加热板上蒸发液滴动态特性的实验

王晓东; 陆规; 彭晓峰; 张欣欣; 王补宣

加热板上蒸发液滴动态特性的实验

1.
北京科技大学机械工程学院, 北京 100083
2.
清华大学相变与界面传递现象实验室, 北京 100084

基金项目: 国家自然科学基金资助项目(No.50406001)

计量
- 文章访问数: 1711
- HTML浏览量: 67
- PDF量: 490
- 被引次数: 0
出版历程
- 收稿日期: 2005-10-08
- 修回日期: 2005-12-24
- 刊出日期: 2006-12-28

Experimental investigation of dynamic evaporation characteristics of liquid droplet on heated surface

2.
Lab of Phase-change and Interfacial Transport Phenomena, Tsinghua University, Beijing 100084, China

摘要

摘要: 采用高速摄像技术可视化观察5μl小液滴在铜、铝和不锈钢表面上的蒸发与核化过程,板温50¹12℃。实验测量了液滴高度、湿润半径和接触角随时间的动态演化。板温低于100℃时蒸发处于自由界面蒸发模态,过程可分为两阶段,第一阶段液滴高度和接触角连续降低,湿润半径仅比初始值略有降低;第二阶段后退角恒定,湿润半径迅速降低至零。板温高于100℃时处于核态沸腾模态,液滴内部核化及气泡动力学过程强烈依赖壁面过热度。自由界面蒸发模态和核态沸腾模态,壁面平均热流与壁温均呈线性关系,斜率的不同反映两种模态换热机制的差别。
- 航空、航天推进系统 /
- 液滴 /
- 蒸发 /
- 核化 /
- 湿润 /
- 接触角
Abstract: Using high-speed video imaging system,the evaporation and nucleation of 5ml water droplet on copper,aluminum and stainless steel plates with temperature from 50℃ up to 112℃ were observed.The time-dependent height,wetting radius and contact angle of the droplet were measured.In film evaporation regime,the evaporation process could be divided into two stages.In the fist stage,the height and contact angle of the droplet continuously decrease,but the wetting radius of the droplet hardly alters.In the second stage,the contact angle remains constant as the preceding one,and the wetting radius rapidly approaches zero.In nucleate boiling regime,the nucleation and dynamics of the bubbles inside the droplet are strongly dependent on the surface superheat.It was found that the linear relationship between the mean heat flux of the surfaces and the temperature of the heated surfaces holds true for both regimes,and their different slopes indicate their different heat transfer mechanism.
- aerospace propulsion system /
- liquid droplet /
- evaporation /
- nucleation /
- wetting /
- contact angle

HTML

参考文献(19)

[1]	Tamura Z,Tanasawa Y.Evaporation and combustion of a drop contacting with a hot surface[R].Seventh International Symposium on Combustion,1959:509-522.
[2]	Bonacina C,Del Giudice S,Comini G.Dropwise evaporation[J].ASME Journal of Heat Transfer,1979,101:441-446.
[3]	Toda S.A study of mist cooling,fist report:investigation of mist cooling[J].Heat Transfer Japanese Researches,1972,1:39-50.
[4]	Ruiz O E,Black W Z.Evaporation of water droplets placed on a heated horizontal surface[J].ASME Journal of Heat Transfer,2002,124:854-863.
[5]	di Marzo M,Evans D.Dropwise evaporative cooling of high Thermal conductivity materials[J].International Journal of Heat and Technology,1987,5:126-136.
[6]	Sadhal S S,Plesset M S.Effect of solid properties and contact angle in dropwise condensation and evaporation[J].ASME Journal of Heat Transfer,1979,101:48-54.
[7]	Choi K J,Yao S C.Mechanisms of film boiling heat transfer of normally impacting spray[J].International Journal of Heat and Mass Transfer,1987,30:311-318.
[8]	Chen J C,Hsu K K.Heat transfer during liquid contact on superheated surfaces[J].ASME Journal of Heat Transfer,1995,117:693-697.
[9]	Bernardin J D,Stebbins C J,Mudawar I.Effect of surface roughness on water droplet impact history and heat transfer regimes[J].International Journal of Heat and Mass Transfer,1997,40:73-88.
[10]	Xiong T Y,Yuen M C.Evaporation of a liquid droplet on a hot plate[J].International Journal of Heat and Mass Transfer,1991,34:1 881-1 894.
[11]	Yang J,Chow L C,Pais M R.Nucleate boiling heat transfer in spray cooling[J].ASME Journal of Heat Transfer,1996,118:668-671.
[12]	Qiao Y M,Chandra S.Spray cooling enhancement by addition of surfactant[J].ASME Journal of eat Transfer,1998,120:92-98.
[13]	Tartarini P,Lorenzini G,Randi M R.Experimental study of water droplet boiling on hot,non-porous surfaces[J].Heat and Mass Transfer,1999,34:437-447.
[14]	Cui Q,Chandra S,McCahan S.The effect of dissolving gases or solids in water droplets boiling on a hot surface[J].ASME Journal of Heat Transfer,2001,123:719-728.
[15]	Seki M,Kawamura H,Sanokawa K.Transient temperature profile of a hot wall due to an impinging liquid droplet[J].ASME Journal of Heat Transfer,1978,100:167-169.
[16]	林志勇,王晓东,彭晓峰.外形分析-拟合求导法测接触角[J].工程热物理学报,2005,26(5):847-849.Lin Zhi-yong,Wang Xiao-dong,Peng Xiao-feng.Contact angle measurement with shape fit-differential method[J].Journal of Engineering Thermophysics,2005,26(5):847-849.
[17]	Wang Xiao-dong,Peng Xiao-feng,Wang B X.Contact angle hysteresis and hysteresis tension on rough solid surfaces[J].Chinese Journal of Chemical Engineering,2004,12:615-621.
[18]	Wang Xiao-dong,Peng Xiao-feng,Lee D J.Dynamic wetting and stress singularity on the contact line[J].Science in China Series E,2003,46:407-417.
[19]	Chandra S,di Marzo M,Qiao Y M,et al.Effect of liquid solid contact angle on droplet evaporation[J].Journal of Fire Safety,1996,27:141-158.