叶尖泄漏掺混损失影响因素分析
Analysis of influential factors to tip leakage mixing loss
-
摘要: 借鉴Denton不可压叶尖泄漏损失的理论分析,推导出可压缩流动中叶尖泄漏掺混损失基本关系式,其集中反映了尖区叶表压强、叶尖间隙、泄漏流流量系数及总损失系数影响.在仅考虑泄漏掺混损失情况下,数值分析了叶尖基元负荷、间隙、泄漏流量系数整体水平及其弦向分布等因素对叶尖泄漏掺混损失的影响.结果展示了各因素对叶尖泄漏掺混损失的作用及机理.最后提出一个重要的组合参数,反映了叶片尖部载荷和叶尖间隙的流向分布对叶尖泄漏掺混损失的综合影响.Abstract: A basic relational model for tip leakage mixing loss of unshrouded blades for compressible flow was derived from theoretical analysis of Denton.Relationship.It reflected the influential factors such as blade surface static pressure, chordwise distribution of tip clearance, discharge coefficient and total pressure loss coefficient in the tip region.While only the mixing loss of tip leakage was considered, numerical analysis was performed for the influence of basic load of tip, clearance, average level and chordwise distribution upon mixing loss.The results clearly indicate the governing actions and mechanisms of various factors against the tip leakage mixing loss.Finally, an important combination parameter was put forward to reflect the overall influence of blade loading and tip clearance distribution on the tip leakage mixing loss.
-
Key words:
- aerospace propulsion system /
- turbomachinery /
- fan/compressor /
- turbine /
- tip leakage /
- compressible flow /
- mixing loss
-
[1] Schaub U W,Vlasic E,Moustapha S H.Effect of tip clearance on the performance of a highly loaded turbine stage[R].AGARD-CP-537,1993. [2] Smith G D J,Cumpsty N A.Flow phenomena in compressor casing treatment[J].ASME Journal of Engineering for Gas Turbines and Power,1984,106(3):532-541. [3] Wisler D C.Loss reduction in axial flow compressors through low-speed model testing[J].ASME Journal of Turbomachinery,1985,107(2):354-363. [4] Booth T C.Importance of tip clearance flows in turbine design[C]∥Tip Clearance Effects in Axial Turbomachines.VKI Lectures Series 1985-05. [5] Bindon J P.The measurement and formation of tip clearance loss[J].ASME Journal of Turbomachinery,1989,111(2):257-263. [6] Lakshminarayana B,Horlock J.Secondary and leakage flow in turbomachines[J].Int.J.of Mechanical Sciences,1963,5(1):287-307. [7] Denton J D.Loss mechanisms in turbomachines[J].ASME Journal of Turbomachinery,1993,115(3):621-656. [8] Betz A.Hydraulische probleme[R].V.D.I.Verlag,1926. [9] Storer J A,Cumpsty N A.Tip leakage flow in axial compressors[J].ASME Journal of Turbomachinery,1991,113(2):252-259. [10] Rains D A.Tip clearance flows in axial flow compressors and pumps[R].California Institute of Technology Hydrodynamics Laboratory Report 5,1954. [11] Storer J A.Tip clearance flow in axial compressors[D].Ph.D Thesis,Cambridge University,1991.
点击查看大图
计量
- 文章访问数: 1496
- HTML浏览量: 2
- PDF量: 477
- 被引次数: 0