基于RTWEC的控制算法自动代码生成技术
Automatic code generation technology for control method based on RTWEC
-
摘要: 研究基于实时工作间嵌入式代码生成器(Real-timeworkshopembeddedcoder,RTWEC)的航空发动机复杂控制算法自动生成可执行代码技术,介绍原理及其应用方法.针对某型航空发动机控制器多变量控制算法的手动编程和自动生成代码进行电子控制器半实物仿真并比较分析.结果说明该方法简单、易行,有效降低了程序编制、查错和调试的工作量,缩短了研制周期,可以广泛用于控制器复杂算法从设计仿真到具体实现的开发过程.Abstract: This paper analyzed automatic code generation technology for complex control of aeroengine with real-time workshop embedded coder(RTWEC),and described the principle and applied method.Automatically generated and manually programmed codes of an areoengine controller's multi-variable control method were comparatively analyzed by Hardware in-the-loop simulation(HILS) of electronic controller.The results show that this feasible technology could reduce the workload of programming,checking,debugging,and also shorten the development cycle,so it can be widely used in the development process of controller's complex algorithm from design and simulation to implementation.
-
[1] Robert J M Jr.USAF gas turbine trends into the next century[R].ISABE-97-7157,1997. [2] 张绍基.航空发动机控制系统的研发与展望[J].航空动力学报,2004,19(3):375-382.ZHANG Shaoji.A review of aeroengine control system[J].Journal of Aerospace Power,2004,19(3):375-382. [3] 王永庭,郭迎清,王海泉.航空发动机非完全恢复的LQG/LTR控制系统设计[J].航空动力学报,2007,22(3):485-489.WANG Yongting,GUO Yingqing,WANG Haiquan.Design of non-fully recover LQG/LTR control system of aeroengine[J].Journal of Aerospace Power,2007,22(3),485-489. [4] Rabbath C A,Bensoudane E.Real-time modeling and simulation of a gas-turbine engine control system[R].AIAA 2001-4246,2001. [5] 杨涤,李立涛,杨旭,等.系统实时仿真开发环境与应用[M].北京:清华大学出版社,2002. [6] Michael Abrash.图形程序开发人员指南[M].北京:机械工业出版社,1997.Michael Abrash.Graphics programming black book[M].Beijing:China Machine Press,1997. [7] 郭占社,孟永钢,苏才钧,等.基于Windows的精确定时技术及其在工程中的应用[J].哈尔滨工业大学学报,2005,(12):1717-1720.GUO Zhanshe,MENG Yonggang,SU Caijun,et al.Windows based precise timing technology and its engineering applications[J].Journal of Harbin Institute of Technology,2005,(12):1717-1720. [8] 李同泽.机载软件合格审定的方法[J].航空标准化与质量,1996,(06):32-33.LI Tongze.A method for certification of airborne software[J].Aeronautic Standardization & Quality,1996,(06):32-33
点击查看大图
计量
- 文章访问数: 1561
- HTML浏览量: 1
- PDF量: 529
- 被引次数: 0