
DownLoad: