固体装药结构界面应力分析

郑晓亚; 柳青; 王卫祥

固体装药结构界面应力分析

1.
西北工业大学航天学院,西安71007
2.
中国航天科工集团第九总体设计部,武汉 430040

计量
- 文章访问数: 1515
- HTML浏览量: 97
- PDF量: 558
- 被引次数: 0
出版历程
- 收稿日期: 2011-09-07
- 刊出日期: 2012-08-28

Interface stress analysis of solid motor grain structure

1.
School of Astronautics, Northwestern Polytechnical University,Xi'an 71007
2.
The 9th Designing of China Aerospace Science Industry,Wuhan 430040,China

摘要

摘要: 研究了基于热黏弹性接触理论计算固体装药结构界面应力的数值方法,给出了一种快速判断界面是否脱黏的工程实用方法.以某固体装药结构为例,采用接触算法模拟固体装药多层结构复杂的边界条件,计算了挂飞工况下固体装药结构应变场特征,研究了壳体/绝热层界面应力的分布规律,结果表明:应变场云图符合工程实际,壳体/绝热层界面黏接良好,不会发生脱黏现象.
- 固体装药 /
- 界面 /
- 黏弹性接触 /
- 人工脱黏层 /
- 有限元法
Abstract: The numerical method based on thermal viscoelastic contact theory was studied.It provided a convenient method to judge whether interface debond occured or not.A solid motor grain structure was taken as an example,and contact arithmetic was applied to simulate multilayer complicated boundary of solid motor grain structure.Strain field was computed under flight condition,and distribution rule of interface stress between case and insulation was researched.Results show that strain field contour agrees with the fact.Interface between case and insulation is ideal and is unable to debond.
- solid motor grain /
- interface /
- viscoelastic contact theory /
- stress release boot /
- finite element method

HTML

参考文献(12)

[1]	王维民,庄福康.固体发动机燃烧室壳体/绝热层界面脱粘类型及解决的技术途径[J].推进技术,1996,17(1):89-91. WANG Weiming,ZHUANG Fukang.Analysis and preventive of debond between case and insulation in solid rocket motor[J].Journal of Propulsion Technology,1996,17(1):89-91.(in Chinese)
[2]	Fraisse P.Use of J-integral as fracture parameter in simplified analysis of bonded joints[J].Int.J.Fracture,1993,63(1):47-59.
[3]	Srinivas M V.Interfacial crack propagation in athin viscoelastic film bonded to an elastic sustrate[J].Int.J.Fracture,1994,65(1):31-47.
[4]	史宏斌,候晓,朱祖念.含缺陷药柱人工脱粘层前缘应力分析[J].固体火箭技术推进技术,1999,22(3):46-49. SHI Hongbin,HOU Xiao,ZHU Zunian.Stress analysis of flap of imperfect grain in consideration of various materials[J].Journal of Solid Rocket Technology,1999,22(3):46-49.(in Chinese)
[5]	许萌萌,胡春波,何国强.固体火箭发动机界面脱粘裂纹分析[J].固体火箭技术,2008,31(2):121-124. XU Mengmeng,HU Chunbo,HE Guoqiang.Analysis on interfacial debond crack of SRM[J].Journal of Solid Rocket Technology,2008,31(2):121-124.(in Chinese)
[6]	蒙上阳,唐国金,雷勇军.固体发动机药柱的裂纹稳定性分析[J].推进技术,2002,23(4):335-338. MENG Shangyang,TANG Guojin,LEI Yongjun.Stability analysis of the crack in solid rocket motor grain[J].Journal of Propulsion Technology,2002,23(4):335-338.(in Chinese)
[7]	蒙上阳,唐国金,雷勇军.固体发动机包覆层与推进剂界面脱粘裂纹稳定性分析[J].固体火箭技术,2004,27(1):46-49. MENG Shangyang,TANG Guojin,LEI Yongjun.Stability analysis of onterfacial debonded crack between propellent and liner of solid rocket motor grain[J].Journal of Solid Rocket Technology,2004,27(1):46-49.(in Chinese)
[8]	袁端才,雷勇军,唐国金,等.长期贮存的固体发动机药柱脱粘界面裂纹分析[J].国防科技大学学报,2006,28(3):19-23 YUAN Duancai,LEI Yongjun,TANG Guojin,et al.Analysis of the interfacial crack in debonded layer of long term storage solid motor grain[J].Journal of National Unversity of Defense Technology,2006,28(3):19-23.(in Chinese)
[9]	蒙上阳,胡光宇,刘兵,等.固体火箭发动机药柱裂纹的 J 积分分析[J].固体火箭技术,2010,33(6):646-649. MENG Shangyang,HU Guangyu,LIU Bing,et al.Analysis of stability of crack in solid rocket motor grain with J- integral.[J].Journal of Solid Rocket Technology,2010,33(6):646-649.(in Chinese)
[10]	张义同.热粘弹性理论[M].天津:天津大学出版社,2002.
[11]	江晓禹,孔祥安.高分子材料的粘弹性摩擦接触力学研究[J].高分析材料科学与工程,2000,16(1):16-19. JIANG Xiaoyu,KONG Xiangan.Mechanical research on viscoelastic frictional contact of polymer[J].Polymer Materials Science and Engineering,2000,16(1):16-19.(in Chinese)
[12]	朱祖念.固体火箭发动机设计与研究[M].北京:宇航出版社,1991.