一种改进的转子系统临界转速调整方法

王东华; 刘占生; 窦唯

一种改进的转子系统临界转速调整方法

哈尔滨工业大学能源科学与工程学院, 哈尔滨 150001

计量
- 文章访问数: 1534
- HTML浏览量: 157
- PDF量: 455
- 被引次数: 0
出版历程
- 收稿日期: 2008-01-03
- 修回日期: 2008-04-25
- 刊出日期: 2008-08-28

Improved method for adjusting critical speeds of rotor systems

School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

摘要

摘要: 针对转子系统的临界转速最优化调整问题,在详细分析已有方法的基础上,提出一种改进的优化调整方法,以调整量最小为目标函数,达到预先给定的临界转速为约束条件,推导了优化调整模型,无需进行修正处理,简化了优化流程.对某转子系统进行最优化调整的计算结果表明,该方法不仅可得到满足要求的最优解,而且能有效的减少计算耗时.
- 临界转速调整 /
- 转子系统 /
- 拉格朗日乘子法 /
- 优化设计
Abstract: The problem of critical speeds optimal adjustment in rotor systems was provided and an improved method was presented based on the analysis of existing methods.Minimizing the adjustment cost was the object function and adjusting current critical speeds to the desired values was treated as a constraint.The proposed method predigests the design process without needing correction.The results of study on a rotor system show that the improved method can get the optimal solution and save much time.
- critical speeds adjustment /
- rotor systems /
- lagrange-multiflier method /
- optimization design

HTML

参考文献(11)

[1]	Choi B G,Yang B S.Optimum shape design of rotor shafts using genetic algorithm[J].ASME Journal of Vibration and Control,2000,6(2):207-222.
[2]	黄太平,罗贵火.转子动力学优化设计[J].航空动力学报,1994,9(2):113-116.HUANG Taiping,LUO Guihuo.Optimization design of rotordynamics[J].Journal of Aerospace Power,1994,9 (2):113-116.(in Chinese)
[3]	Lin Y H,Lin S C.Optimal weight design of rotor systems with oil-film bearings subjected to frequency constraints[J].Finite Elements in Analysis and Design,2001,37 (10):777-798.
[4]	Lee D S,Choi D H.Reduced weight design of a flexible rotor with ball bearing stiffness characteristics varying with rotational speed and load[J],ASME Journal of Vibration and Acoustics,2000,122(3):203-208.
[5]	Lin Y,Cheng L.Optimal design of complex flexible rotorsupport systems using minimum strain energy under multi-constraint conditions[J].Journal of Sound and Vibration,1998,215(5):1121-1134.
[6]	Angantyr A,Aidanp J O.A Pareto-based genetic algorithm search approach to handle damped natural frequency constraints in turbo generator rotor system design[J].Journal of Engineering for Gas Turbines and Power,2004,126(3):619-625.
[7]	姚学诗,周传荣.转子系统动力学优化设计研究[J].发电设备,2003,(5):18-21.YAO Xueshi,ZHOU Chuanrong.Study on optimization design of rotordynamics[J].Power Equipment,2003,(5):18-21.(in Chinese)
[8]	Done G T S.Adjustment of rotor model to achieve agreement between calculated and experimental natural frequencies[J].Journal of Mechanical Engineering Science,1979,21:389-396.
[9]	钟一谔,何衍宗,王正.转子动力学[M].北京:清华大学出版社,1984.
[10]	Choi B K,Yang B S.Optimal design of rotor-bearing systems using immune-genetic algorithm[J].ASME Journal of Vibration and Acoustics,2001,123(3):398-401.
[11]	Huang S C,Lin C A.Sensitivity analysis and optimization of undamped rotor critical speeds to supports stiffness[J].Journal of Vibration and Acoustics,2002,124(2):296-301.