过热蒸汽射流冷却叶片热耦合数值模拟
Numerical simulation of jet impingement cooling of turbine steam-cooling vane
-
摘要: 在对射流冷却平板模型和射流冷却凹板模型数值模拟的基础上,设计了射流冲击冷却式蒸汽冷却叶片,并对其进行了热耦合数值模拟.通过改变平板和凹板的进口雷诺数,射流孔与靶板间距和凹板曲率,对靶板的冷却传热进行了对比研究,得到传热量与各个参数的变化规律.然后根据上面得到的变化规律设计出射流冲击冷却式蒸汽冷却叶片,应用ANSYS CFX 10.0数值程序,对冲击冷却的流动和传热过程进行了三维热耦合数值模拟,得到叶片表面温度和对流换热系数分布.Abstract: The present study numerically investigated a conceptual type of internal steam cooling vane with the impingement cooling technology on the basis of plane model and concave model.By changing the inlet Re,distance between the jet and target board and curvature of concave board,a series of temperature value and heat transfer coefficient are obtained.Based on these Results,an impingement cooling vane was designed,which worked on the ANSYSworkbench,and the conjugated heat transfer was studied by means of ANSYS CFX Navier-Stokes code using k-ε two-equation turbulence model for gas field and cooling field.The numerical results of the effects of cooling flow heat transfer in the vane were obtained to evaluate the damage of the vane during steady state operation conditions.
-
Key words:
- steam cooling /
- impingement cooling /
- gas turbine /
- numerical simulation /
- conjugate heat transfer
-
[1] 杨凡,郑洪涛,李智明.前缘气膜孔对涡轮静叶冷却效果影响的数值模拟[J].热能动力工程,2006(4):345-349.YANG Fan,ZHANG Hongtao,LI Zhiming.Numerical simulation of the impact of leading-edge gas-film pores on cooling effectiveness in turbine stator blades[J].Journal of Engineering for Thermal Energy and Power,2006,21(4):345-349. [2] 杨凡,曹辉,郑洪涛,等.涡轮静叶前缘气膜冷却数值模拟[J].汽轮机技术,2006,48(4):269-271.YANG Fan,CAO Hui,ZHENG Hongtao et al.Numerical simulation of leading edge film-cooling of turbine stator blades.[J].Turbine Technology,2006,48(4):269-271. [3] 董瑜,郑洪涛,杨凡.蒸汽冷却叶片耦合传热的数值模拟[C]//中国航空学会第6届动力年会论文集.南京:中国航空学会动力专业分会,2006. [4] 韩介勤,桑地普·杜达,斯瑞纳斯·艾卡德.燃气轮机传热和冷却技术[M].西安:西安交通大学出版社.2005. [5] Revet P B,Dejeu C,Dorignae E,et al.Heat transfer to a row of impinging jets in consideration of optimization[J].Int.J.Heat and Mass Transfer,2002,45:4191-4200. [6] Cornaro C,Fleischer A S,Rounds M,et al.Jet impingement cooling of a convex semi-cylindrical surface[J].Int.J.Therm.Sci.,2001,40:890-898. [7] Bohn D E,Becker V J,KusteRer K A,3D conjugate flow and heat transfer calculations of a film-cooled turbine guide vane at different operation conditions[R].ASME Paper 97-GT-23,1997. [8] Takayashi T,Watanabe K.Thermal conjugate analysis of a first stage blade in a gas turbine[R].ASME Paper 2000-GT-251,2000.
点击查看大图
计量
- 文章访问数: 1442
- HTML浏览量: 1
- PDF量: 397
- 被引次数: 0