冲击-发散冷却火焰筒浮动瓦片三维壁温计算分析

李彬; 吉洪湖; 江义军

冲击-发散冷却火焰筒浮动瓦片三维壁温计算分析

1.
南京航空航天大学能源与动力学院, 南京 210016
2.
中国燃气涡轮研究院, 成都 610500

计量
- 文章访问数: 1843
- HTML浏览量: 262
- PDF量: 452
- 被引次数: 0
出版历程
- 收稿日期: 2006-02-20
- 修回日期: 2006-10-27
- 刊出日期: 2007-03-28

Numerical analysis of 3D temperature field of an impingement-effusion cooled flame tube floating tile

1.
College of Energy and Power Engineering, Nanjing U niversity of Aeronautics, Nanjing 210016, China
2.
China Gas Turbine Establishment, Chengdu 610500, China

摘要

摘要: 论述了采用冲击-发散冷却技术的火焰筒浮动瓦片的传热计算分析方法, 以及传热数学模型和边界条件处理.并采用ANSYS程序的热分析模块对浮动瓦片的三维壁温场进行了计算.计算结果与试验结果进行了对比分析, 两者有较好的吻合性, 计算值与试验值的相对误差不大于6%.
- 航空、航天推进系统 /
- 火焰筒 /
- 浮动瓦片 /
- 冲击冷却 /
- 发散冷却 /
- 有限元法
Abstract: Heat transfer numerical analysis methods,maths model,and boundary condition treatment for an impingement-effusion cooled flame tube floating tile are discussed in the paper.By using the heat analysis module of ANSYS code,the 3D temperature field of the floating tile was calculated.The numerical results showed that the agreement with the test data is fairly good.The relative error between numerical results and test data is not greater than 6%.
- aerospace propulsion system /
- flame tube /
- floating tile /
- impingement cooling /
- effusion cooling /
- finite element

HTML

参考文献(14)

[1]	Meller A M.Design of modern turbine combustors[M].New York:Academic Press Inc.,1990.
[2]	Mereno V.Combustor liner durability analysis,final report (Prat and Whitney Aircraft Group)[R].NASA-CR-165250,1981.
[3]	赵清杰,李彬.浮动瓦片冷却结构在燃烧室中的应用和发展[J].燃气涡轮试验与研究,2001,14(1):10-13.ZHAO Qingjie,LI Bin.Application and development of floating panel cooling structure in combustors[J].Gas Turbine Experiment and Research,2001,14(1):10-13.
[4]	Holman J P.Heat transfer[M].New York:McGraw-Hill Book Company,1976.
[5]	Lefebvre A H.Gas turbine combustion[M].New York:Hemisphere Publishing Corporation,1983.
[6]	Gleason C C,Ollen T L,Shayeson M W,et al.Evaluation of fuel character effects on F101 engine combustion system[R].AD-A077860,1979.
[7]	韩振兴,朱谷君,冀守礼,等.气膜冷却燃烧室火焰筒二维壁温分布计算[J].航空动力学报,1995,10(1):83-86.HAN Zhenxing,ZHU Gujun,JI Shouli,et al.Film cooling combustor tube 2D wall temperature distribution calculations[J].Journal of Aerospace Power,1995,10(1):83-86.
[8]	董志锐,周四平,王舟山,等.复杂边界条件下的多层多孔壁温度场的计算模型[J].航空学报,1999,20(5):405-408.DONG Zhiriu,ZHOU Siping,WANG Zhoushan,et al.Calculating model for temperature field of multi-layer and multi-hole wall under complex boundary conditions[J].Acta Aeronautics et Astronautica Sinica,1999,20(5):405-408.
[9]	陶文铨.数值传热学[M].第2版.西安:西安交通大学出版社,2001.
[10]	Hallquist J O.ANSYS release 5.7.1-thermal analysis guide[M].ANSYS Inc.,1998.
[11]	俞文利,林宇震,刘高恩.冲击加多斜孔双层壁冷却方式多斜孔内换热研究[J].航空动力学报,2001,16(4):365-369.YU Wenli,LING Yuzhen,LIU Gaoen.Investigation of heat transfer inside inclined multihole in the impingent inclined multihole double wall[J].Journal of Aerospace Power,2001,16(4):365-369.
[12]	Andrews G E,Tehrani F B.Small diameter film cooling hole heat transfer:the influence of the number of holes[R].ASME89-GT-7,1989.
[13]	Andrews G E,Asere A A.Transpiration and impingement/effusion cooling of gas turbine combustion chambers[R].ISABE 85-7005,1985.
[14]	《中国航空材料手册》编辑委员会.中国航空材料手册[M].北京:中国标准出版社,2002.