应用非均匀B样条拟合涡轮发动机部件特性

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

基金项目: 东北大学博士后科研基金

Fitting of component characteristics of turbine engine based on non-uniform rational B-splines

1.
School of Information Science and Engineering, Northeast University, Shenyang 110004, China
2.
School of Mechanical and Vehicle Engineering, Beijing Institute of Technology, Beijing 100081, China

摘要: 为了使气动热力模型更好的逼近涡轮发动机,应用成熟的非均匀B样条来拟合部件特性.这种方法既可以保证发动机计算的整体性能也大大提高了其局部特性的准确性.单轴涡喷发动机的算例证明了方法的有效性.
- 部件特性 /
- 涡轮发动机 /
- 非均匀B样条 /
- 拟合
Abstract: Non-uniform rational B-splines(NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.This method ensures that the overall and local characteristics of the model can be improved greatly with NURBS.The validation of method is demonstrated by one-spool turbojet engine.
- component characteristics /
- turbine engine /
- non-uniform rational B-splines /
- fitting

[1]	翁史烈.燃气轮机性能分析[M].上海:上海交通大学出版社,1987.
[2]	史利民,王仁宏.NURBS曲线曲面拟合数据点的迭代算法[J].数学研究与评论,2006,26(4):735-743.SHI Limin,WANG Renhong.Interative arithmetic of NURBS curve and surface fitting points[J].Journal of Mathematical Research and Exposition,2006,26(4);735-743.(in Chinese)
[3]	王仁宏.数值逼近[M].北京:高等教育出版社,1999.
[4]	蔺宏伟,王国瑾,董辰世.用迭代非均匀B-spline曲线(曲面)拟合给定点集[J].中国科学(E辑),2003,33(10):912-923.LIN Hongwei,WANG Guojin,DONG Chenshi.Interative NURBS curve(surface) fitting assigned points set[J].Science in China(Series E),2003,33 (10):912-923.(in Chinese)
[5]	樊思齐,徐芸华.航空推进系统控制[M].西安:西北工业大学出版社,1995.

点击查看大图