留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

气氢/气氧同轴剪切单喷嘴燃烧室壁面热流计算与分析

姜金朋,  李茂,  金平,  蔡国飙

downloadPDF
文章导航 > 航空动力学报  > 2012 >  27(8): 1881-1886
姜金朋, 李茂, 金平, 蔡国飙. 气氢/气氧同轴剪切单喷嘴燃烧室壁面热流计算与分析[J]. 航空动力学报, 2012, 27(8): 1881-1886.
引用本文: 姜金朋, 李茂, 金平, 蔡国飙. 气氢/气氧同轴剪切单喷嘴燃烧室壁面热流计算与分析[J]. 航空动力学报, 2012, 27(8): 1881-1886.
shu
JIANG Jin-peng, LI Mao, JIN Ping, CAI Guo-biao. Simulation and analysis of wall heat fluxes for shear coaxial GH2/GO2 single element combustor[J]. Journal of Aerospace Power, 2012, 27(8): 1881-1886.
Citation: JIANG Jin-peng, LI Mao, JIN Ping, CAI Guo-biao. Simulation and analysis of wall heat fluxes for shear coaxial GH2/GO2 single element combustor[J]. Journal of Aerospace Power, 2012, 27(8): 1881-1886.
shu

气氢/气氧同轴剪切单喷嘴燃烧室壁面热流计算与分析

  • 1.

    北京航空航天大学 宇航学院,北京 100191

  • 2.

    中国航天科技集团公司 北京航天试验技术研究所,北京 100074

Simulation and analysis of wall heat fluxes for shear coaxial GH2/GO2 single element combustor

  • 1.

    School of Astronautics, Beijing University of Aeronautics and Astronautics,Beijing 100191,China

  • 2.

    Beijing Institute of Aerospace Testing Technology, China Aerospace Science and Technology Corporation,Beijing 100074,China

    摘要
  • 摘要: 以气氢/气氧为推进剂,采用数值模拟方法,研究了同轴剪切喷嘴设计参数——氢氧速度比和氧压降比对单喷嘴燃烧室内燃烧过程和壁面热载的影响,并将绝热壁面条件、等温壁面条件的计算结果与试验结果进行了对比分析,结果表明:氢氧速度比增大,燃烧性能提高,壁面热载增加;氧压降比增大,燃烧性能下降,壁面热载减小;相比采用壁面绝热燃气温度,采用热流预示燃烧室壁面热载与真实情况更为接近.

     

    Abstract: With gas hydrogen/gas oxygen being propellant,adopting numerical simulation,design parameters of shear coaxial injector,namely ratio of fuel velocity to oxidizer velocity and the ratio of oxidizer pressure drop to combustor pressure have been studied to find their impact on combustion characteristics and thermal loading of chamber wall.The simulation results of two kinds of wall boundary condition which were adiabat condition and isothermal condition were compared with experimental result.It shows that the increasing of the ratio of fuel velocity to oxidizer velocity improves the combustion performance and wall heat flux.The increasing of the ratio of oxidizer pressure drop to combustor pressure decreases the combustion performance and wall heat flux.In comparison with wall gas temperature,wall heat flux is more consistent with the real condition when used to predict thermal loading of combustion chamber wall.

     

    • HTML
    • 参考文献(17)
  • [1] 金平,杜正刚,杨立军,等.气-气喷注器混合场流动显示[J].航空动力学报,2011,26(1):210-216. JIN Ping,DU Zhenggang,YANG Lijun,et al.Flow visualization of gas-gas injector mixing flowfield[J].Journal of Aerospace Power,2011,26(1):210-216.(in Chinese)
    [2] Farhangi S,Yu T,Rojas L.Gas-gas injector technology for full flow combustion cycle application .AIAA-1999-2757,1999.
    [3] Davis J A,Campbell R L.Advantages of a full-flow staged combustion cycle engine system .AIAA-1997-3318,1997.
    [4] Foust M J,Pal S,Santoro R J.Gaseous propellant rocket studies using Raman spectroscopy .AIAA-1996-2766, 1996.
    [5] Jones R A,Groot W A,Myrabo L N,et al.Oxygen temperature and concentration measurements in H2-O2 rocket engines .AIAA-1996-439,1996.
    [6] Lin J,West S,Robert W.CFD code validation of wall heat fluxes for a GO2/GH2 single element combustor .AIAA-2005-4524,2005.
    [7] Tucker P K,Menon S,Merkle C L,et al.An approach to improved credibility of CFD simulations for rocket injector design .AIAA-2007-5572,2007.
    [8] LIAN Chenzhou,Charles L.Merkle.Contrast between steady and time-averaged unsteady combustion simulations .AIAA-2010-371,2010.
    [9] Sozer E,Vaidyanathan A,Segal C,et al.Computational assessment of gaseous reacting flows in single element injector .AIAA-2009-449,2009.
    [10] Cutrone L,Battista F.Assessment of wall-functions κ-ε turbulence models for the prediction of the wall heat flux in rocket combustion chambers .AIAA-2008-4558,2008.
    [11] Sozer E,Hassan E A.Turbulence-chemistry interaction and heat transfer modeling of H2-O2 gaseous injector flows .AIAA-2010-1525,2010.
    [12] Vaidyanathan R,Tucke P K,Papila N,et al.CFD-based design optimization for a single element rocket injector .AIAA-2003-296,2003.
    [13] 李茂.富氢/富氧燃气气-气喷注器仿真与试验研究 .北京:北京航空航天大学,2011. LI Mao.Numerical and experimental study on hydrogen-rich/oxygen-rich gas-gas injectors .Beijing:Beijing University of Aeronautics and Astronautics,2011.(in Chinese)
    [14] 汪小卫,高玉闪,金平,等.单喷嘴大流量气-气喷注器设计与试验[J].航空动力学报,2010,25(3):691-698. WANG Xiaowei,GAO Yushan,JIN Ping,et al.Design and experiment of high flowrate single-element gas-gas injectors[J].Journal of Aerospace Power,2010,25(3):691-698.(in Chinese)
    [15] Sozer E,Vaidyanathan A,Segal C,et al.Computational assessment of gaseous reacting flows in single element injector .AIAA-2009-449,2009.
    [16] Shang M,Chen Y,Paul L.Investigation of chemical kinetics integration algorithms for reacting flows .AIAA-1995-806,1995.
    [17] 高玉闪,杜正刚,金平,等.热沉式燃烧室热载分析[J].航空动力学报,2010,25(11):2619-2624. GAO Yushan,DU Zhenggang,JIN Ping,et al.Investigation on the heat flux of heat sink chamber[J].Journal of Aerospace Power,2010,25(11):2619-2624.(in Chinese)
    • 相关文章
    • 施引文献
  • 资源附件(0)
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  1748
  • HTML浏览量:  75
  • PDF量:  517
  • 被引次数: 0
出版历程
  • 收稿日期:  2011-09-29
  • 刊出日期:  2012-08-28

目录

    /

    返回文章
    返回

    版权所有 © 《航空动力学报》编辑部

    本系统由 北京仁和汇智信息技术有限公司 开发