高温合金焊接接头应力分析与疲劳寿命预测

罗刚; 范引鹤; 梁尤疆

高温合金焊接接头应力分析与疲劳寿命预测

1.
南京航空航天大学能源与动力学院, 南京 210016
2.
沈阳航空发动机设计研究所, 沈阳 110015

计量
- 文章访问数: 2049
- HTML浏览量: 314
- PDF量: 485
- 被引次数: 0
出版历程
- 收稿日期: 2005-12-23
- 修回日期: 2006-05-12
- 刊出日期: 2007-02-28

Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints

1.
College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2.
Shenyang Aeroengine Design and Research Institute, Shenyang 110015, China

摘要

摘要: 针对航空喷气发动机机匣上安装座的焊接结构, 建立了对接焊、错位对接焊、不等厚对接焊、新材料对接焊等4种焊接结构的有限元分析模型, 利用ANSYS软件进行了应力分析, 得到了4种焊接接头的应力集中系数;用“成组对比实验方法”进行了上述4种焊接结构的应力疲劳试验验证, 预测了它们的寿命区间.疲劳试件的扫描电镜(SEM)断口分析表明, 应力集中区域的焊接缺陷是影响疲劳寿命最主要的因素.
- 航空、航天推进系统 /
- 高温合金 /
- 焊接接头 /
- 有限元 /
- 应力集中系数 /
- 疲劳
Abstract: In accordance with the welded structures on the mount-box of jet engine case,the finate element model(FEM) models of four kinds of welded joints including normal butt welding,dislocation butt welding,non-isopachous butt welding and new material butt welding are established.Stress analysis of these butt welding's is carried out by means of the finite element analysis software ANSYS,and the stress-concentration-coefficient of the four welded joints is obtained.The stress fatigue tests are implemented on the four kinds of butt welding pieces.The experimental results are analyzed and compared using the method of group comparison,and the fatigue life for the four kinds of butt welding is predicted.The result of the scanning electron microscope(SEM) fracture analysis indicated that the defection in the stress-concentrated area is the dominant factor to affect the fatigue life of the weld-joint.
- aerospace propulsion system /
- super-alloy /
- weld joint /
- finite element /
- stress-concentration-coefficient /
- fatigue

HTML

参考文献(11)

[1]	范引鹤,丁磊,阮米庆,等.GH150合金钢缝焊接头的疲劳寿命研究[J].南京航空航天大学学报,1996,28(5):638-643.FAN Yinhe,DING Lei,RUAN Miqing,et al.Study on fatigue life of seam-welded joints in alloy GH150[J].Journal of Nanjing University of Aeronautics and Astronautics,1996,28(5):638-643.
[2]	阮米庆,范引鹤.高温合金GH150氩弧焊接接头的组织和力学性能[J].特殊钢,1996,17(4):19-22.RUAN Miqing,FAN Yinhe.Microstructure and mechanical properties of argon arc welding joint of superalloy GH150[J].Special Steels,1996,17(4):19-22.
[3]	[英]格尔内T R著.焊接结构的疲劳[M].北京:机械工业出版社,1988.
[4]	吴富民.结构疲劳强度[M].西安:西北工业大学出版社,1985.
[5]	师昌绪.中国高温合金四十年[J].金属学报,1997,33(1):1-8.SHI Changxu.Forty years of superalloy R & D in China[J].Acta Metallurgica Sinica,1997,33(1):1-8.
[6]	王国强.实用工程数值模拟技术及其在ANSYS上的实践[M].西安:西北工业大学出版社,1999.
[7]	高德平.机械工程中的有限元法基础[M].西安:西北工业大学出版社,1995.
[8]	赵少汴,王忠保.抗疲劳设计[M].北京:机械工业出版社,1997.
[9]	盛骤,谢式千,潘承毅.概率论与数理统计[M].北京:高等教育出版社,1979.
[10]	高镇同.疲劳应用统计学[M].北京:国防工业出版社,1986.
[11]	罗新民,陈康敏,罗刚,等.高温合金焊接接头动态拉伸变形断裂行为[J].焊接学报,2005,26(4):60-64.LUO Xinmin,CHEN Kangmin,LUO Gang,et al.Deformation and fracture behaviors of superalloy welded joint upon scanning electron microscope in situ tension[J].Transactions of the China Welding Institution,2005,26(4):60-64.