复杂构件MDO六面体网格重构方法

王荣桥; 贾志刚; 樊江; 胡殿印; 申秀丽

复杂构件MDO六面体网格重构方法

北京航空航天大学能源与动力工程学院,北京 100191

计量
- 文章访问数: 1657
- HTML浏览量: 67
- PDF量: 17
- 被引次数: 0
出版历程
- 收稿日期: 2010-09-16
- 修回日期: 2011-05-13
- 刊出日期: 2011-09-28

Hexahedral mesh regeneration method for MDO on complex aero-engine components

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 从参数化模型和模型拓扑特征出发,提出了一套六面体网格重构的有限元模型建模方法.同时,使用随动点来约束网格的拓扑边界,保证网格的正交性,确保了网格重构后的网格质量;结合现有的商用软件ICEM的网格生成算法,开发了基于特征的参数化有限元(FE)建模程序.最终,针对航空发动机低压涡轮带冠叶片的叶冠参数进行的多学科优化 (MDO),实例验证了网格重构方法的有效性和可行性.
- 网格重构 /
- 随动点 /
- 拓扑特征 /
- 基于特征的参数化有限元(FE)模型 /
- 多学科优化
Abstract: A set of hexahedral mesh regeneration modeling method was presented in this paper based on the tools of both the parametric model and topological characteristic.The parametric fixed points were designed on the local where the optimized parameters exit,while their function was to constraint the meshing topology boundary and then ensure the orthogonality of the grid and the quality of mesh regeneration.Further,the feature-based parametric finite element (FE) modeling method was developed from the mesh generation algorithm of ICEM.Finally,testing the case of the MDO (multidisciplinary design optimizationon) on the low pressure turbine shrouded blade,the method of the mesh regeneration showed in this paper is effective.
- mesh regeneration /
- parametric fixed point /
- topological characteristics /
- feature-based parametric finite element (FE) modeling /
- multidisciplinary design optimization (MDO)

HTML

参考文献(12)

[1]	杨俊杰,王荣桥,樊江,等.涡轮叶片的气动-热-结构多学科设计优化研究[J].航空动力学报, 2010,25(3):617-622. YANG Junjie,WANG Rongqiao,FAN Jiang,et al.Multi-disciplinary aerodynamic-thermal-structure design optimization for turbine blade[J].Journal of Aerospace Power, 2010,25(3):617-622.(in Chinese)
[2]	田文正,王荣桥.基于MDO体系的涡轮叶片热-结构耦合分析[J].航空发动机,2008,34(2):5-9. TIAN Wenzheng,WANG Rongqiao.Coupled thermal-structural analysis of turbine blade based on MDO system[J].Aeroengine,2008,34(2):5-9.(in Chinese)
[3]	Baker M L,Munson M J,Alston K Y,et al.Integrated hypersonic aeromechanics tool (IHAT) .AIAA 2003-6952,2003.
[4]	Costa V,Oliveira L,Figueired A.A control volume based finite element method for three-dimensional incompressible turbulent fluid flow,heat transfer and related phenomena[J].International Journal for Numerical Methods in Fluids,1995,21(5):591-613.
[5]	Cifuentes A O,Kalbag A.A performance study of tetrahedral and hexahedral elements in 3-D finite element analysis [J].Finite Elements in Analysis and Design,1992,12(3-4):313-318.
[6]	Ramos A,Simoes J.Tetrahedral versus hexahedral finite elements in numerical modeling of the proximal femur[J].Medical Engineering and Physics,2006 ,28(9):916-924.
[7]	Kiran H S,Srinivas C T,Nicole M G.Feature-based multiblock finite element mesh generation[J].Computer-aided Design,2010,42(12):1108-1116.
[8]	张健乔,刘永红,吕广忠.基于参数化模型特征的有限元网格划分方法研究[J].制造业自动化,2008,27(8):33-36. ZHANG Jianqiao,LIU Yonghong,LV Guangzhong.The FEM generation method based on characteristic[J].Manufacturing Automation,2008,27(8):33-36.(in Chinese)
[9]	Shivanna K H,Tadepalli S C,Grosland N M.Feature-based multiblock finite element mesh generation[J].Computer-Aided Design,2010,42(3):1108-1116.
[10]	关振群,宋超,顾元宪,等.有限元网格生成方法研究的新进展[J].计算机辅助设计与图形学学报,2003,15(1):1-14. GUAN Zhenqun,SONG Chao,GU Yuanxian,et al.Rencent advances of research on finite element mesh generation methods[J].Journal of Computer-aided Design & Computer Graphics,2003,15(1):1-14.(in Chinese)
[11]	Charles E S,Venkat T,David M,et al.Multidisciplinary analysis and optimization of combustion sub-system using a network-centric approach //42nd AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics,and Material Conference and Exhibit.Seattle,WA: 2001:1-12.
[12]	汤凤,孟光.带冠涡轮叶片的接触分析[J].噪声与振动控制,2005,25(4):5-7. TANG Feng,MENG Guang.Contact analysis of shrouded turbine blade[J].Noise and Vibration Control,2005,25(4):5-7.(in Chinese)