采用改进减缩模型的涡轮叶尖间隙快速分析方法

杨晓光; 黄佳

采用改进减缩模型的涡轮叶尖间隙快速分析方法

杨晓光,
黄佳

北京航空航天大学能源与动力工程学院, 北京 100191

计量
- 文章访问数: 2232
- HTML浏览量: 341
- PDF量: 507
- 被引次数: 0
出版历程
- 收稿日期: 2011-10-17
- 刊出日期: 2012-09-28

Modified reduced model for rapid analysis of tip clearance of high pressure turbine

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 改进了一种预测涡轮叶尖间隙的缩减模型,此模型可模拟发动机各工况下温度、转速和压差对间隙的影响.利用该改进模型在某发动机高压涡轮结构设计中进行叶尖间隙计算,结果显示改进的模型能较好地揭示各工况下叶尖间隙的变化规律.此分析模型只需要输入发动机总体参数、几何参数、基本的材料参数以及传热参数,便能快速得到各个工况下叶尖间隙的变化规律,从而找出最小和最大间隙值及发生时所在工况,可在发动机初步方案设计阶段为叶尖间隙评估提供一种高效率的方法.
- 航空发动机 /
- 高压涡轮 /
- 叶尖间隙 /
- 缩减模型 /
- 数值分析
Abstract: Considering the effects of temperature,rotating speed and pressure difference in engine operating conditions for predicting changes in turbine tip clearance,a modified reduced model was presented.In the process of designing structures for high pressure turbine in an aircraft engine,tip clearance was predicted using this modified model,and results show that the modified model can predict tip clearance changes into engine operating conditions more accurately.By simply inputting geometric,heat transfer,material and population parameters in this model,the variation of tip clearances can be obtaine quickly,and the conditions when the maximum and minimum tip clearance happened can be determined.Therefore,this method can be a way to evaluate tip clearance efficiently during the preliminary design of an aircraft engine.
- aeroengine /
- high pressure turbine (HPT) /
- tip clearance /
- reduced model /
- numerical analysis

HTML

参考文献(17)

[1]	Lattime S B,Steinetz B M.Turbine engine clearance control systems:current practices and future directions. NASA/TM-2002-211794,2002.
[2]	Geisheimer J L,Billington S A,Burgess D W.A microwave blade tip clearance sensor for active clearance control applications. AIAA 2004-3720,2004.
[3]	Melcher K J,Kypuros J.Toward a fast-response active turbine tip clearance control. NASA/TM-2003-212627,2003.
[4]	马玉真.旋转叶片叶尖间隙测量的关键技术研究. 天津:天津大学,2006. MA Yuzhen.The key technique research of blade tip clearance measurement for rotational blades. Tianjin:Tianjin University,2006.(in Chinese)
[5]	房友龙,刘永葆,余又红,等.热和离心力作用下高压涡轮转子的径向变形[J].燃气涡轮试验与研究,2011,24(2):31-35. FANG Youlong,LIU Yongbao,YU Youhong,et al.Radial displacement of HPT rotor caused by the centrifugal and heat[J].Gas Turbine Experiment and Research,2011,24(2):31-35.(in Chinese)
[6]	漆文凯,陈伟.某型航空发动机高压涡轮叶尖间隙数值分析[J].南京航空航天大学学报,2003,35(1):63-67. QI Wenkai,CHEN Wei.Tip clearance numerical analysis of an aero-engine HPT[J].Journal of Nanjing University of Aeronautics and Astronautics,2003,35(1):63-67.(in Chinese)
[7]	岂兴明,朴英,祝剑虹,等.某型航空发动机高压涡轮叶顶间隙三维数值分析[J].航空动力学报,2008,23(5):904-908. QI Xingming,PIAO Ying,ZHU Jianhong,et al.3-D numerical analysis of the tip clearance of an aero-engine high pressure turbine[J].Journal of Aerospace Power,2008,23(5):904-908.(in Chinese)
[8]	张晓波,杨瑞,李其汉.航空发动机涡轮径向间隙设计方法研究[J].航空发动机,2004,30(2):14-18. ZHANG Xiaobo,YANG Rui,LI Qihan.A design method for turbine rotor radial clearance of an aero-engine[J].Aeroengine,2004,30(2):14-18.(in Chinese)
[9]	Melcher K J,Kypuros J.A reduced model for prediction of thermal and rotational effects on turbine tip clearance. NASA/TM-2003-212226,2003.
[10]	Bruce M.Steinetz B M,Lattime S B,et al.Preliminary evaluation of an active clearance control system concept. AIAA 2005-3989,2005.
[11]	Timoshenko S.Theory of elasticity[M].New York:McGraw-Hill Book Company,1970.
[12]	房友龙,刘永葆,贺星,等.离心力作用下涡轮转子的径向变形[J].舰船电子工程,2011,31(2):177-180. FANG Youlong,LIU Yongbao,HE Xing,et al.Study of the radial elongations of the turbine rotor with the centrifugal effect[J].2011,31(2):177-180.(in Chinese)
[13]	葛永乐,吕建成.涡轮机高温零件温度场专题文集:第1集[M].北京:国防工业出版社,1982.
[14]	航空发动机设计手册编委会.航空发动机设计手册:第16 册空气系统及传热分析[M].北京 :航空工业出版社,2000.
[15]	张家锋,邹金文,康进武,等.FGH96粉末高温合金涡轮盘淬火过程界面换热系数的研究[J].航空材料学报,2010,30(1):26-29. ZHANG Jiafeng,ZOU Jinwen,KANG Jinwu,et al.Study on surface heat transfer coefficients of FGH96 P/M superalloy disk during heat treatment process[J].Journal of Aeronautical Materials,2010,30(1):26-29.(in Chinese)
[16]	向安定,罗小强,朱惠人,等.涡轮叶片表面气膜冷却的传热实验研究[J].航空动力学报,2002,17(5):577-581. XIANG Anding,LUO Xiaoqiang,ZHU Huiren,et al.Turbine blade surface heat transfer and film cooling measurements in a turbine cascade with injection on surface[J].Journal of Aerospace Power,2002,17(5):577-581.(in Chinese)
[17]	Kumada M,Iwata S,Obata M,et al.Tip clearance effect on heat transfer and leakage flows on the shroud-wall surface in an axial flow turbine[J].ASME Journal of Turbomachinery,1994,116(37):39-45.