基于云纹干涉法与钻孔法的等离子热障涂层残余应力实验

齐红宇; 刘金龙; 杨晓光; 王井科

基于云纹干涉法与钻孔法的等离子热障涂层残余应力实验

北京航空航天大学能源与动力工程学院,北京 100191

计量
- 文章访问数: 1705
- HTML浏览量: 65
- PDF量: 16
- 被引次数: 0
出版历程
- 收稿日期: 2010-01-27
- 修回日期: 2010-04-28
- 刊出日期: 2011-03-28

Investigation on residual stress of plasma sprayed thermal barrier coatings based on moire interferometry and hole drilling method

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics,Beijing 100191,China

摘要

摘要: 应用云纹干涉法与钻孔法结合的光测力学实验方法,研究了等离子热障涂层基体材料镍基高温合金DZ125的残余应力.通过实验和计算获得了等离子喷涂工艺下基体DZ125的残余变形场、残余应变场和残余应力,并描述了其主要特征.结果表明,采用云纹干涉法与钻孔法结合测定热障涂层残余应力具有全场测量和高灵敏度等优点,这对于采用光学手段研究热障涂层残余应力有着积极的意义.
- 热障涂层 /
- 残余应力 /
- 云纹干涉法 /
- 钻孔法 /
- DZ125
Abstract: Moire interferometry technique and hole drilling method were applied to study the residual stress of DZ125 in thermal barrier coatings (TBCs).The residual deformation,residual strain,and residual stress were obtained experimentally and computationally.The results show that moire interferometry combined with hole drilling method has the advantage of full field measurement and high sensitivity in measuring residual stress of TBCs.It has positive significance to study residual stress of TBCs using optical measurement method.
- thermal barrier coatings /
- residual stress /
- moire interferometry /

HTML

参考文献(15)

[1]	齐红宇,王亚梅,杨晓光,等.等离子工艺热障涂层的热疲劳分析[J].失效分析与预防,2008,3(1):15-18. QI Hongyu,WANG Yamei,YANG Xiaoguang,et al.Thermal fatigue of atmospheric plasma sprayed thermal barrier coatings[J].Failure Analysis and Prevention,2008,3(1):15-18.(in Chinese)
[2]	魏洪亮,杨晓光,齐红宇,等.等离子涂层热疲劳失效模式及失效机理研究[J].航空动力学报,2008,23(2):270-275. WEI Hongliang,YANG Xiaoguang,QI Hongyu,et al.Study of failure mode and failure mechanisms on thermal fatigue of plasma sprayed thermal barrier coatings[J].Journal of Aerospace Power,2008,23(2):270-275.(in Chinese)
[3]	魏洪亮,杨晓光,齐红宇.等离子涂层涡轮导向叶片热疲劳寿命预测研究[J].航空动力学报,2008,23(1):1-8. WEI Hongliang,YANG Xiaoguang,QI Hongyu.Study on thermal fatigue life prediction for plasma sprayed thermal barrier coatings on the surface of turbine vane[J].Journal of Aerospace Power,2008,23(1):1-8.(in Chinese)
[4]	耿瑞,周柏卓,齐红宇,等.热障涂层结合强度及失效模式研究[J].航空动力学报,2003,18(6):50-53. GENG Rui,ZHOU Baizhuo,QI Hongyu,et al.The bonding strength and failure modes of thermal barrier coatings[J].Journal of Aerospace Power,2003,18(6):50-53.(in Chinese)
[5]	陈晓鸽,杨树森,张红松,等.大气等离子喷涂ZrO₂ 与Sm₂Zr₂O₇ 热障涂层的残余热应力分析[J].铸造技术,2009,30(9):1148-1152. CHEN Xiaoge,YANG Shusen,ZHANG Hongsong,et al.Analysis of residual thermal stresses of plasma sprayed ZrO₂ and Sm₂Zr₂O₇ thermal barrier coatings[J].Foundry Technology,2009,30(9):1148-1152.(in Chinese)
[6]	亚敏,戴福隆,吕坚.搅拌摩擦焊接头残余应力的试验[J].焊接学报,2002,23(5):53-56. YA Min,DAI Fulong,LV Jian.Study on residual stress of friction stir welding by moiré interferometry and hole-drilling method[J].Transactions of the China Welding Institution,2002,23(5):53-56.(in Chinese)
[7]	戴福隆,亚敏,谢惠民,等.云纹干涉与钻孔法测量残余应力的实验方法与系统[J].实验力学,2003,18(3):313-318. DAI Fulong,YA Min,XIE Huimin,et al.An experimental method and system for residual stress measurement with moiré interferometry and hole drilling[J].Journal of Experimental Mechanics,2003,18(3):313-318.(in Chinese)
[8]	Morita Y,Arakawa K,Todo M.Experimental analysis of thermal displacement and strain distributions in a small outline J-leaded electronic package by using wedged-glass phase-shifting moire interferometry[J].Optics and Lasers in Engineering,2008,46(1):18-26.
[9]	Wood J D,Sobolewski P,Thakur V,et al.Measurement of microstrains across loaded resin-dentin interfaces using microscopic moire interferometry[J].Dental Materials,2008,24(7):859-866.
[10]	Pignatiello F,de Rosa M,Ferraro P,et al.Measurement of the thermal expansion coefficients of ferroelectric crystals by a moire interferometer[J].Optics Communications,2007,277(1):14-18.
[11]	Mollenhauer D H,Fredrickson B M,Schoeppner G A,et al.Moire interferometry measurements of composite laminate repair behavior:influence of grating thickness on interlaminar response[J].Composites Part A:Applied Science and Manufacturing,2008,39(8):1322-1330.
[12]	王亮,王铀,田伟,等.等离子喷涂纳米结构与传统结构热障涂层的残余应力对比研究[J].材料保护,2009,42(3):58-62. WANG Liang,WANG You,TIAN Wei,et al.Comparative study of the residual stress in plasma sprayed nanostructure and conventional structure coatings[J].Materials Protection,2009,42(3):58-62.(in Chinese)
[13]	常红,姚河省,候丽丽.相移云纹法与盲孔法相结合检测复合材料的残余应力[J].力学季刊,2006,27(3):511-514. CHANG Hong,YAO Hesheng,HOU Lili.Combined phase shift moire interence method with bind hole method to expect composite materials' residual stress[J].Chinese Quarterly of Mechanics,2006,27(3):511-514.(in Chinese)
[14]	朱甫金,陶宝祺.小孔法测量正交各向异性材料残余应力[J].复合材料学报,1998,15(2):93-97. ZHU Pujin,TAO Baoqi.Measurement of residual stresses in orthotropic materials by the hole drilling method[J].Acta Materiea Compositae Sinica,1998,15(2):93-97.(in Chinese)
[15]	航空材料研究院.航空发动机设计用材料数据活页手册[M].北京:中国航空发动机总公司,2000.