双层滚珠轴承力学特性分析

朱益利; 徐龙祥

双层滚珠轴承力学特性分析

南京航空航天大学机电学院,南京 210016

基金项目: 国家自然科学基金(50975134)

计量
- 文章访问数: 2200
- HTML浏览量: 96
- PDF量: 37
- 被引次数: 0
出版历程
- 收稿日期: 2010-08-20
- 修回日期: 2010-11-12
- 刊出日期: 2011-08-28

Mechanical research of double-decker ball bearing

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China

摘要

摘要: 基于拟动力学原理,在考虑轴承所承受的径向载荷、轴向载荷、滚珠自身离心力以及陀螺力矩联合载荷作用的影响下,建立双层滚珠轴承在高速及载荷作用下的力学模型,通过MATLAB编程仿真,分析不同载荷参数和结构参数对轴承力学特性的影响,并对计算方法进行了实验验证.研究结果表明:内外两节径关系直接影响到内圈和中圈之间的转速分配关系;径向载荷和轴向载荷对接触角的变化影响较大,直接关系到滚珠轴承的失效情况;工作转速、滚珠的材料、轴向预紧力以及滚珠初始接触角等对轴承的刚度影响较大.研究结果为双层滚珠轴承的设计和应用提供一定的理论依据.
- 双层滚珠轴承 /
- 转速分配 /
- 拟动力学 /
- 非线性方程组 /
- 联合载荷
Abstract: The mechanical model of the double-decker ball bearing was established and the relative calculation program compiled in MATLAB was developed based on the quasi-dynamic method by considering the radial load,axial load,centrifugal force as well as the gyroscopic moment acted on the bearing simultaneously.And the method was verified experimentally.The simulation results show that,the relationship between the inner and outer pitch diameters of the bearing determines the inner and intermediate races' rotate speed distribution.The radial and axial loads affect the ball contact angles relating to the bearing failure.Rotate speed,ball materials,axial preload as well as the initial contact angles greatly impact the bearing stiffness.The results provide a theoretical basis for the design and use of this bearing in high-speed rotor-bearing system.
- double-decker ball bearing /
- rotate speed distribution /
- quasi-dynamic /
- nonlinear equation /
- combined load

HTML

参考文献(15)

[1]	林基恕.航空发动机主轴滚动轴承的技术进展[J].燃气涡轮试验与研究,2003,16(4):52-56. LIN Jishu.Technical advance in rolling bearing of aero-engine shaft [J].Gas Turbine Experiment and Research, 2003,16(4):52-56.(in Chinese)
[2]	Prashad H.A new generation double high precision rolling-element concept,development and investigations[J].Trib.Trans.,2001,44(2):204-208.
[3]	Prashad H.A new generation rolling-element bearing—an investigation[J].BHEL,2002,23(2):43-56.
[4]	Liao N T,Lin J F.A new method for the analysis of deformation and load in a ball bearing with variable contact angle[J].Journal of Mechanical Design,Transactions of ASME,2001,123(2):304-312.
[5]	Panda K C.Optimum support characteristics for rotor-shaft system with preloaded rolling element bearings [J].Journal of Sound and Vibration,2003,260(4):731-755.
[6]	Hernot X,Sartor M,Guillot J.Calculation of the stiffness matrix of angular contact ball bearings by using the analytical approach[J].Journal of Mechanical Design,Transactions of the ASME,2000,122(1):83-90.
[7]	Hoeprich M R.Rolling element bearing contact geometry analysis[J].Tribology Transactions,1995,38(4):879-882.
[8]	Harris T A.Rolling bearing analysis[M].4th ed.New York:John Wiley and Sons,Inc.,2001.
[9]	Walters C T.The dynamics of ball bearings[J].Trans.ASME,Journal of Lubrication Technology,1971,93(1):1-10.
[10]	Meck C R,Tran L.Ball bearing dynamic analysis using computer methods Part 1:analysis[J].Journal of Tribology,1996,118(1):52-58.
[11]	Hosang G W.Experimental and computed performance characteristics of high-speed silicon nitride hybrid ball bearings[J].Transactions of the ASME,Journal of Engineering for Gas Turbines and Power,1991,113(10):635-642.
[12]	张成铁,陈国定,李建华.高速滚动轴承的动力学分析[J].机械科学与技术,1997,16(1):136-139. ZHANG Chengtie,CHEN Guoding,LI Jianhua.Dynamic analysis of high speed roller bearings[J].Journal of Mechanical Science and Technology,1997,16(1):136-139.(in Chinese)
[13]	李锦标,吴林丰.高速滚子轴承的动力学分析[J].航空学报,1992,13(12):B625-B632. LI Jinbiao,WU Linfeng.Dynamic analysis of high-speed rolling bearings[J].Acta Aeronautica et Astronautica Sinica,1992,13(12):B625-B632.(in Chinese)
[14]	唐云冰,高德平,罗贵火.航空发动机高速滚珠轴承力学特性分析和研究[J].航空动力学报,2006,21(2):354-359. TANG Yunbing,GAO Deping,LUO Guihuo.Research of aero-engine high-speed ball bearing[J].Journal of Aero-space Power,2006,21(2):354-360.(in Chinese)
[15]	冈本纯三.球轴承的设计计算[M].黄志强,译.北京:机械工业出版社,2004.