尾缘吹气稳定器燃烧性能的数值分析

Numerical analysis of combustion performance of EBMC flame holder

School of Jet Propulsion, Beijing University of Aeronauticsand Astronautics, Beijing 100083, China

摘要: 为了验证尾缘吹气火焰稳定器在更宽工作范围内的燃烧性能,对其燃烧过程进行了数值模拟.分析了在更宽的应用条件下不同尾缘射流速度、尾缘射流当量比及来流速度等因素对燃烧效率的影响;并与常规V形稳定器的燃烧性能进行了对比,获得了更宽工作范围内上述因素对吹气稳定器性能的影响规律.与较窄范围内的相应实验规律进行了对比,结果表明,以上因素对燃烧性能的影响趋势大致相同,但某些方面存在差异.
- 航空、航天推进系统 /
- 尾缘吹气稳定器 /
- 燃烧性能 /
- 加力燃烧室
Abstract: In order to verify the combustion performance of EBMC flame holder in wider operating range, numerical simulation of the combustion process was carried out.The influence of the jet velocity, jet equivalence ratio and the approach velocity on combustion efficiency was analyzed, meanwhile the simulated results were compared with combustion performance of common V-shaped stabilizer, showing the influence of above-specified factors on the combustion performance of flame holder.On a comparative basis, the results show that the influence of such variables on combustion performance corresponds almost to earlier experimental results in narrower operating range, despite of some differences in some aspects.
- aerospace propulsion system /
- EBMC(edge blowing mixture curtain) flame holder /
- combustion performance /
- afterburner

[1]	Perk R E,Samuelsen G S.Generalized stability criteria for an opposed-jet flameholder[R].AIAA 82-4229,1982.
[2]	Sridhara K,Chidananda M S,Paranjpe P A.Jet curtain flameholder for aircraft afterburners[R].78-GT-95.
[3]	Sridhara K,Chidananda M S.Fresh mixture entertainment in a jet curtain flameholder[R].Fifth International Symposium on Airbreathing Engines,Bangalove,India:February,1981.
[4]	杨茂林,全中,白兴艳,等.尾缘吹气式火焰稳定器试验研究[J].航空动力学报,1998,13(2):185-188.YANG Maolin,QUAN Zhong,BAI Xingyan,et al.Experimental investigation on EBMC flameholder[J].Journal of Aerospace Power,1998,13(2):185-188.
[5]	岳连捷,熊建秋,樊维均,等.尾缘吹气式火焰稳定器燃烧性能研究[J].航空动力学报,2001,16(4):345-349.YUE Lianjie,XIONG Jianqiu,FAN Weijun,et al.Research on combustion performance of the edge blowing mixture curtain flameholder[J].Journal of Aerospace Power,2001,16(4):345-349.