金属燃料/水冲压发动机一次进水试验

胡凡; 张为华; 夏智勋; 胡建新; 李是良; 黄利亚

金属燃料/水冲压发动机一次进水试验

国防科学技术大学航天与材料工程学院, 长沙 410073

计量
- 文章访问数: 1750
- HTML浏览量: 93
- PDF量: 539
- 被引次数: 0
出版历程
- 收稿日期: 2007-10-10
- 修回日期: 2008-04-01
- 刊出日期: 2008-10-28

Experimental investigation on once injecting water in metal fuel/water ramjet

Institute of Aerospace and Material Engineering, National University of Defence Technology, Changsha 410073, China

摘要

摘要: 介绍了金属燃料/水冲压发动机试验系统,采用非壅塞式构型实现了镁基金属燃料发动机一次加水后稳定燃烧,试验中进水流量稳定,补燃室与燃烧室压强变化相同.试验研究了一次水燃比和燃料燃速对发动机燃烧性能的影响,试验结果表明:当一次水燃比在一定范围内变化时,发动机燃烧效率和喷射效率随水燃比增加而先增加后减少;增加燃料燃速可提高发动机燃烧效率和改善发动机工作性能,但燃速增加需满足发动机长时间工作需求.
- 金属燃料/水冲压发动机 /
- 试验 /
- 水燃比 /
- 工作过程 /
- 燃烧性能
Abstract: The experimental system of metal fuel/water ramjet was introduced.The unchoked ramjet of metal fuel containing magnesium can burn steadily after once injecting water.In the experiment,the mass flux of water was stable and the pressure of chamber changed similarly with the secondary chamber.The effect of once water/fuel ratio and fuel burn rate for the ramjet was studied through experiments.The results show the combustion and injection efficiency for ramjet firstly increase,and then decrease with the increase of water/fuel ratio in a define range of ratio;also,the combustion efficiency and the operation performance are improved observably by increasing the burn rate of fuel metal whose variation must under the need of the long time operation for the ramjet.
- metal fuel/water ramjet /
- experiment /
- water/fuel ratio /
- operation process /
- combustion performance

HTML

参考文献(7)

[1]	Foote J P,Lineberry J T,Thompson B R,et al.Investigation of alunimium particle combustion for underwater propulsion applications[R].AIAA 96-3086.
[2]	Miller T F,Waiter J L,Kiely D H.A next-generation AUV energy system based on aluminum-seawater eombustion[R].IEEE 0-7803-7572-6/02,2002.
[3]	李是良,张炜,朱慧,等.水冲压发动机用金属燃料的研究进展[J].火炸药学报,2006,29(6):69-73.LI Shiliang,ZHANG Wei,ZHU Hui,et al.The research development of the hydroreactive metal fuel used for water-ramjet engine[J].Chinese Journal of Explosives and Propellants,2006,29(6):69-73.(in Chinese)
[4]	缪万波,夏智勋,郭健,等.金属/水反应冲压发动机理论性能计算与分析[J].推进技术,2005,26(6):563-566.MIAO Wanbo,XIA Zhixun,GUO Jian,et al.Thermodynamic calculation for the water ramjet[J].Journal of Propulsion Technology,2005,26(6):563-566.(in Chinese)
[5]	出维平,蔡体敏,陆贺建,等.水冲压发动机热力计算[J].固体火箭技术,2006,29(2);95 98.TIAN Weiping,CAI Timin.LU Hejian,et al.Thermodynamic calculation for water rarnjet[J].Journal of Solid Rocket Technology,2006,29(2):95-98.(in Chinese)
[6]	李是良,张炜,张为华,等.镁基水反应金属燃料及水冲压发动机初步试验[J].国防科技大学学报,2007,29(1):35-38.LI Shiliang,ZHANG Wei,ZHANG Weihua,et al.Primary experimental study on the performance of water-ramjet engine and the magnesium-based fuel[J].Journal of National University of Defense Technology,2007,29(1):35-38.(inChinese)
[7]	夏智勋,胡建新,王志吉,等.非壅塞同体火箭冲压发动机二次燃烧试验研究[J].航空动力学报,2004,19(5):113-717.XIA Zhixun.HU Jianxin,WANG Zhiji,et al.Experimental investigation on secondary combustion in unehoked ducted rocket[J].Journal of Aerospace Power,2004,19(5):713-71 7.(in Chinese)