组合抽吸对大转角扩压叶栅性能的影响

郭爽; 陈绍文; 陆华伟; 宋彦萍; 陈浮; 王仲奇

组合抽吸对大转角扩压叶栅性能的影响

1.
哈尔滨工业大学能源科学与工程学院,哈尔滨 150001
2.
大连海事大学轮机工程学院,大连 116026

基金项目: 国家自然科学基金(50976026)

计量
- 文章访问数: 1748
- HTML浏览量: 102
- PDF量: 416
- 被引次数: 0
出版历程
- 收稿日期: 2009-11-17
- 修回日期: 2010-03-07
- 刊出日期: 2010-12-28

Effect of compound boundary layer suction on the performance of a high-load diffusion compressor cascade with a large camber angle

1.
School of Energy Science and Engineering, Harbin Institute of Technology,Harbin 150001,China
2.
Marine Engineering College, Dalian Maritime University,Dalian 116026,China

摘要

摘要: 实验研究了低速条件下在端壁和吸力面同时进行附面层吸除对某大转角扩压叶栅性能的影响.在叶片表面及端壁进行了墨迹流动显示,并对叶栅出口截面进行了测量.基于实验的抽吸槽布置方式:端壁吸气主要影响区域是吸力面角区;吸力面抽吸可以减小角区范围,延迟叶片吸力面附面层转捩,改善中径处流场;组合抽吸则优化了叶栅整体流场,使流动更加均一高效,由于削弱了端壁和吸力面附面层间的相互作用,组合抽吸在大吸气量下优于前两种吸气方式.
- 附面层组合抽吸 /
- 大转角扩压叶栅 /
- 实验研究 /
- 吸气量 /
- 吸气位置
Abstract: The effect of compound boundary layer suction on the aerodynamic performance of a high-load diffusion compressor cascade with a large camber angle was experimentally investigated through ink-trace flow visualization and outlet flow field measurement.Experimental results show that suction on the endwall mainly influences the suction surface corner;suction on the suction surface not only shrinks the endwall corner region,but also delays the transition of the suction surface boundary layer,and improves the flow field around the midspan;the whole flowfield is improved in the case of compound boundary layer suction,and the performance is superior to each of the former two at high suction flow rates as the interaction between the boundary layer of endwall and suction surface is better controlled.

HTML

参考文献(12)

[1]	陈矛章.风扇/压气机技术发展和对今后工作的建议[J].航空动力学报,2002,17(1):1-15. CHEN Maozhang.Development of fan/compressor techniques and suggestions on further researches[J].Journal of Aerospace Power,2002,17(1):1-15.(in Chinese)
[2]	Kerrebrock J L,Reijnan D P,Ziminsky W S,et al.Aspirated compressors .ASME Paper 97-GT-525,1997.
[3]	Kerrebrock J L,Drela M,Merchant A A,et al.A family of designs for aspirated compressors .ASME Paper 98-GT-196,1998.
[4]	Merchant A A.Aerodynamic design and performance of aspirated airfoils .ASME Paper GT2002-30369,2002.
[5]	Hubrich K,Bolcs A,Ott P.Boundary layer suction via a slot in a transonic compressor-numerical parameter study and first experimental .ASME Paper GT2004-53758,2004.
[6]	Merchant A,Kerrebrock J L,Adamczyk J J,et al.Experimental investigation of a high pressure ratio aspirated fan stage[J].Journal of Turbomachinery,2005,127(1):43-51.
[7]	周海,李秋实,陆亚钧.跨声风扇转子叶片抽吸气数值试验探索[J].航空动力学报,2004,19(3):408-412. ZHOU Hai,LI Qiushi,LU Yajun.Prospects of numerical analysis of an aspirated transonic fan rotor[J].Journal of Aerospace Power,2004,19(3):408-412.(in Chinese)
[8]	张华良,谭春青,张新敬,等.采用附面层抽吸(BLS)控制流动分离的数值模拟[J].推进技术,2009,30(2):192-196. ZHANG Hualiang,TAN Chunqing,ZHANG Xinjing,et al.Numerical investigation on application of boundary layer suction to control the flow separations[J].Journal of Propulsion Technology,2009,30(2):192-196.(in Chinese)
[9]	南向谊,刘波,靳军,等.超声速压气机转子叶片吸力面抽气抑制附面层分离的机理[J].航空动力学报,2007,22(7):1093-1099. NAN Xiangyi,LIU Bo,JIN Jun,et al.Study of suppression boundary layer separation on the suction surface of supersonic compressor rotor[J].Journal of Aerospace Power,2007,22(7):1093-1099.(in Chinese)
[10]	牛玉川,朱俊强,聂超群,等.吸附式亚声速压气机叶栅气动性能实验及分析[J].航空动力学报,2008,23(3):483-489. NIU Yuchuan,ZHU Junqiang,NIE Chaoqun,et al.Experimental investigation of aerodynamics performance of aspirate subsonic compressor cascade[J].Journal of Aerospace Power,2008,23(3):483-489.(in Chinese)
[11]	陈绍文,郭爽,陆华伟,等.超高负荷吸附式压气机叶栅气动性能分析[J].热能动力工程,2009,24(2):167-171. CHEN Shaowen,GUO Shuang,LU Huawei,et al.Analysis of the aerodynamic performance of a super highly loaded adsorption type compressor cascade[J].Journal of Engineering for Thermal Energy and Power,2009,24(2):167-171.(in Chinese)
[12]	郭爽,陈绍文,宋宇飞,等.附面层抽吸对高负荷扩压叶栅损失的影响[J].工程热物理学报,2009,30(4):574-576. GUO Shuang,CHEN Shaowen,SONG Yufei,et al.Effects of boundary layer suction on the loss of highly-loaded compressor cascade[J].Journal of Engineering Thermophysics,2009,30(4):574-576.(in Chinese)