叶片弯曲对不同折转角扩压叶栅冲角特性影响

陈绍文; 陈浮; 冯冬民; 王仲奇

叶片弯曲对不同折转角扩压叶栅冲角特性影响

哈尔滨工业大学能源科学与工程学院, 哈尔滨 150001

基金项目: 国家自然科学基金项目(50236020)资助

计量
- 文章访问数: 1658
- HTML浏览量: 199
- PDF量: 444
- 被引次数: 0
出版历程
- 收稿日期: 2006-03-17
- 修回日期: 2006-07-10
- 刊出日期: 2007-03-28

Effects of blade curved on compressor cascades with different camber angles under different incidences

School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

摘要

摘要: 实验在低速环形风洞上研究了冲角变化对不同弯曲角度、不同叶型折转角扩压叶栅气动性能的影响.结果表明, 随着叶型折转角的增大, 正弯叶栅变冲角性能的最佳弯角范围逐渐缩小, 大折转角正弯叶栅的气动性能受冲角变化的影响要大于小折转角叶栅正弯叶栅;在正冲角下, 60°叶型折转角正弯叶栅性能对弯角变化十分敏感, 此时不宜采用超过15°弯角的正弯叶栅.
- 航空、航天推进系统 /
- 叶栅实验 /
- 弯曲叶片 /
- 冲角 /
- 叶型折转角
Abstract: The experimental investigation of the effects of changing incidences on the aerodynamic performance of compressor cascades with different curved angles and camber angles in a low-speed annular wind tunnel were carried out.Experimental results show that with the increase of camber angle,the choice range of curve height correspond to the best performance in different incidences become narrower.The effects of incidence angles on the aerodynamic performance of positive curved cascades with large camber angle are more evident contrast to with small camber angle.The performance of positive curved cascades with 60°camber angle is so sensitive to the curved angle changing at higher incidence angles,so that a positive curved cascades with larger curved angles than 15°is inadvisable.
- aerospace propulsion system /
- cascade experiment /
- curved blade /
- incidence /
- camber angle

HTML

参考文献(7)

[1]	钟兢军,苏杰先,王仲奇.压气机叶栅壁面拓扑和二次流结构分析[J].工程热物理学报,1998,19(1):40-44.ZHONG Jingjun,SU Jiexian,WANG Zhongqi.Analysis of topological and secondary flow structure in compressor cascade[J].Journal of Engineering Thermophysics,1998,19(1):40-44.
[2]	SHANG Erbing,WANG Zhongqi,SU Jiexian.The experimental investigations on the compressor cascades with leaned and curved blade[R].1993,ASME Paper,93-GT-50.
[3]	WANG Zhongqi,SU Jiexian,ZHANG Jingjun.The effect of the pressure distribution in a three-dimensional flow field of a cascade on the type of curved blade[R].ASME Paper,94-GT-189.
[4]	Sasaki T,Breugelmans F A E.Comparison of sweep and dihedral effects on compressor cascade performance[J].Journal of Turbomachinery,1998,120(2):454-464.
[5]	WANG Zhongqi,XU Wenyuan,HAN Wanjin.An experimental investigation into the influence of the blade leaning on the secondary flow in an annular cascades with small diameter-length ratio[R].ASME Paper,No.85-WAM-1485.
[6]	王会社,钟兢军,王仲奇.CDA叶片正弯曲对压气机叶栅性能影响的实验研究[J].推进技术,2002,23(4):321-324.WANG Huishe,ZHONG Jingjun,WANG Zhongqi.Effects of blade positive curving on aerodynamic performance of compressor cascades[J].Journal of Propulsion Technology,2002,23(4):321-324.
[7]	陈浮,陈绍文,赵桂杰,等.不同折转角弯曲扩压叶栅性能数值研究及优化设计[J].热能动力工程,2005,20(3):258-261.CHEN Fu,CHEN Shaowen,ZHAO Guijie,et al.Numerical investigation and optimized design of the performance of curved diffuser cascades with different turning angles[J].Journal of Engineering for Thermal Energy and Power,2005,20(3):258-261.