叶片弦中区内部气膜孔局部换热特性实验

徐磊; 常海萍; 常国强; 张镜洋

叶片弦中区内部气膜孔局部换热特性实验

南京航空航天大学能源与动力学院, 江苏南京 210016

计量
- 文章访问数: 1888
- HTML浏览量: 117
- PDF量: 430
- 被引次数: 0
出版历程
- 收稿日期: 2005-06-25
- 修回日期: 2005-12-10
- 刊出日期: 2006-04-28

Experimental Investigation of the Local Heat Transfer Characteristics at the Inner Side of the Midchord Region near Film Cooling Holes

College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 对叶片弦中区内部有、无冲击射流的气膜出流冷却方式中,冷气侧气膜孔局部换热特性进行了实验研究。无冲击射流时,主要研究了来流雷诺数、气膜出流与横流密流比的变化对气膜孔局部换热特性的影响;研究发现,气膜孔局部的换热均随两者的增加而强化,且孔后的换热要好于孔前的换热,越靠近孔的地方换热越强,并对倾角为30°和90°时气膜孔的“溢流效应”进行了比较。有冲击射流时,改变冲击雷诺数、横流射流密流比等流动参数,通过对数据整理得出了这些参数对其局部换热特性的影响规律。
- 航空、航天推进系统 /
- 涡轮叶片 /
- 气膜冷却 /
- 溢流效应 /
- 局部换热特性
Abstract: Experimental investigation of the turbine blade local heat transfer characteristics at the inner side of the mid-chord region near film holes was conducted,with and without impingement cooling.Under no impingement condition,the investigation was carried out with different crossflow Reynolds Numbers and different density flow ratios of film outflow to cross flow.The research results indicate that the local heat transfer near the film cooling holes is enhanced with the increase of the cross flow Reynolds Numbers and density flow ratios.The local heat transfer characteristics aft the film holes are better than that ahead the film holes.The closer to the holes the stronger heat transfer will be,regardless of ahead or aft the film holes.A comparison of extraction effect between 30° and 90° film cooling holes was conducted also.Under the condition with impingement cooling,through the experimental data,effect of flow parameters such as impinging Reynolds Numbers and density flow ratios on the local heat transfer characteristics were obtained.
- aerospace propulsion system /
- turbine blade /
- film cooling /
- extraction effect /
- local heat transfer characteristics

HTML

参考文献(8)

[1]	Han J C,Srinath Ekkad.Recent Development in Turbine Blade Film Cooling[J].International Journal of Rotating Machinery,2001,7(1):21～40.
[2]	Walters D K,Leylek J H.A Detailed Analysis of Film Cooling Physics:Part Ⅰ -Streamwise Injection With Cylindrical Holes[J].ASME,2000,122:102～112.
[3]	Hollworth B R,Dagan L.Arrays of Impinging Jets with Spent Fluid Removal Through Vent Holes on the Target Surface[J].Journal of Engineering for Power,1980,102:994 ～999.
[4]	陶智,吴宏,蔡毅.气膜出流对叶片各表面换热系数的影响[J].航空动力学报,1997,12(4):413～415.Tao Zhi,Wu Hong,Cai Yi.Effect of Film Cooling on Internal Heat Transfer Coefficients of Blades[J].Journal of Aerospace Power,1997,12 (4):413～415.
[5]	吴宏,邓宏武,陶智.气膜出流对叶片各表面换热系数影响的实验研究和计算[J].航空动力学报,1999,14(3):247～250.Wu Hong,Deng Hongwu,Tao Zhi.Effects of Film Cooling on Internal Heat Transfer Coefficients of a Square Channel[J].Journal of Aerospace Power,1999,14(3):247～250.
[6]	吴宏,陶智,徐国强,丁水汀.带气膜出流的旋转叶片冲击冷却的实验研究[J].航空动力学报,2000,15(4):375～380.Wu Hong,Tao Zhi,Xu Guoqiang,Ding Shuiting.Experiments of Impinging Cooling in Leading Edge of Rotating Blades with Outflow Film[J].Journal of Aerospace Power,2000,15 (4):375～380.
[7]	张净玉,常海萍.稀疏型气膜出流内部冷气侧换热特性实验研究[J].航空动力学报,2003,18(4):502～506.Zhang Jingyu,Chang Haiping.The Interior Heat Transfer Characteristics of Gas Turbine Blade Due to Sparse Film Cooling Holes[J].Journal of Aerospace Power,2003,18 (4):502～506.
[8]	李朝晖,李立国.叶片前缘有气膜孔的冲击冷却研究[J].南京航空航天大学学报,1993,25(4):457～463.Li Zhaohui,Li Liguo.Impingement Cooling with Film Coolant Extraction in the Airfoil Leading Edge Regions[J].Journal of Nanjing University of Aeronautics and Astronautics,1993,25 (4):457～ 463.