利用红外技术进行层板冷却特性实验研究

马龙; 王建华; 吴向宇; 杜治能

利用红外技术进行层板冷却特性实验研究

1.
中国科学技术大学热科学及能源工程系, 合肥 230027
2.
中国航空工业第一集团公司沈阳发动机设计研究所, 沈阳 110015

基金项目: 国家自然科学基金重大研究计划(90305006);国家安全基础研究973项目子课题

计量
- 文章访问数: 1522
- HTML浏览量: 1
- PDF量: 491
- 被引次数: 0
出版历程
- 收稿日期: 2007-04-11
- 修回日期: 2007-06-18
- 刊出日期: 2008-04-28

Experimental Investigation of the cooling performance of lamilloy using infrared thermal imaging technique

1.
Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei, 230027, China
2.
Shenyang Aeroengine Research Institute, China Aviation Industry Corporation I, Shenyang 110015, China

摘要

摘要: 为了研究层板冷却特性,应用远红外热像测温技术,对一个真实尺寸的层板结构进行了实验.层板的气膜孔、绕流柱及冲击孔直径分别为0.,0.8,0.8 mm,内腔高及总板厚分别为0.8,2.6 mm,孔柱数比为1:4:1.为了准确测量表面温度,采用了高精度热电偶校正法,建立修正关系;为了描述层板综合冷却效率,采用热像数字信号运算法,直接进行数据处理.实验在高温亚声速风洞中进行,实验结果展示了冷却介质注射量对层板冷却特性的影响,证明远红外热像技术用来研究层板冷却特性是一种有效的方法.
- 航空、航天推进系统 /
- 层板结构 /
- 综合冷却效率 /
- 红外热像技术 /
- 图形信号处理
Abstract: To investigate the cooling performance of laminated configuration,an infrared thermal imaging technique was used in the experiments with true size configuration.The diameters of film hole,columniation and impingement hole were 0.5,0.8 and 0.8mm respectively,the chamber height and total thickness of the configuration were 0.8 and 2.6mm respectively,the ratio of the hole and culmination was 1∶4∶1.To measure surface temperature exactly,a thermocouple with high accuracy was used,and a correction relationship was established.To describe the integral cooling effect,an algorithm of thermal imaging signal was used for processing image digital signal.The experiments were carried out at a hot gas wind tunnel,and the results present the influence of coolant injection rate on the cooling performance of the laminated configuration.It is demonstrated that the infrared thermal imaging technique is effective method to study cooling performance of laminated configurations.
- aerospace propulsion system /
- laminated configuration /
- overall cooling effectiveness /
- infrared thermal imaging technique /
- image signal processing

HTML

参考文献(12)

[1]	全栋梁,郁新华,刘松龄,等.层板冷却结构流阻特性的实验与数值模拟[J].推进技术,2003,24(5):425-428.QUAN Dongliang,YU Xinhua,LIU Songlin,et al.Experimental and numerical investigation of internal-flow resistance characteristics in laminate porous plates[J].Journal of Propulsion Technology,2003,24(5):425-428.
[2]	郁新华,全栋梁,刘松龄,等.层板结构内部换热特性的研究[J].航空学报,2003,24(5):405-410.YU Xinhua,QUAN Dongliang,LIU Songlin,et al.Investigation of the internal heat transfer Characteristics of lamilloy[J].ACTA Aeronautica et Astronautica Sinica,2003,24(5):405-410.
[3]	全栋梁,刘松龄,李江海,等.层板冷却特性的实验与数值模拟研究[J].推进技术,2004,5(2):134-138.QUAN Dongliang,LIU Songling,LI Jianghai,et al.Experimental and numerical investigation of the cooling characteristics in a laminate porous plate[J].Journal of Propulsion Technology,2004,25(2):134-138.
[4]	全栋梁,刘松龄,李江海,等.多孔层板冷却有效性的研究[J].航空动力学报,2004,19(4):520-524.QUAN Dongliang,LIU Songling,LI Jianghai,et al.Experimental investigation of cooling effectiveness of laminate porous plates[J].Journal of Aerospace Power,2004,19(4):20-524.
[5]	陈焱,吉洪湖,胡娅萍,等.致密微孔壁绝热冷却效果研究[J].工程热物理学报,2006,27增刊(2):25-28.CHEN Yan,Jl Honghu,HU Yaping,et al.Investigation of adiabatic cooling effectiveness of an effusion cooled plate[J].Journal of Engineering Thermophysics,2006,27(z2):25-28.
[6]	陈焱,吉洪湖,胡娅萍.致密微孔壁复合冷却对流换热系数研究[J].工程热物理学报,2005,26(3):489-491.CHEN Yan,JI Hongbu,HU Yaping.Study of convective heat transfer coefficient of efusion cooling[J].Journal of Engineering Thermophysics,2005,26(3):489-491.
[7]	Sweeney P C,Rhodes J F.An infrared technique for evaluating turbine airfoil cooling designs[J].ASME Journal of Turhomachinery,2001,122:170-177.
[8]	Wang J H,Measner J,Stetter H.An experimental investigation of transpiration cooling Part Ⅰ:Application of an infrared measurement technique[J].International Journal of Rotating Machinery,2003,9(3),153-161.
[9]	Wang J H,Messner J,Stetter H.An experimental investigation of transpiration cooling Part Ⅱ:Comparison of cooling methods and media[J].International Journal of Rotating Machinery,2004,10(5):355-363.
[10]	全栋梁,刘松龄,李江海.层板冷却结构强化换热机理[J].航空动力学报,2004,19(6);860-865.QUAN Dongliang,LIU Songling,LI Jianghai,Numerical investigation on mechanism of heat transfer augmentation in lamilloy[J].Journal of Aerospace Power,2004,19(6):860-865.
[11]	赵梦梦,张驰,林宇震,等.弯曲多孔壁不同倾斜角气膜孔整体气膜冷却效率研究[J].航空动力学报,2007,22(2):210-215.ZHAO Mengmeng,ZHANG Chi,LIN Yuzhen,et al.Study of overall cooling effectiveness of discrete holes with different angles to concave wall[J].Journal of Aerospace Power,2007,22(2):210-215.
[12]	李彬,胡正义,林宇震,等.多斜孔壁整体冷却实验研究[J].航空动力学报,1999,4(2):157-160.LI Bin,HU Zhengyi,LIN Yuzhen,et al.An experimental study on overall cooling effectiveness of inclined multihole plates[J].Journal of Aerospace Power,1999,14 (2):157-160.