高速球轴承打滑的临界负荷研究

崔立; 王黎钦; 郑德志; 古乐

高速球轴承打滑的临界负荷研究

哈尔滨工业大学机电工程学院, 哈尔滨 150001

基金项目: 国家自然科学基金(50575054)

计量
- 文章访问数: 1378
- HTML浏览量: 6
- PDF量: 464
- 被引次数: 0
出版历程
- 收稿日期: 2006-10-27
- 修回日期: 2006-12-25
- 刊出日期: 2007-11-28

Study on critical load of skidding in high speed ball bearing

School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China

摘要

摘要: 对高速球轴承滚动体受力分析,得出其打滑机理.建立轴承零件相互位置关系模型确定了各零件的理论转速.用拟静力学和拟动力学结合的方法计算承受联合负荷球轴承的临界轴向负荷.以27927NK1W1(H)航空轴承为算例,研究了承受不同载荷的临界负荷.结果表明径向载荷对临界负荷值的影响较大;当保持架转速明显趋于平稳且承载滚动体不发生打滑时,得到承受联合负荷轴承的临界负荷.用Gupta的典型算例和Poplowski的试验结果对该方法的可靠性进行了验证.
- 航空、航天推进系统 /
- 高速球轴承 /
- 联合负荷 /
- 打滑 /
- 临界轴向负荷
Abstract: The skidding principle for high-speed ball bearing was obtained from the stress analysis of rolling body.The theoretical rotary speed of various components was determined through interaction modeling of bearing elements.And,the critical load of combined loaded bearing was calculated by combining quasi-static and quasi-dynamic analysis methods.Take 276927NK1W1(H) bearing,for example, the critical load under different loads was studied.The results show that,radial load has greater influence on critical load;the critical load of combined loaded bearing can be obtained when rotary speed of cage becomes steady obviously and no skidding occurs on the surface of loaded rolling elements.Finally,the reliability of this method was verified by the computation example of Gupta and test result of Poplowski.
- aerospace propulsion system /
- high speed ball bearing /
- combined load /
- skidding /
- critical axial load

HTML

参考文献(12)

[1]	Tauqir A.Causes of fatigue failure in the main bearing of an aero-engine[J].Engineering Failure Analysis,2000,7:127-143.
[2]	Boness R.J.Load requirement for the prevention of skidding in high speed thrust loaded ball bearings[J].Trans of ASME,Journal of Lubrication Technology,1981,103:35-39.
[3]	Harris T A.Rolling bearing analysis[M].3rd ed.New York:John Wiley and Sons,Inc.1990.
[4]	Gupta P K.Advanced dynamics of rolling elements[M].New York:Springer-Verlag,1984.
[5]	Meeks C R.Ball bearing dynamic analysis using computer methods[J].Trans of ASME,1996,118:52-58.
[6]	Cermelj P,Boltezar M.An indirect approach to investigating the dynamics of a structure containing ball bearings[J].Journal of Sound and Vibration,2004,276:401-417.
[7]	李锦标,吴林丰.高速滚子轴承的动力学分析[J].航空学报,1992,13(12):B625-B632.LI Jinbiao,WU Linfeng.Dynamic analysis of high-speed rolling bearings[J].Acta Aeronautica et Astronautica Sinica,1992,13(12):B625-B632.
[8]	罗祝三,吴林丰,孙心德.轴向受载的高速球轴承的拟动力学分析[J].航空动力学报,1996,11(3):257-260.LUO Zhusan,WU Linfeng,SUN Xinde.Qusai-dynamic analysis of high speed thrust ball bearings[J].Journal of Aerospace Power,1996,11(3):257-260.
[9]	蒋兴奇,马家驹,顾小兵.主轴轴承最小预负荷的计算[J].轴承,2001,3:1-4.JIANG Xinqi,MA Jiaju,GU Xiaobing.Calculaion of minimum preload of spindle bearing[J].Bearing,2001,3:1-4.
[10]	Neng Tung Liao,Jen Fin lin.Ball bearing skidding under radial and axial loads[J].Mechanism and Machine Theory,2002,37:91-113.
[11]	王燕霜,杨伯原,王黎钦.4106航空润滑油拖动特性研究[J].摩擦学学报,2004,24(2):156-159.WANG Yanshuang,YANG Boyuan,WANG Liqin.Traction behavior of 4106 aviation lubricating oil[J].Tribology,2004,24(2):156-159.
[12]	Wang Y S,Yang B Y,Wang L Q.Investigation into the traction coefficient in elastohydrodynamic lubrication[J].Tribotest,2004,12,11(2):113-124.