径流与斜流涡轮设计的通流反问题方法
A through flow inverse design approach for radial and mixed-flow turbines
-
摘要: 自主发展了径流及斜流涡轮的准三维流线曲率法通流设计程序,应用该程序给出了一项500 N推力级微型涡喷发动机斜流涡轮的气动设计和叶片造型.通过计算流体力学检验和整体叶轮强度检验,该微型斜流涡轮超过了预定的设计指标.为实现径流涡轮和斜流涡轮设计反问题的统一,流线曲率法的S2,m流面准径向平衡方程是沿流线方向m和流线的准法线方向口写出,该系统也可用于轴流涡轮的设计.采用了在所有计算站上的"全可控涡法"进行气动设计.Abstract: Acode of quasi-3D streamline curvature was developed through flow method for the inverse design of radial and mixed-flow turbines.This code was used to design a single stage mixed-flow type turbine which served as the turbine of a micro-turbojet engine with a thrust of 500 N.By computational fluid dynamics examination of the turbine stage and intensity evaluation of the blisk,it is proved that the micro-turbine design has achieved all its design goals.To realize consolidation of design schemes for centripetal-,centrifugal-and mixed-flow turbines,S2,m streamline curvature equilibrium equation was written along the directions of both the streamline 'm' and the streamline's quasi-normal-line 'q'.Thus this scheme can also be used in the design of axialflow turbine.The through flow design code utilized the 'whole controllable vortex' method in all computation stations.
-
[1] Glassman A J.Turbine design and application concept[R].NASA SP-290,1975. [2] Rodgers C.Advanced radial inflow turbine rotor program design and dynamic testing[R].NASA CR-135080,Sept.1976. [3] 王琦,单鹏.径流及斜流压气机任意曲面叶型长短叶片的造型设计方法[J].航空动力学报,2006,21(5):785-791.WANG Qi,SHAN Peng.Design of radial flow and mixed flow compressor rotor splitter-blades[J].Journal of Aerospace Power,2006,21(5),785-791. [4] WU Chunghua.A General theory of three-dimensional flow in subsonic or supersonic turbomachines of axial-,radial-and mixed-flow types F R].Lewis Flight PropulsionLaboratory,NACA Technical Note 2604,January,1952. [5] 王尚锦.离心压气机三元流动理论及应用[M].西安:西安交通大学出版社,1991.
点击查看大图
计量
- 文章访问数: 1499
- HTML浏览量: 1
- PDF量: 518
- 被引次数: 0