提高Spalart-Allmaras湍流模型对分离模拟能力的研究

马威; 王丹华; 陆利蓬

提高Spalart-Allmaras湍流模型对分离模拟能力的研究

北京航空航天大学能源与动力工程学院, 北京 100191

基金项目: 航空推进技术(APTD)验证

计量
- 文章访问数: 2116
- HTML浏览量: 137
- PDF量: 473
- 被引次数: 0
出版历程
- 收稿日期: 2007-08-01
- 修回日期: 2007-10-15
- 刊出日期: 2008-08-28

Investigation on improving the capability of predicting separation of Spalart-Allmaras turbulence model

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为了提高Spalart-Allmaras湍流模型对分离的模拟能力,提出了两种改进方法.第一种是根据模型特点而提出的提高对雷诺正应力的模拟精度,第二种是基于湍流特性的理论分析而提出的对模型生成与耗散的关系进行修正.研究结果表明:第一种方法,由于没有明显提高对雷诺正应力的模拟精度,从而并没有提高模型对分离流动的模拟能力;第二种方法,由于改进了模型对强非平衡湍流的模拟能力,从而明显地提高了模型对分离流动的模拟精度.
- Spalart-Allmaras湍流模型 /
- 分离 /
- 雷诺应力 /
- 非平衡
Abstract: Two methods were applied to improve the capability of predicting separation of Spalart-Allmaras turbulence model.One was to improve the capability of predicting Reynolds normal stress based on the property of Spalart-Allmaras turbulence model,the other one was to calibrate the production coefficient based on the non-equilibrium of turbulence in separation region.The results show that: the first one contributes little to improving the capability of prediction separation of Spalart-Allmaras turbulence model,because the capability of predicting Reynolds normal stresses is not improved considerably;while the second one improves obviously the capability of prediction separation of Spalart-Allmaras turbulence model,because the capability of S-Amodel in capturing the non-equilibrium turbulence is improved notably.
- Spalart-Allmaras turbulence model /
- separation /
- Reynolds stresses /
- non-equilibrium

HTML

参考文献(11)

[1]	Spalart P R,Allmaras S R.A one-equation turbulence model for aerodynamic flows[R].AIAA-92-0439,1992.
[2]	Spalart P R,Allmaras S R.A one-equation turbulence model for aerodynamic flows[J].La Recherche Aérospatiale,1994,1:5-21.
[3]	Wilcox D C.Turbulence modeling for CFD[M].Second Edition.California:DCW Industries Inc.,2000:103-226.
[4]	Sellers W L,Rumsey C L.CPD validation of synthetic jets and turbulent separation control[EB/OL].Williamsburg,Virginia:NASA Langley Research Center,2004.http://cfdval2004,larc.nasa.gov.
[5]	Rumsey C L,Catski T B,Sellers W L,et al.Summary of the 2004 CFD validation workshop on synthetic jets and turbulent separation control[R].AIAA-2004-2217,2004.
[6]	Greenblatt D,Paschal K B,YAO Chungsheng,et al.A separation control CFD validation test case Part 1:Baseline & steady suction[R].AIAA-2004-2220,2004.
[7]	宁方飞.考虑真实几何复杂性的跨声压气机内部流动的数值模拟[D].北京:北京航空航天大学,2002.NING Fangfei.Numerica investigations of flows in transoni compressors with real geometrical complexities[D].Beijing:Beijing University of Aeronautics and Astronautics,2002.(in Chinese)
[8]	Sally V.Two-dimensional flow control analysis on the hump model[EB/OL].Williamsburg,Virginia:NASA Langley Research Center,2004.http://cfdval2004,larc.nasa.gov/Presentations/09Viken,ppt.
[9]	Marongiu C,Iaccarino G.Investigation of a boundary condition model for the simulation of controlled flows[EB/OL].Williamsburg,Virginia:NASA Langley Research Center,2004.http://cfdval2004,larc.nasa.gov/Presentations/12Marongiu,ppt.
[10]	陈懋章.粘性流体动力学基础[M].北京:高等教育出版社,2002:357-359.CHEN Maozhang.Fundamentals of viscous fluid dynamics[M].Beijing:High Education Press,2002:357-359.(in Chinese)
[11]	Bradshaw P,Ferriss D H,Atwell N P.Calculation of boundary-layer development using the turbulent energy equation[J].J.Fluid Mech.,1967,28(3):593-616.