各向异性多轴近似应力应变分析方法研究及应用

王井科; 杨晓光

各向异性多轴近似应力应变分析方法研究及应用

北京航空航天大学能源与动力工程学院,北京 100191

计量
- 文章访问数: 1520
- HTML浏览量: 0
- PDF量: 808
- 被引次数: 0
出版历程
- 收稿日期: 2011-07-11
- 刊出日期: 2012-06-28

Study and application on anisotropic multiaxial approximate stress and strain analysis method

School of Jet Propulsion,Beijing University of Aeronautics and Astronautics, Beijing 100191,China

摘要

摘要: 用基于Neuber法则的各向异性多轴近似应力应变分析方法,计算了沿不同方向加载时,定向凝固合金DZ125和单晶DD6材料缺口构件,弹塑性应力应变分布以及应力集中处的弹塑性应力-应变响应.同时,将微分形式的、考虑了时间效应的Neuber法则拓展到各向异性多轴保载情形,给出了拉伸保载时缺口根部的应力-应变响应.计算结果显示,单轴循环模拟结果与试验数据吻合,缺口构件循环加载以及拉伸保载预测结果与物理实际相符.证明了基于Neuber法则的各向异性多轴应力应变分析方法,可用于国产定向凝固合金和单晶材料循环加载以及拉伸保载分析.
- Neuber法则 /
- 各向异性 /
- 多轴 /
- 保载 /
- 定向凝固合金 /
- 单晶
Abstract: The multiaxial anisotropic approximate stress-strain analysis method based on Neuber's rule was used to predict the stress and strain response of notched component machined with directionally solidified superalloy DZ125 and single crystal DD6.Different load directions were considered.The approximate analysis model based on differential Neuber's rule,considering the time-dependent creep-plasticity,was extended to anisotropic multiaxial dwell loading simultaneously.Our results show that,the uniaxial simulation results are close to the experimental data,and cyclic loading and dwell loading predictive results conform to physical facts.So,the approximate stress-strain analysis method based on Neuber's rule can be applied on native directionally solidified superalloy and single crystal material.
- Neuber's rule /
- anisotropy /
- multiaxial /
- dwell loading /
- directionally solidified superalloy /
- single crystal

HTML

参考文献(19)

[1]	Topper T H,Wetzel R M,Morrow J.Neuber's rule applied to fatigue of notched specimens[J].Journal of Materials,1969,4(1):200-209.
[2]	Molski K,Glinka G.A method of elastic-plastic stress and strain calculation at a notch root[J].Material Science and Engineering,1981,50(1):93-100.
[3]	Hoffmann M,Seeger T.Generalized method for estimating multiaxial elastic-plastic notch stresses and strains,Part 1:theory Part 2:application and general discussion[J].Journal of Engineering Materials and Technology,Transactions of the ASME,1985,104(4):150-260.
[4]	Glinka G.Energy density approach to calculation of inelastic strain-stress near notches and cracks[J].Engineering Fracture Mechanics,1985,22(3):485-508.
[5]	Glinka G.Calculation of inelastic notch-tip strain-stress hitories under cyclic loading[J].Engineering Fracture Mechanics,1985,22(5):839-854.
[6]	Ellyin F,Kujawski D.Generalization of notch anlysis and its extension to cyclic loading[J].Engineering Fracture Mechanics,1989,32(4):819-826.
[7]	Sharpe W N,Wang K C.Evaluation of a modified monotonic Neuber relation[J].Journal of Engineering Materials and Technology,1991,113(1):1-8.
[8]	Wang K C,Sharpe W N.Evaluation of a modified cyclic Neuber relation[J].Journal of Engineering Materials and Technology,Transactions of the ASME,1991,113(3):350-353.
[9]	Köttgen V B,Barkey M E,Socie D F.Pseudo stress and pseudo strain based approaches to multiaxial notch analysis[J].Fatigue and Fracture of Engineering Materials and Structures,1995,18(9):981-1006.
[10]	Harkegard G,Sorbo S.Applicability of Neuber's rule to the analysis of stress and strain concentration under creep conditions[J].Journal of Engineering Materials and Technology,Transactions of the ASME 1998,120(3):224-229.
[11]	Knop M,Jones R,Molent L,et al.On the Glinka and Neuber methods for calculating notch tip strains under cyclic load spectra[J].Int. J. Fatigue,2000,22(9):743-755.
[12]	Harkegard G,Mann T.Neuber prediction of elastic-plastic strain concentration in notched tensile specimens under large-scale yielding[J].J.Strain Anal Engineering,2003,38(1):79-94.
[13]	Mücke R,Bernhardi O.A constitutive model for anisotropic materials based on Neuber's rule[J].Comput.Method Appl.,2003,192(37-38):4237-4255.
[14]	Nuez J E,Glinka G.Analysis of non-localized creep induced strains and stresses in notches[J].Engineering Fracture Mechanics,2004,71(12):1791-1803.
[15]	Ye D,Matsuoka S,Suzuki N,et al.Further investigation of Neuber's rule and the equivalent strain energy density (ESED) method[J].Int. J. Fatigue,2004,26(5):447-455.
[16]	Bennett V P,McDowell D L.Polycrystal orientation distribution effects on microslip in high cycle fatigue[J].Int. J. Fatigue,2003,25(1):27-39.
[17]	Chaudonneret M,Culie J P.Adaptation Neuber's theory of for stress concentration in viscoplasticity[J].La Recherche Aerospatiale,1985(4):243-250.
[18]	Moftakhar A A,Glinka G,Scarth D,et al.Multiaxial stress-strain creep analysis for notches[M]//Mitchell M R,Buck O.Cyclic deformation,fracture,and nondestructive evaluation of advanced materials:second volume.Philadelphia,PA,USA:American Society for Testing and Materials,1994:230-243.
[19]	Moftakhar A,Buczynski A.Calculation of elasto-plastic strains and stresses in notches under multiaxial loading[J].Int. J. Fracture,1994,70(4):357-373.