轴对称推力矢量喷管冷态多柔体动力学仿真

王汉平; 张煜冰; 杨鸣

轴对称推力矢量喷管冷态多柔体动力学仿真

计量
- 文章访问数: 2036
- HTML浏览量: 1
- PDF量: 82
- 被引次数: 0
出版历程
- 收稿日期: 2010-11-16
- 修回日期: 2011-06-23
- 刊出日期: 2011-11-28

Flexible multi-body dynamics simulation of cold state axial-symmetric vectoring exhaust nozzle

摘要

摘要: 采用实体板壳单元对矢量喷管关键部件进行了柔性化,基于机构的树状参数化处理技巧和MSC.ADAMS软件的宏命令批处理技术构建了矢量喷管的多柔体动力学仿真模型,模型中使用点线约束简化了部分接触约束,极大减小了计算规模.仿真了机构的冷态同步、摇头和摆头等工况,获得了机构各环节的受载和动态特性.研究工作对于矢量喷管的热态仿真及其虚拟设计和虚拟实验具有重要指导意义.
- 轴对称推力矢量喷管 /
- 多体动力学 /
- 航空发动机 /
- 虚拟样机 /
- MSC.ADAMS软件
Abstract: The crucial parts of axial-symmetric vectoring exhaust nozzle(AVEN) were meshed into flexible bodies with solid-shell elements.A flexible multi-body dynamics model of AVEN was built based on MSC.ADAMS command batch processing technique and tree-shape parametric technique.A part of contact constraints in the dynamics model were simplified with point-curve constraints to reduce the computational size.By means of simulation of shaking and swinging movement of the AVEN on normal temperature condition,the loading and dynamic characteristics of the mechanism were achieved.Provided an important reference for virtual design and virtual experiment of AVEN.
- axial-symmetric vectoring exhaust nozzle(AVEN) /
- multi-body dynamics /
- aero-engine /
- virtual prototype /
- MSC.ADAMS software

HTML

参考文献(12)

[1]	方昌德.飞机推力矢量技术发展综述[J].航空科学技术,1998(2):10-12. FANG Changde.Overview of thrust vector technique for airplane[J].Journal of Aeronautic Science and Technology,1998(2):10-12.(in Chinese)
[2]	王玉新.喷气发动机轴对称推力矢量喷管[M].北京:国防工业出版社,2006.
[3]	梁春华,张仁,沈迪刚.国外航空发动机推力矢量喷管技术的发展研究[J].航空发动机,1998(1):49-55. LIANG Chunhua,ZHANG Ren,SHEN Digang.The development of foreign aeroengine vectoring exhaust nozzle[J].Aeroengine,1998(1):49-55.(in Chinese)
[4]	杨玉颖.航空轴对称推力矢量控制技术研究 .西安:西北工业大学,2000. YANG Yuying.Study on control technique of aeroengine axial-symmetric vectoring exhaust nozzle .Xi'an:Northwestern Polytechnical University,2000.(in Chinese)
[5]	Van der Veer M R,Strykowski P J.Counterflow thrust vector control of subsonic jets:continuous and bistable regimes[J].Journal of Propulsion and Power,1997,13(3):412-420.
[6]	GAO Yang,BAI Guangchen,YU Linchong.Simulation and reliability analysis of axisymmetric vectoring exhaust nozzle flexible mechanism[J].Journal of System Simulation,2006,18(2):175-178.
[7]	张煜冰.轴对称推力矢量喷管多柔体动力学仿真 .北京:北京理工大学,2010. ZHANG Yubing.Study on flexible multi-body dynamics simulation for axial-symmetric vectoring exhaust nozzle .Beijing:Beijing Institute of Technology,2010.(in Chinese)
[8]	于开平,周传月,谭惠丰.HyperMesh从入门到精通[M].北京:科学出版社,2005.
[9]	张朝晖,李树奎.ANSYS 11.0有限元分析理论与工程应用[M].北京:电子工业出版社,2008.
[10]	陈立平,张云清,任卫群,等.机械系统动力学分析及ADAMS应用教程[M].北京:清华大学出版社,2005.
[11]	邢俊文.MSC.ADAMS/Flex与AutoFlex培训教程[M].北京:科学出版社,2006.
[12]	MSC Software.MSC.ADAMS/View高级培训教程[M]邢俊文,译.北京:清华大学出版社,2004.