基于遗传算法的火焰筒浮动瓦块热-结构耦合优化分析

高建辉; 温卫东; 崔海涛

基于遗传算法的火焰筒浮动瓦块热-结构耦合优化分析

南京航空航天大学能源与动力学院,南京 210016

计量
- 文章访问数: 1698
- HTML浏览量: 198
- PDF量: 444
- 被引次数: 0
出版历程
- 收稿日期: 2011-06-22
- 修回日期: 2011-08-30
- 刊出日期: 2012-01-28

Genetic algorithm model-based optimization for float-wall with thermal-structural coupled

College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 以火焰筒浮动瓦块结构为研究对象,将遗传算法和“穷举搜索法”相结合,采用二步递进策略对浮动瓦块进行了热-结构耦合优化分析.首先利用遗传算法对瓦块结构中安装螺栓杆的位置变量进行优化;然后利用“穷举搜索法”对瓦块的厚度和螺栓杆直径进行优化.通过优化分析得到了结构性能更优的瓦块结构方案,使其最大应力比降低了22.77%.结果表明遗传算法和“穷举搜索法”相结合的优化方法应用在浮动瓦块的结构优化设计中是有效、合理的.
- 火焰筒 /
- 浮动瓦块 /
- 热-结构耦合 /
- 结构优化 /
- 遗传算法
Abstract: Taking the float-wall as the object of study,combined genetic algorithm with exhaustive search,the thermal-structure coupling optimization of float-wall was researched by the way of two-step progression.Using genetic algorithm to carrying out install position optimization;then,using exhaustive search to optimize the thickness and the bolt diameter.A float-wall has more excellent capability was obtained;the stress index was decreased by 22.77%.The results show that the optimal technology applied in optimal design of float-wall is effective and reasonable.
- combustor /
- float-wall /
- thermal-structural coupled /
- structure optimization /
- genetic algorithm

HTML

参考文献(16)

[1]	梁春华.现代典型军民用涡扇发动机的先进技术[J].航空科学技术,2004,90(2):20-24. LIANG Chunhua.Modern typical military and civilian use advanced technology of turbofan engine[J].Aviation Science and Technology,2004,90(2):20-24.(in Chinese)
[2]	赵清杰,李彬.浮动瓦块冷却结构在燃烧室中的应用和发展[J].燃气涡轮试验与研究,2001,14(1):10-13. ZHAO Qingjie,LI Bin.Application and development of floating panel cooling structure in combustors[J].Gas Turbine Experiment and Research,2001,14(1):10-13.(in Chinese)
[3]	Andrews G E,Khalifa I M,Asere A A,et al.Full coverage effusion film cooling with inclined holes.ASME GT95-274,1995.
[4]	Cho H H,Rhee D H,Goldstein R J.Effect of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing.ASME GT2004-53685,2004.
[5]	Rhee D H,Choi J H,Cho H H.Flow and heat (mass) transfer characteristics in an impingement/effusion cooling system with crossflow.ASME GT2002-30474,2002.
[6]	林宇震,俞文利,刘高恩,等.冲击加发散双层壁冷却方式压降分配对斜孔内对流换热影响的研究[J].航空学报,2003,24(2):97-101. LIN Yuzhen,YU Wenli,LIU Gaoen,et al.Influence of pressure drop distribution on the convection heat transfer inside the inclined hole of impingement/effusion cooling[J].Acta Aeronautica et Astronautica Sinica,2003,24(2):97-101.(in Chinese)
[7]	许全宏,林宇震,刘高恩.冲击/发散复合冷却方式发散壁换热系数研究[J].航空动力学报,2004,19(2):213-218. XU Quanhong,LIN Yuzhen,LIU Gaoen.Study of the effusion wall film heat transfer coefficients of impingement/effusion double wall cooling method[J].Journal of Aerospace Power,2004,19(2):213-218.(in Chinese)
[8]	陈焱,吉洪湖,胡娅萍,等.致密微孔壁绝热冷却效果研究[J].工程热物理学报,2006,27(增刊2):25-28. CHEN Yan,JI Honghu,HU Yaping,et al.Investigation of adiabatic cooling effectiveness of an effusion cooled plate[J].Journal of Engineering Thermophysics,2006,27(Suppl 2):25-28.(in Chinese)
[9]	宋双文,杨卫华,胡好生,等.冲击+逆向对流+气膜冷却传热特性的研究[J].航空动力学报,2007,22(9):1418-1421. SONG Shuangwen,YANG Weihua,HU Haosheng,et al.Experimental study of the heat transfer characteristics of combined cooling of impingement+reversed[J].Journal of Aerospace Power,2007,22(9):1418-1421.(in Chinese)
[10]	唐庆如.冲击加多斜孔双层壁对流与冲击换热优化研究[J].航空动力学报,2007,22(3):375-379. TANG Qingru.A study of optimization of convection and heat transfer of impingement/effusion double wall[J].Journal of Aerospace Power,2007,22(3):375-379.(in Chinese)
[11]	李彬,吉洪湖,江义军.冲击-发散冷却火焰筒浮动瓦片三维壁温计算分析[J].航空动力学报,2007,22(3):370-374. LI Bin,JI Honghu,JIANG Yijun.Numerical analysis of 3D temperature field of an impingement-effusion cooled flame tube floating tile[J].Journal of Aerospace Power,2007,22(3):370-374.(in Chinese)
[12]	李彬.冲击-致密微孔浮动壁火焰筒冷却研究.南京:南京航空航天大学,2007. LI Bin.Investigation of impingement/effusion float-wall cooling of fame tube.Nanjing:Nanjing University of Aeronautics and Astronautics,2007.(in Chinese)
[13]	张宏建.燃烧室浮动壁结构优化方法研究.南京:南京航空航天大学,2005. ZHANG Hongjian.Structure optimization method of the float-tile.Nanjing:Nanjing University of Aeronautics and Astronautics,2005.(in Chinese)
[14]	石炜.模糊遗传算法-有限元与浮动壁结构优化研究.南京:南京航空航天大学,2006. SHI Wei.FGA-FEM method and structure optimization of float-wall in combustor.Nanjing:Nanjing University of Aeronautics and Astronautics,2006.(in Chinese)
[15]	孙明华,崔海涛,温卫东.基于精英保留遗传算法的连续结构多约束拓扑优化[J].航空动力学报,2006,21(4):732-737. SUN Minghua,CUI Haitao,WEN Weidong. Topology optimization of continuum structure under multiple onstraints using genetic algorithm with elitist strategy[J].Journal of Aerospace Power,2006,21(4):732-737.(in Chinese)
[16]	葛继科,邱玉辉,吴春明,等.遗传算法研究综述[J].计算机应用研究,2008,25(10):2911-2916. GE Jike,QIU Yuhui,WU Chunming,et al.Summary of genetic algorithms research[J].Application Research of Computers,2008,25(10):2911-2916.(in Chinese)