镍基单晶合金蠕变研究: 叶片蠕变的有限元分析

杨晓光; 白露; 石多奇; 于慧臣

镍基单晶合金蠕变研究: 叶片蠕变的有限元分析

1.
北京航空航天大学能源与动力工程学院,北京 100191
2.
中国航空工业集团公司北京航空材料研究院,北京 100095

计量
- 文章访问数: 1690
- HTML浏览量: 95
- PDF量: 420
- 被引次数: 0
出版历程
- 收稿日期: 2009-10-31
- 修回日期: 2010-09-17
- 刊出日期: 2010-12-28

Creep of Ni-based single crystal superalloy: finite element analysis of blade creep

1.
School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China
2.
Beijing Institute of Aeronautical Materials, China Aviation Industry Corporation,Beijing 100095,China

摘要

摘要: 该文为镍基单晶合金高温蠕变建模研究工作的第三部分,利用前面研究已建立的蠕变材料模型及编写的ABAQUS软件UMAT子程序,选取了模型涡轮一级叶片叶身段,利用单晶DD3蠕变数据和实际叶片温度场,通过设定不同的晶体去向,分析了叶片主晶体去向偏差对叶片蠕变的影响,计算同时也给出了次向晶向偏差对分析的影响.整个分析,揭示了不同取向对叶片蠕变的影响:不同于材料的蠕变,叶片在通常控制的10°取向偏差内,蠕变分散也较大.
- 镍基单晶合金 /
- 蠕变 /
- 有限元分析 /
- 涡轮叶片 /
- ABAQUS软件
Abstract: This paper is the third part of the research on creep behavior of single crystal superalloy. A UMAT subroutine of ABAQUS based on the creep model was developed. The first order blade of a turbine was chosen as the simulating model. The DD3 creep data and the real temperature field was used to analyze the influence of crystal orientations to the blade creep behavior though defining different crystal orientations. At the same time the influence of the deviation of secondary crystal orientation was also analyzed. Consequently the influence of crystal orientations to the blade creep behavior was found. Unlike the material creep behaviors, the dispersion of blade creep behavior is great though 10° deviation of the crystal orientation is controlled.
- Ni-based single crystal superalloy /
- creep /
- finite element analysis /

HTML

参考文献(12)

[1]	杨晓光,白露,石多奇,等.镍基单晶合金蠕变研究:试验、机理及材料模型[J].航空动力学报,2009,24(9):1994-2000. YANG Xiaoguang,BAI Lu,SHI Duoqi,et al.Creep research of Ni-based single crystal superalloy:experiment,mechanism and material model [J].Journal of Aerospace Power,2009,24(9):1994-2000.(in Chinese)
[2]	Gunturi S S K,Maclachlan D W,Knowles D M.Anisotropic creep in CMSX-4 in orientations distant from 〈001〉[J].Materials Science and Engineering:A,2000,289(1-2):289-298.
[3]	Shollock B A,Buffie J Y,Curtis R V,et al.Characterisation of crystallographic evolution during creep deformation of a single crystal superalloy[J].Scripta Materialia,1997,36(12):1471-1478.
[4]	Sinha N K.Constant-load tertiary creep in nickel-base single crystal superalloys[J].Materials Science and Engineering:A,2006,432(1-2):129-141.
[5]	Diologent F,Caron P.On the creep behavior at 1033 ℃ of new generation single-crystal superalloys[J].Materials Science and Engineering:A,2004,385(1-2):245-257.
[6]	Richards-Frandsen R,Tien J K.On the effect of orientation on creep-fatigue behavior of a single crystal nickel-base superalloy[J].Scripta Metallurgica,1984,18(7):731-734.
[7]	白露,杨晓光,石多奇,等.镍基单晶蠕变研究:基于晶体塑性的蠕变建模[J].航空动力学报,2009,24(9):2001-2006. BAI Lu,YANG Xiaoguang,SHI Duoqi,et al.Crystal-plasticity-besed creep modeling for Ni-based single crystal superalloy[J].Journal of Aerospace Power,2009,24(9):2001-2006.(in Chinese)
[8]	Bertram A,Olschewski J.A phenomenological anisotropic creep model for cubic single crystals[M].Magdebury,Germany:Academic Press,2001:303-307.
[9]	Prasad S C,Rao I J,Rajagopal K R.A continuum model for the creep of single crystal nickel-base superalloys[J].Acta Materialia,2005,53(3):669-679.
[10]	Li S X,Smith D J.High temperature fatigue-creep behaviour of single crystal SRR99 nickel base superalloys:Ⅱ—Fatigue-creep life behaviour [J].Fatigue & Fracture of Engineering Materials & Structures,1995,18(5):631-643.
[11]	庄茁,由小川,廖剑晖,等.基于ABAQUS的有限元分析和应用[M].北京:清华大学出版社,2009. ZHUANG Zhuo,YOU Xiaochuan,LIAO Jianhui,et al.Finite element analysis and application base on ABAQUS[M].Beijing: Tsinghua University Press,2009.(in Chinese)
[12]	《中国航空材料手册》编辑委员会.中国航空材料手册(第二卷)[M].北京:中国标准出版社,2002. Committee of Handbook of China Aeronautic Materials.Handbook of China aeronautic materials Vol.2[M].China:Standards Press of China,2002.(in Chinese)