基于数控切齿的弧线齿面齿轮啮合特性研究
Study on meshing characteristics of face gear drive with arcuate tooth based of manufacture on NC machine
-
摘要: 研究了弧线齿面齿轮的数控切齿及其啮合特性.基于假想产形齿轮的概念,同时考虑了刀具法向截面的修形,推导弧线齿面齿轮的齿面方程;以坐标变换为工具,建立其机床加工模型,确定各运动轴的多项式表达式;在此基础上,建立了考虑安装误差的弧线齿面齿轮副接触分析模型.计算结果表明:通过面齿轮的齿面修形,可以降低啮合转换点处的传动误差幅值,并获得较好的传动误差曲线.
-
关键词:
- 弧线齿面齿轮 /
- 齿面修形 /
- 齿面加工 /
- 轮齿接触分析 (TCA) /
- 传动误差
Abstract: Numerical control machining of face gear with arcuate tooth has been proposed,and the meshing characteristics was investigated.Tooth surface equation that was based on the concept of imaginary gear cutter has been derived,flank modification had also been considered;the machining principle in the general multi-axle numerical control machine tool was created by using coordinate transformation,then the polynomial expression of the motion axes can be obtained;tooth contact analysis(TCA)model under different assembly conditions was established.The numerical results reveal that the bearing contacts are not sensitive to the errors of misalignments,and a more favorable type of parabolic function of transmission errors with better symmetry and reduced amplitude may be obtained according to the modification of the face gear. -
[1] Litvin F L,Fuentes A.Gear geometry and applied theory[M].Cambridge:Cambridge University Press,2004. [2] Litvin F L,Fuentes A,Zanzi C,et al.Design,generation,and stress analysis of two versions of geometry of face-gear drives[J].Mechanism and Machine Theory,2002,37(10):1179-1211. [3] Litvin F L,Gonzalez-Perez I,Fuentes A,et al.Design,generation and stress analysis of face-gear drive with helical pinion[J].Computer Methods in Applied Mechanics and Engineering,2005,194(36-38):3870-3901. [4] Chang S H,Chung T D,Lu S S.Tooth contact analysis of face-gear drives[J].International Journal of Mechanical Sciences,2000,42(3):487-502. [5] 朱如鹏,高德平.在面齿轮设计中避免根切和齿顶变尖的设计方法的研究[J].中国机械工程,1999,10(11):1274-1276. ZHU Rupeng,GAO Deping.Study on the method of avoiding dedendum undercutting and addendum pointing in face gear design[J].China Mechanical Engineering,1999,10(11):1274-1276.(in Chinese) [6] 沈云波,方宗德,赵宁,等.斜齿面齿轮齿宽的设计[J].航空动力学报,2008,23(4):754-758. SHEN Yunbo,FANG Zongde,ZHAO Ning,et al.The design of face width of the face-gear drives with helical pinion[J].Journal of Aerospace Power,2008,23(4):754-758.(in Chinese) [7] 赵宁,曾晓春,郭辉,等.斜齿面齿轮齿面仿真及其轮齿接触分析[J].航空动力学报,2008,23(10):1927-1932. ZHAO Ning,ZENG Xiaochun,Guo Hui,et al.Tooth contact analysis of face gear drive with helical pinion and simulation of the tooth face[J].Journal of Aerospace Power,2008,23(10):1927-1932.(in Chinese) [8] 方宗德,沈云波.弧线齿面齿轮副及其加工方法:中国,200710017256 ,2010-05-19. [9] 方宗德,曹雪梅,沈云波.弧线齿面齿轮的齿面设计与加工[J].航空动力学报,2010,1(25):224-227. FANG Zongde,CAO Xuemei,SHEN Yunbo.Tooth surface design and manufacture for spiral bevel face gear[J].Journal of Aerospace Power,2010,1(25):224-227.(in Chinese) [10] 苏进展,方宗德,曹雪梅.成形法加工的弧线齿面齿轮几何接触分析[J].航空动力学报,2010,25(6):1427-1431. SU Jinzhan,FANG Zongde,CAO Xuemei.Tooth contact analysis of face gear drive with curvilinear shaped tooth by format cutting[J].Journal of Aerospace Power,2010,25(6):1427-1431.(in Chinese) [11] 苏进展,方宗德,曹雪梅.刀倾法数控加工机床调整参数转换[J].农业机械学报,2009,40(11):223-226. SU Jinzhan,FANG Zongde,CAO Xuemei.NC machine settings transformation for tilt method[J].Transactions of the Chinese Society for Agricultural Machinery,2009,40(11):223-226.(in Chinese) [12] 王小椿,吴联银,李彬,等.基于空间运动学的传统机床与Free-Form型机床运动转换方法的研究[J].机械工程学报,2001,37(4):93-98. WANG Xiaochun,WU Lianyin,LI Bin,et al.Study on kinematic transformation from traditional machine tool to Free-Form ones based of spatial kinematics[J].Chinese Journal of Mechanical Engineering,2001,37(4):93-98.(in Chinese) [13] 马振群,王小椿.一种高性能重载齿轮的研究[J].西安交通大学学报,2002,36(3):282-286. MA Zhenqun,WANG Xiaochun.Research on a highly durable and heavy duty gearing[J].Journal of Xi'an Jiaotong University,2002,36(3):282-286.(in Chinese)
点击查看大图
计量
- 文章访问数: 1526
- HTML浏览量: 2
- PDF量: 433
- 被引次数: 0