二次流喷射位置对流体推力矢量喷管气动性能影响的数值模拟

基金项目: 国家自然科学基金(50576077);教育部新世纪优秀人才计划

Numerical simulation of aerodynamic effects of secondary injection positions on fluidic thrust vectoring nozzle

School of Engine and Energy, Northwestern Polytechnical University, Xi'an 710072, China

摘要: 数值模拟了二次流喷射位置对基于激波控制的二维收-扩(2DCD)喷管的流体推力矢量气动性能,结果表明喷射位置对矢量角有较大影响,在喷管落压比NPR=4.5时,二次流喷射位置相对位于喷管发散段中部时,矢量角最大;在NPR≥7.2时,二次流喷射位置越靠近出口,矢量角越大.喷射位置对推力系数及流量系数的影响不大.
- 流体推力矢量 /
- 矢量角 /
- 二维收缩扩张(2DCD)喷管
Abstract: The aerodynamic effects on fluidic thrust vectoring of a two-dimensional,convergent-divergent(2DCD) nozzle with fluidic injection were simulated numerically,showing that different fluidic injection positions have bigger influence on the vector angle.In the case of nozzle NPR=4.5,the vector angle of secondary injection position is maximum in relation to the divergent middle section of nozzle,in the case of nozzle NPR≥7.2,the vector angle becomes bigger if the secondary injection position is closer to the outlet.The results indicate that vector angle is sensitive,and thrust coefficient and discharge coefficient are insensitive to the injection position.
- fluidic thrust vectoring /
- vector angle /
- two-dimensional convergent-divergent(2DCD) nozzle

[1]	Waithe K A,Deere K A.Experimental and computational investigation of multiple injection ports in a convergent-divergent nozzle for fluidic thrust vectoring[R].AIAA 2003-3802.
[2]	Deere K A,Berrier B L,Flamm J D.A computational study of a new dual throat fluidic thrust vectoring nozzle concept[R].AIAA 2005-3502.
[3]	Martin A I.The aerodynamic variable nozzle[J].Journal of Aeronautical Sciences,1957,24(5),357.
[4]	Deere K A.Summary of fluidic thrust vectoring research conducted at NASA Langley Research Center[R].AIAA 2003-3800.
[5]	Deere K A.Computational investigation of the aerodynamic effects on fluidic thrust vectoring[R].AIAA 2000-3598.
[6]	Hamed A,Laskowski G.A parametric study of slot injection thrust vectoring in s 2DCD nozzle[R].AIAA 1997-3154.
[7]	王占学,黄杰.喷管/飞行器后体一体化数值模拟[J].西北工业大学学报.2000,18(4):587-590.WANG Zhanxue,HUANG lie.Numerical simulation of integration of nozzle/vehicle-afterbody[J].Journal of Northwestern Polytechnical University,2000,18 (4):587-590.(in Chinese)
[8]	汪维娜,王占学,乔渭阳.单斜面膨胀喷管几何参数对流场和性能的影响[J].航空动力学报,2006,21(2):280-284.WANG Weina.WANG Zhanxue,QIAO Weiyang.Investigation of influence of single expansion ramp nozzle geometric parameters on the flow field and performance[J].Journal of Aerospace Power,2006,21(2):280-284.(in Chinese)