冲击 +同向对流+气膜冷却的三维壁温 计算与分析

王梅娟; 宋双文; 胡好生; 彭剑勇

冲击 +同向对流+气膜冷却的三维壁温计算与分析

中国航空工业集团公司中国航空动力机械研究所,湖南株洲 412002

计量
- 文章访问数: 1475
- HTML浏览量: 1
- PDF量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2010-11-22
- 修回日期: 2011-01-12
- 刊出日期: 2011-10-28

Numerical computation and analysis of three-dimensional wall temperature of impingement+identical flow convection+film composite cooling

China Aviation Powerplant Research Institute, Aviation Industry Corporation of China, Zhuzhou Hunan 412002, China

摘要

摘要: 采用Fluent 6.3软件对冲击+同向对流+气膜冷却结构的壁温进行了流固耦合传热计算,获得了该复合冷却结构的壁温和冷却效果分布规律,并将计算结果与试验结果进行了对比.结果表明:冲击+同向对流+气膜冷却具有壁温分布均匀、冷却效果好等优点.计算结果与试验结果的分布趋势一致,最大相对误差为3.6%.
- 火焰筒 /
- 冲击冷却 /
- 同向对流 /
- 气膜冷却 /
- 壁温 /
- 流固耦合 /
- 数值计算
Abstract: Fluid/solid conjugated heat transfer numerical computation was conducted to study impingement+identical flow convection+film composite cooling by using Fluent 6.3,and the trend of wall temperature field and the cooling effect were obtained,and then the computational results were compared with the testing results.The results indicate that the wall temperature distribution of the composite cooling is well-proportioned,and the cooling effect is better.The numerical results are in good agreement with the testing results,with their maximal relative error of 3.6%.
- flame tube /
- impinging cooling /
- identical convection /
- film cooling /
- wall temperature /
- fluid/solid conjugated /
- numerical computation

HTML

参考文献(13)

[1]	Meller A M.Design of modern turbine combustor[M].New York:Academic Press Inc.,1990.
[2]	Lefebvre A H.Gas turbine combustion[M].New York:Hemisphere Publishing Corporation,1983.
[3]	刘高恩,吴文东.高效节能发动机文集(第四分册)[M].北京:航空工业出版社,1991.
[4]	Harris M M,Marsh D N,Vos E A.Flex cycle combustor development and demonstration[J].Journal of Engineering for Gas Turbines and Power,1994,116(3):534-541.
[5]	金捷,马继华,金如山.燃烧室室壁冲击/气膜复合冷却壁温分布研究(一)实验部分[J].推进技术,1994,15(1):14-17. JIN Jie,MA Jihua,JIN Rushan.Studies on the distribution of wall temperature of impingement and film cooling of combustion chambers (1) experimentally[J].Journal of Propulsion Technology,1994,15(1):14-17.(in Chinese)
[6]	金捷,马继华,金如山.燃烧室室壁冲击/气膜复合冷却壁温分布研究(二)理论部分[J].推进技术,1994,15(2):34-40. JIN Jie,MA Jihua,JIN Rushan.Studies on the distribution of wall temperature of impingement and film cooling of combustion chambers (2) theoretically[J].Journal of Propulsion Technology,1994,15(2):34-40.(in Chinese)
[7]	俞伯良,李继保.单、双层壁火焰筒壁面冷却效果比较试验研究[J].燃气涡轮与试验研究,1999,12(2):14-17. YU Boliang,LI Jibao.The expetimental study of cooling effectiveness of single/double wall flame tube[J].Gas Turbine Experiment and Research,1999,12(2):14-17.(in Chinese)
[8]	宋双文,杨卫华,胡好生,等.冲击+逆向对流+气膜冷却传热特性的研究[J].航空动力学报,2007,22(9):1417-1422. SONG Shuangwen,YANG Weihua,HU Haosheng,et al. Experimental study of the heat transfer characteristics of combined cooling of impingement + reversed convection + film [J].Journal of Aerospace Power,2007,22(9):1417-1422.(in Chinese)
[9]	Wieting A R,Dechaumphai P,Bey K S,et al.Application of integrated fluid-thermal-structural analysis methods . NASA-TM-100625,1988.
[10]	Thornton E A.Coupled flow thermal and structural analysis of aerodynamically heated panels[J].Journal of Aircraft,1988,25(11):1052-1059.
[11]	陶文铨.数值传热学[M].2版.西安:西安交通大学出版社,2001.
[12]	李彬,吉洪湖,江义军.燃烧室壁冲击-逆向对流-气膜冷却特性的数值研究[J].航空动力学报,2007,22(3):365-369. LI Bin,JI Honghu,JIANG Yijun.Numerical simulation for impingement-counterflow convection-film cooling of a combustion wall[J].Journal of Aerospace Power,2007,22(3):365-369.(in Chinese)
[13]	全栋梁,刘松龄,李江海,等.层板冷却特性的实验与数值模拟研究[J].推进技术,2004,25(2):134-138. QUAN Dongliang,LIU Songling,LI Jianghai,et al.Experimental and numerical investigation of the cooling characteristics in a laminate porous plate[J].Journal of Propulsion Technology,2004,25(2):134-138.(in Chinese)