一种新型涡轮叶间燃烧室的数值模拟

李明; 唐豪; 张超; 程本林; 莫妲

一种新型涡轮叶间燃烧室的数值模拟

南京航空航天大学能源与动力学院,南京 210016

基金项目: 国家自然科学基金(51076064); 江苏省“六大人才高峰”高层次人才培养对象项目

计量
- 文章访问数: 1931
- HTML浏览量: 89
- PDF量: 544
- 被引次数: 0
出版历程
- 收稿日期: 2011-03-17
- 修回日期: 2011-07-03
- 刊出日期: 2012-01-28

Numerical simulation of a novel turbine inter-vane burner

College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 为提高燃气涡轮发动机性能,设计了涡轮叶间燃烧室模型,利用FLUENT软件的Realizable k-ε湍流模型、概率密度函数(PDF)燃烧模型、离散坐标(DO)辐射模型和离散相模型对燃烧室的流动及燃烧进行数值模拟.结果表明:燃烧室燃烧效率高达98.4%,绝对压力损失低至4.2%,气体温度提高700K左右;出口径向温度随无量纲高度呈线性分布;速度、温度、组分分布受高温燃气与主流的掺混程度控制;径向槽(RVC)对促进掺混及改善出口温度场有着积极的影响,其结构值得深入研究.与文献实验数据对比发现:选择的数学模型合理,计算方法可行,其结果可为涡轮叶间燃烧室设计提供参考.
- 气液两相燃烧 /
- 燃气轮机 /
- 涡轮叶间燃烧 /
- 涡轮级间燃烧 /
- 超紧凑燃烧 /
- 数值模拟 /
- 径向槽
Abstract: To improve the performance of gas turbine engines,a turbine inter-vane burner (TIB) was designed.The Realizable k-ε turbulent model,probability density function(PDF) combustion model, discreate ordinates(DO) radiation model and discreate phase model (DPM) of FLUENT were used to simulate the turbulent flow and combustion in the burner.It’s observed that the TIB can increase the gas temperature by about 700K with 98.4% combustion efficiency and 4.2% absolute pressure loss.The radial temperature grows linearly with the dimensionless height.The distribution of the velocity,temperature and species are controlled by the degree of mixing of the combustion products and the main flow.Given the radial vane cavity (RVC) plays an important part in improving the outlet temperature profile,its shape deserves more study.Compared to the literature experimental data,it indicates that the mathematical models and numerical methods are reasonable and the numerical results provide an important reference to the design of TIB.
- gas-liquid two phase combustion /
- gas turbine /
- turbine inter-vane burner /
- inter-stage turbine burner /
- ultra-compact combustion /
- numerical simulation /
- radial vane cavity

HTML

参考文献(18)

[1]	Sirignano W A,Delplanque J P,Liu F.Selected challenges in jet and rocket engine combustion research.AIAA-1997-2701,1997.
[2]	Sirignano W A,Liu F.Performance increases for gas-turbine engines through combustion inside the turbine[J].Journal of Propulsion and Power,1999,15(1):111-118.
[3]	程本林,唐豪,徐夏,等.带TIB的涡扇发动机性能研究[J].航空发动机,2010,36(6):19-22. CHENG Benlin,TANG Hao,XU Xia,et al.Performance study on turbofan engine with turbine inter burner[J].Aeroengine,2010,36(6):19-22.(in Chinese)
[4]	Ramohalli K N R.Isothermal combustion for improved efficiencies.AIAA-1987-1999,1987.
[5]	Liu F,Sirignano W A.Turbojet and turbofan engine performance increases through turbine burners[J].Journal of Propulsion and Power,2001,17(3):695-705.
[6]	Zelina J,Ehret J,Hancock R D,et al.Ultra-compact combustion technology using high swirl for enhanced burning rate.AIAA-2002-3725,2002.
[7]	Mawid M,Thornburg H,Seker B,et al.Numerical analysis of inter-turbine burner (ITB) concepts for improved gas turbine engine performance.AIAA-2005-1162,2005.
[8]	Greenwood R T.Numerical analysis and optimization of the ultra compact combustor.Ala.,US:Department of the Air force,Air University,AD434747,2005.
[9]	Thornburg H,Sekar B,Zelina J,et al.Geometrical parametric studies of inter-turbine burner (ITB) for improved performance.AIAA-2007-5099,2007.
[10]	Thornburg H,Sekar B,Zelina J,et al.Numerical study of an inter-turbine burner (ITB) concept with curved radial vane.AIAA-2007-649,2007.
[11]	Thibaud V M,Tang H.Numerical investigation of turbine inter-blade (TIB) concepts with two different radial vane cavity shapes.Nanjing: 7th International Conference on Computational and Experimental Engineering and Sciences,112010227112,2011.
[12]	Van Moe T.Numerical investigation of ultra-compact combustor models for turbine inter-blade burner (TIB).Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
[13]	Anisko J.Numerical investigation of cavity-vane interactions within the ultra compact combustor.Ala.,US:Department of the Air Force,Air University,ADA449336,2006.
[14]	Lewis G D.Centrifugal-force effects on combustion[J].Symposium (international) on Combustion,1973,14(1):413-419.
[15]	Fluent Inc.FLUENT User's guide[M].New Hampshire US:Fluent Inc.,2006.
[16]	金戈,张志学,顾铭企.QD128航改燃气轮机燃烧室数值模拟[J].航空发动机,2008,34(2):30-35. JIN Ge,ZHANG Zhixue,GU Mingqi.Numerical simulation of QD128 aero-derivative gas turbine combustor[J].Aeroengine,2008,34(2):30-35.(in Chinese)
[17]	蒲宁.航空发动机燃烧室数值仿真中湍流模型的比较研究.沈阳:沈阳航空工业学院,2009. PU Ning.Comparison of turbulent models for aero-engine combustor numerical simulation.Shenyang:Shenyang Institute of Aeronautical Engineering,2009.(in Chinese)
[18]	徐旭常,周力行.燃烧技术手册[M].北京:化学工业出版社,2008.