| Citation: | CAI Xiang-wei, FANG Zong-de, SU Jin-zhan. Study on meshing characteristics of face gear drive with arcuate tooth based of manufacture on NC machine[J]. Journal of Aerospace Power, 2012, 27(1): 198-202.
|
| [1] |
Litvin F L,Fuentes A.Gear geometry and applied theory[M].Cambridge:Cambridge University Press,2004.
|
| [2] |
Litvin F L,Fuentes A,Zanzi C,et al.Design,generation,and stress analysis of two versions of geometry of face-gear drives[J].Mechanism and Machine Theory,2002,37(10):1179-1211.
|
| [3] |
Litvin F L,Gonzalez-Perez I,Fuentes A,et al.Design,generation and stress analysis of face-gear drive with helical pinion[J].Computer Methods in Applied Mechanics and Engineering,2005,194(36-38):3870-3901.
|
| [4] |
Chang S H,Chung T D,Lu S S.Tooth contact analysis of face-gear drives[J].International Journal of Mechanical Sciences,2000,42(3):487-502.
|
| [5] |
朱如鹏,高德平.在面齿轮设计中避免根切和齿顶变尖的设计方法的研究[J].中国机械工程,1999,10(11):1274-1276. ZHU Rupeng,GAO Deping.Study on the method of avoiding dedendum undercutting and addendum pointing in face gear design[J].China Mechanical Engineering,1999,10(11):1274-1276.(in Chinese)
|
| [6] |
沈云波,方宗德,赵宁,等.斜齿面齿轮齿宽的设计[J].航空动力学报,2008,23(4):754-758. SHEN Yunbo,FANG Zongde,ZHAO Ning,et al.The design of face width of the face-gear drives with helical pinion[J].Journal of Aerospace Power,2008,23(4):754-758.(in Chinese)
|
| [7] |
赵宁,曾晓春,郭辉,等.斜齿面齿轮齿面仿真及其轮齿接触分析[J].航空动力学报,2008,23(10):1927-1932. ZHAO Ning,ZENG Xiaochun,Guo Hui,et al.Tooth contact analysis of face gear drive with helical pinion and simulation of the tooth face[J].Journal of Aerospace Power,2008,23(10):1927-1932.(in Chinese)
|
| [8] |
方宗德,沈云波.弧线齿面齿轮副及其加工方法:中国,200710017256 ,2010-05-19.
|
| [9] |
方宗德,曹雪梅,沈云波.弧线齿面齿轮的齿面设计与加工[J].航空动力学报,2010,1(25):224-227. FANG Zongde,CAO Xuemei,SHEN Yunbo.Tooth surface design and manufacture for spiral bevel face gear[J].Journal of Aerospace Power,2010,1(25):224-227.(in Chinese)
|
| [10] |
苏进展,方宗德,曹雪梅.成形法加工的弧线齿面齿轮几何接触分析[J].航空动力学报,2010,25(6):1427-1431. SU Jinzhan,FANG Zongde,CAO Xuemei.Tooth contact analysis of face gear drive with curvilinear shaped tooth by format cutting[J].Journal of Aerospace Power,2010,25(6):1427-1431.(in Chinese)
|
| [11] |
苏进展,方宗德,曹雪梅.刀倾法数控加工机床调整参数转换[J].农业机械学报,2009,40(11):223-226. SU Jinzhan,FANG Zongde,CAO Xuemei.NC machine settings transformation for tilt method[J].Transactions of the Chinese Society for Agricultural Machinery,2009,40(11):223-226.(in Chinese)
|
| [12] |
王小椿,吴联银,李彬,等.基于空间运动学的传统机床与Free-Form型机床运动转换方法的研究[J].机械工程学报,2001,37(4):93-98. WANG Xiaochun,WU Lianyin,LI Bin,et al.Study on kinematic transformation from traditional machine tool to Free-Form ones based of spatial kinematics[J].Chinese Journal of Mechanical Engineering,2001,37(4):93-98.(in Chinese)
|
| [13] |
马振群,王小椿.一种高性能重载齿轮的研究[J].西安交通大学学报,2002,36(3):282-286. MA Zhenqun,WANG Xiaochun.Research on a highly durable and heavy duty gearing[J].Journal of Xi'an Jiaotong University,2002,36(3):282-286.(in Chinese)
|
DownLoad: