| Citation: | WANG Da-lei, PIAO Ying. Influence of tip clearance size on flow losses of a transonic high pressure turbine stage[J]. Journal of Aerospace Power, 2012, 27(1): 169-175.
|
| [1] |
刘宝杰,邹正平.叶轮机计算流体动力学技术现状与发展趋势[J].航空学报,2002,23(5):394-404. LIU Baojie,ZOU Zhengping.Persent status and future development of CFD in turbomachnery[J].Acta Aeronautica et Astronautica Sinica,2002,23(5):394-404.(in Chinese)
|
| [2] |
Gümmer V,Goller M,Swoboda M.Numerical investigation of endwall boundary layer removal on highly-loaded axial compressor blade rows.ASME GT 2005-68699,2005.
|
| [3] |
Rao N M,Camci C.Axial turbine tip desensitization by injection from a tip trench Part 1:effect of injection mass flow rat.ASME GT 2004-53256,2004.
|
| [4] |
Rao N M,Camci C.Axial turbine tip desensitization by injection from a tip trench Part 2:leakage flow sensitivity to injection location.ASME GT 2004- 53258,2004.
|
| [5] |
Wiseman M W,Guo T H.An investigation of life extending control techniques for gas turbine engines //Proceedings of the American Control Conference.Arlington,VA:Institute of Electrical and Electronic Engineers,2001:3706-3707.
|
| [6] |
Bindon J P.The measurement and formation of tip clearance loss[J].ASME Journal of Turbomachinery,1989,111(3):257-263.
|
| [7] |
Yamamoto A.Endwall flow/loss mechanisms in a linear turbine cascade with blade tip clearance[J].ASME Journal of Turbomachinery,1989,111(2):246-275.
|
| [8] |
XIAO Xinwen,Andrew A.Tip clearance effects in a turbine rotor Part Ⅰ:pressure field and loss.ASME GT2001 ,2001.
|
| [9] |
Andrew A,XIAO Xinwen.Tip clearance effects in a turbine rotor flow Part Ⅱ:velocity field and physics.ASME GT2001,2001.
|
| [10] |
XIAO Xinwen.Investigation of tip clearance flow physics in axial flow turbine rotors.Pennsylvania:The Pennsylvania State University,2000.
|
| [11] |
Papa M,Goldstein R,Gori F.Effects of tip geometry and tip clearance on the mass/heat transfer from a large-scale gas turbine blade[J].ASME Journal of Turbomachinery,2003,125(1):91-96.
|
| [12] |
祁明旭,丰镇平.透平动叶顶部间隙流的表现形式及其对透平性能的影响[J].西安交通大学学报,2005,39(3):244-246. QI Mingxu,FENG Zhenping.Representation formation of tip clearance flow and influence on turbine performance[J].Journal of Xi'an Jiaotong University,2005,39(3):244-246.(in Chinese)
|
| [13] |
祁明旭,丰镇平.透平动叶顶部间隙流的端壁二次流结构研究[J].西安交通大学学报,2005,39(5):445-449. QI Mingxu,FENG Zhenping.Study on tip clearance flow of turbine blade-endwall secondary flow structure[J].Journal of Xi'an Jiaotong University,2005,39(5):445-449.(in Chinese)
|
| [14] |
许开福,乔渭阳.涡轮叶尖间隙流动的数值模拟[J].热能动力工程,2009,24(4):432-436. XU kaifu,QIAO Weiyang.Numerical simulation of turbine blade tip leakage flows [J].Jouranl of Engineering for Theamal Energy and Power,2009,24(4):432-436.(in Chinese)
|
| [15] |
ZHAO Qingjun,QIAO Jiafei.Influence of tip clearance size on flow characteristics of a vaneless counter rotating turbine.AIAA 2009-4836,2009.
|
| [16] |
牛茂升,藏述升.间隙高度对涡轮叶顶间隙流动的影响[J].工程热物理学报,2008,29(6):935-939. NIU Maosheng,ZANG Shusheng.Effect of tip clearance height on tip clearance flow in turbine rotors [J].Journal of Engineering Thermophysics,2008,29(6):935-939.(in Chinese)
|
| [17] |
黄忠湖,王月奇.叶尖间隙对跨音涡轮性能影响的试验研究[J].航空动力学报,1989,4(4):333-390. HUANG Zhonghu,WANG Yueqi.An experiment study of tip clearance effects on the performance of an axial transonic turbine[J].Journal of Aerospace Power,1989,4(4):333-390.(in Chinese)
|
| [18] |
赵旺东,周禹彬.叶尖间隙对涡轮气动性能影响的试验研究[J].燃气涡轮试验与研究,2009,22(3):19-22. ZHAO Wangdong,ZHOU Yubin.Effects of turbine tip clearance on gas turbine performance[J].Gas Turbine Experiment and Research,2009,22(3):19-22.(in Chinese)
|
DownLoad: