配合间隙对涡轮盘-片结构的接触响应 影响分析

彭茂林; 杨自春; 曹跃云; 曹诚

配合间隙对涡轮盘-片结构的接触响应影响分析

1.
海军工程大学船舶与动力学院,武汉 430033
2.
中国人民解放军海军通信应用研究所,北京 100841

基金项目: 预研基金(9140A27050109JB1112); 十一五预研基金(513270301)

计量
- 文章访问数: 1705
- HTML浏览量: 56
- PDF量: 17
- 被引次数: 0
出版历程
- 收稿日期: 2010-04-09
- 修回日期: 2011-01-07
- 刊出日期: 2011-04-28

Analysis on the influences of the contact gap on the contact response of turbine disc-blade structures

1.
School of Naval Architecture and Power, Naval University of Engineering,Wuhan 430033,China
2.
Naval Institute of Communication Application, The Chinese People's Liberation Army,Beijing 100841,China

摘要

摘要: 以某燃气涡轮第五级盘-片结构为对象,考虑复杂载荷,利用ANSYS参数化设计语言编制分析程序对结构进行了瞬态热弹塑性有限元分析,分别计算了结构在紧急工况和典型工况下的应力应变.将盘-片的配合间隙设为参数,分析了不同配合间隙时结构的应力应变变化情况,并得到了应力应变发生突变的间隙值,分析了接触传热系数对应力应变的影响.对涡轮盘-片结构的设计、选材、加工以及燃气涡轮的运行管理提出了针对性建议.
- 配合间隙 /
- 接触分析 /
- 热弹塑性分析 /
- 涡轮盘-片 /
- 瞬态分析
Abstract: Taking the given fifth disc-blade structures of the gas turbine as an investigation object in consideration of the complex loads, the transient thermo-elastic-plastic finite element analysis of the contact disc-blade structures was completed using ANSYS program designed with ANSYS parameter design language(APDL). The stress and strain of turbine disc-blade structures were calculated respectively under the urgent loads and the typical loads. The disc-blade gap was regarded as a parameter, and the changes of stress and strain of the structures with different contact gaps were analyzed. Meanwhile, the exact value of the contact gap when the stress and strain changed suddenly was obtained. Moreover, the influence of the contact heat transfer coefficient on the stress and strain was discussed. Finally, some constructive suggestions were given for the processing of designing, machining, the improvement of material properties of the disc-blade structures and the operation and management of the gas turbine.
- contact gap /
- contact analysis /
- thermo-elastic-plastic analysis /

HTML

参考文献(14)

[1]	高勇,王延荣.涡轮转子叶片低循环疲劳/蠕变寿命的预测[J].燃气涡轮试验与研究,2005,18(2):23-26. GAO Yong,WANG Yanrong.Low cycle fatigue-creep life prediction for turbine rotor blade[J].Gas Turbine Experiment and Research,2005,18(2):23-26.(in Chinese)
[2]	丁智平,刘义伦,尹泽勇.燃气涡轮转子盘-片系统三维非线性循环应力-应变分析[J].机械设计,2004,21(8):38-43. DING Zhiping,LIU Yilun,YIN Zeyong.Three dimensional nonlinear cyclic stress-strain analysis of gas turbine rotor disc-blade system[J].Journal of Machine Design,2004:21(8):38-43.(in Chinese)
[3]	孙瑞杰,闫晓军.涡轮叶片榫齿部位疲劳/蠕变试验的新特点[J].航空动力学报,2007:22(3):419-422. SUN Ruijie,YAN Xiaojun.New character of fatigue-creep tests on serration of turbine blades[J].Journal of Aerospace Power,2007,22(3):419-422.(in Chinese)
[4]	付娜.某航空发动机涡轮盘和叶片的强度分析和寿命计算 .西安:西北工业大学,2006. FU Na.Strength analysis and life prediction of a aeronautics gas turbine disc and blade .Xi'an:Northwestern Polytechnical University,2006.(in Chinese)
[5]	赵霞.某涡浆发动机涡轮转子强度与寿命计算 .南京:南京航空航天大学,2005. ZHAO Xia.Strength analysis and life prediction of a turboprop gas turbine rotor .Nanjing:Nanjing University of Aeronautics and Astronautics,2005.(in Chinese)
[6]	杨自春,申文才,彭茂林.随机环境下涡轮盘-片剩余寿命预测方法[J].航空动力学报,2009,24(8):1677-1683. YANG Zichun,SHEN Wencai,PENG Maolin.Research on residual life prediction of turbine disc-blade under random environment[J].Journal of Aerospace Power,2009,24(8):1677-1683.(in Chinese)
[7]	申文才,杨自春.涡轮盘-片耦合场及接触问题建模与分析的新方法[J].燃气轮机技术,2009:22(1):25-28. SHEN Wencai,YANG Zichun.A new method of modeling and analysis for the coupling field and contact problem of turbine disc-blade[J].Gas Turbine Technology,2009:22(1):25-28.(in Chinese)
[8]	彭茂林,杨自春,曹跃云.涡轮盘-片结构的接触分析[J].热力透平,2009,38(4):238-243. PENG Maolin,YANG Zichun,CAO Yueyun.Touch analysis of turbine disc-blade structure[J].Thermal Turbine,2009,38(4):238-243.(in Chinese)
[9]	郭建亭.高温合金材料学:应用基础理论[M].北京:科学出版社,2008.
[10]	《工程材料实用手册》编辑委员会.工程材料实用手册[M].北京:中国标准出版社,2002.
[11]	彼莱奇科,廖荣锦,默然.连续体和结构的非线性有限元[M].庄茁译.北京:清华大学出版社,2002.
[12]	王勖成.有限单元法[M].北京:清华大学出版社,2003.
[13]	杨自春,倪宁,杨毅.叶轮机械[M].北京:国防工业出版社,2007.
[14]	戴锅生.传热学[M].北京:高等教育出版社,1999.