弧齿锥齿轮低敏感性修形

苏进展; 方宗德

弧齿锥齿轮低敏感性修形

西北工业大学机电学院,西安 710072

基金项目: 国家自然科学基金(51175423)

计量
- 文章访问数: 1816
- HTML浏览量: 138
- PDF量: 540
- 被引次数: 0
出版历程
- 收稿日期: 2011-09-20
- 刊出日期: 2012-08-28

Low sensitivity modification for spiral bevel gears

School of Mechanical Engineering, Northwestern Polytechnical University,Xi'an 710072,China

摘要

摘要: 为了改善航空弧齿锥齿轮的啮合稳定性,提出了齿面低敏感性修形.基于齿面误差和误差敏感性矩阵,建立齿面误差修正模型,用广义逆矩阵的最小二乘法求解超越方程组,获得机床调整参数的修正量;对齿面进行3段抛物线修形,将修形后的齿面作为目标齿面,采用齿面误差修正的方法求得相应的机床调整参数;仿真算例表明:经过低敏感性修形,降低了齿面印痕的误差敏感性、提高了齿轮副的容差范围,但齿根弯曲强度下降了4.28%.因此,通过合理选择齿面修形系数,可降低齿根强度的变化,改善齿轮副啮合稳定性.
- 弧齿锥齿轮 /
- 啮合稳定性 /
- 误差敏感性 /
- 齿面修形 /
- 齿轮强度
Abstract: The methodology of low sensitivity modification was proposed for improving the meshing stability of spiral bevel gears used in aerospace application.Based on tooth surface error and error sensitivity matrix,the model of tooth surface error modified can be developed,the generalized inverse matrix with least square method was adopted to solve the transcendental equations,and the correction quantities can be obtained.Tooth surface modification with three segments parabolic was conducted,and the tooth surface correction model and the relative solutions were applied to obtain correspondingly machine-tool settings adjustment quantities by considering the modified tooth surface as the objective surface.A numerical example presents that the error sensitivity of the contact patterns and the misalignment tolerances can be enhanced by the low sensitivity modification with the root bending strength descending to 4.28%.Therefore,the change of tooth root strength can be fall down and the meshing stability can improved by the properly determination of tooth modification coefficients.
- spiral bevel gears /
- meshing stability /
- error sensitivity /
- tooth surface modification /
- tooth strength

HTML

参考文献(16)

[1]	樊奇,让·德福.格里森专家制造系统(GEMS)开创弧齿锥齿轮及准双曲面齿轮数字化制造新纪元[J].世界制造技术与装备市场,2005(4):87-93. FAN Qi,Dafoe R.Gleason expert manufacturing system(GEMS) opens a new era for digitized manufacturing of spiral bevel and hypoid gears[J].World Manufacturing Engineering & Market,2005(4):86-93.(in Chinese)
[2]	Litvin F L,Zhang Y.Identification and minimization of deviations of real gear tooth surface[J].ASME Journal Mechanical Design,1991,113(3):55-62.
[3]	Litvin F L,Zhang Y,Handschuh R F.Computerized inspection of real surfaces and minimization of their deviations[J].International Journal of Machine Tools and Manufacture,1992,32(1):141-145.
[4]	Litvin F L,Kuan C,Wang J C,et al.Minimization of deviation of gear real tooth surface determined by coordinate measurements[J].ASME Journal of Mechanical Design,1993,115(12):995-1001.
[5]	Gosselin C,Nonaka T,Shiono Y.Identification of the machine setting of real hypoid gear tooth surface[J].ASME Journal Mechanical Design,1998,120(3):429-440.
[6]	Lin C Y,Tsay C B,Fong Z H.Computor-aided manufacturing of spiral bevel and hypoid gears with minimum surface-deviation [J].Mechanism and Machine Theory,1998,33(6):785 -803.
[7]	方宗德,杨宏斌,邓效忠.弧齿锥齿轮齿面优化修正及计算机仿真[J].航空动力学报,2002,17(1):140-144. FANG Zongde,YANG Hongbin,DENG Xiaozhong.Optimal tooth surface correction of spiral bevel gears and computerized simulation[J].Journal of Aerospace Power,2002,17(1):140-144.(in Chinese)
[8]	王军,王小椿,姜虹.螺旋锥齿轮齿面的三坐标测量[J].机械工程学报,2003,39(6):151-154. WANG Jun,WANG Xiaochun,JIANG Hong,et al.Coordinate measurement of tooth surface of spiral bevel gear[J].Chinese Journal of Mechanical Engineering,2003,39(6):151-154.(in Chinese)
[9]	王小椿,王军,姜虹.螺旋锥齿轮的齿面测量及机床加工参数修正[J].机械工程学报,2003,39(8):125-128. WANG Xiaochun,WANG Jun,JIANG Hong,et al.Tooth surface measurement and machine-settings correction of spiral bevel gears[J].Chinese Journal of Mechanical Engineering,2003,39(8):125-128.(in Chinese)
[10]	FAN Qi,Dafoe R,Swanger J W.Higher-order tooth flank form error correction for face-milled spiral bevel and hypoid gears[J].ASME Journal of Mechanical Design,2008,130(7):072601(7 pages).
[11]	Fan Q.Tooth surface error correction for face-hobbed hypoid gears[J].ASME,Journal of Mechanical Design,2010,132(1):011004(8 pages).
[12]	Shih Y P,Fong Z H.Flank correction for spiral bevel and hypoid gears on a six-axis CNC hypoid generator[J].ASME,Journal of Mechanical Design,2008,130(6):062604(11 pages).
[13]	方宗德,曹雪梅,张金良.航空弧齿锥齿轮齿面坐标测量的数据处理[J].航空学报,2007,28(2):456-459. FANG Zongde,CAO Xuemei,ZHANG Jinliang.Measuring date processing of aviation spiral bevel gears by using coordinate measurement[J].Acta Aeronautica et Astronautica Sinica,2007,28(2):456-459.(in Chinese)
[14]	Litvin F L,Fuentes A.Gear geometry and applied theory[M].New York:Cambridge University Press,2004.
[15]	方宗德.修形斜齿轮的承载接触分析[J].航空动力学报,1997,12(3):251-254. FANG Zongde.Loaded tooth contact analysis of modified helical gears [J].Journal of Aerospace Power,1997,12(3):251-254.(in Chinese)
[16]	方宗德,郭琳琳,苏进展,等.基于齿面印痕控制的弧齿锥齿轮公差优化设计[J].农业机械学报,2011,42(7):223-228. FANG Zongde,GUO Linlin,SU Jinzhan,et al.Optimal design of tolerance for spiral bevel gears by controlling contact path[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(7):223-228.(in Chinese)