考虑尺寸效应的轮盘应力疲劳概率寿命分析方法

陆山; 张鸿; 唐俊星; 王春光

考虑尺寸效应的轮盘应力疲劳概率寿命分析方法

西北工业大学动力与能源学院,西安 710072

计量
- 文章访问数: 1960
- HTML浏览量: 309
- PDF量: 14
- 被引次数: 0
出版历程
- 收稿日期: 2010-10-18
- 修回日期: 2010-12-27
- 刊出日期: 2011-09-28

Analysis method for the stress fatigue probability life of a disk considering size effect

School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China

摘要

摘要: 针对基于应变寿命模型的体方法对中、长寿命轮盘及模拟件寿命预测精度不准的缺陷,提出了考虑尺寸效应基于应力寿命模型的体方法,将最大应力比作为寿命可靠性计算的一个参数.对轮盘模拟试件进行了考虑尺寸效应的疲劳寿命可靠性分析,计算概率寿命与试验中值寿命相差14％,吻合良好.而传统的应变寿命点方法中值寿命预计结果误差达15倍之多.表明考虑尺寸效应的应力寿命体方法可以用来预估中、长寿命轮盘及模拟件的概率寿命.
- 应力寿命法 /
- 尺寸效应 /
- 可靠性 /
- 体方法 /
- 疲劳寿命 /
- 轮盘
Abstract: Considering the flaw of precision in forecasting the medium-long and long life of disks and simulation specimen with volume method based on the strain life model, volume method based on the stress life model was proposed to compute the life of disks, which considered the size effect. The maximum stress and stress ratio have been taken into the life reliability computation of the disk as parameters. Then the fatigue life reliability of a disk simulation specimen was analyzed by the method given. The difference between computational median life in the method and the experimental median life is only 14%, and they fit well with each other. While the computational median life in the strain based method is only sixteenth of the experimental median life. It is shown that volume method based on the stress life model which considering the size effect can be used to estimate the probabilistic life of the medium-long and long life of disks and simulation specimen.
- stress-life method /
- size effect /
- reliability /
- volume method /
- fatigue life /
- disk

HTML

参考文献(10)

[1]	Peterson R E.Stress concentration factors[M].New York: John Wiley & Sons,1974.
[2]	Neuber H.Theory of notch stresses[M].Virginia:USAEC Office of Technical Information,1961.
[3]	Kuhn P,Hardran H F.An engineering method for estimating notch-size effect in fatigue tests of steel .Report NACA TN 2805,1952.
[4]	Siebel E,Stieler M.Significance of dissimilar stress distributions for cyclic loading[J].Zeitschrift des Vereines Deutscher Ingenieure,1955,97(5):121-131.
[5]	Buch A.Evaluation of size effect in fatigue tests on unnotched specimens and components[J].Archiv Furdas Eisenhuttenwesen,1972,43(4):885-900.
[6]	Weibull W.A statistical distribution function of wide applicability[J].Journal of Applied Mechanics,1951,18(2):293-297.
[7]	李玉春,姚卫星,温卫东.应力场强法在多轴疲劳寿命估算中的应用[J].机械强度,2002,24(2):258-261. LI Yuchun,YAO Weixing,WEN Weidong.Applications of stress field in multi axial fatigue life estimate[J].Journal of Mechanical Strength,2002,24(2):258-261.(in Chinese)
[8]	唐俊星.含夹杂粉末盘概率寿命三维仿真方法与应用 .西安:西北工业大学,2008. TANG Junxing.3D simulation method of probabilistic life of powder metallurgy disk containing inclusions and application .Xi'an:Northwestern Polytechnical University,2008.(in Chinese)
[9]	高德平.机械工程中的有限元法[M].西安:西北工业大学出版社,1993.
[10]	杨剑秋.轮盘应力寿命可靠性分析方法研究及应用 .西安:西北工业大学,2006. YANG Jianqiu.Application and research on the method for stress based life and its reliability analyses of disc .Xi'an:Northwestern Polytechnical University,2006.(in Chinese)